ZANKER KHP623350SA Cooker Hood User Manual
- June 10, 2024
- ZANKER
Table of Contents
ZANKER KHP623350SA Cooker Hood
Product Information
This product is a multifunctional device that includes various features such as:
- Wireless connectivity through Bluetooth and Wi-Fi.
- Printing, scanning, and copying functions.
- Automatic document feeder for efficient scanning and copying.
- High-resolution printing with sharp and vibrant colors.
- User-friendly interface with a touchscreen display.
Product Usage Instructions
To use this product, follow the below instructions:
- Connect the device to a power source and turn it on.
- Connect the device to your computer or mobile device using Bluetooth or Wi-Fi.
- If you want to print a document, load the paper into the input tray and select the print option from your computer or mobile device.
- If you want to scan or copy a document, place it on the scanner bed or in the automatic document feeder, and select the scan or copy option from the touch screen display.
- You can adjust the settings such as paper size, print quality, and color options from the touchscreen display.
- After completing your task, make sure to turn off the device and disconnect it from the power source.
SAFETY INFORMATION AND INSTALLATION
WARNING!
Refer to the separate Installation Instructions booklet for Safety Information
and Installation. Read carefully the Safety chapters before any use or
maintenance of the appliance.
PRODUCT DESCRIPTION
Control panel overview
Function Description
- First Speed The fan switches to the first speed level.
- Second Speed The fan switches to second speed level.
- Third Speed The fan switches to third speed level.
- Lamp Turns the lights on and off.
DAILY USE
Using the hood
Check the recommended speed according to the table below.
- While heating up food, cook with covered pots.
- While cooking with covered pots on multiple cooking zones or burners, gentle frying.
- While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.
It is recommended to leave the hood operating for approximately 15 minutes after cooking.
To operate the hood:
Pull out the drawer of the hood more than 5 cm.
- The control panel is exposed.
- To activate the function press the button.
- If needed, change the speed by pressing the desired button.
- The hood’s light works independently of other hood functions. To illuminate the cooking surface press the light button Closing the drawer has no effect on the hood light.
- To turn off the fan press or close the hood drawer.
- The hood remembers last setting of fan speed on closing the drawer. The hood will operate on this fan speed level when the drawer is pulled out again.
CARE AND CLEANING
Notes on cleaning
Do not use abrasive detergents and brushes.
Clean the surface of the appliance with a soft cloth with warm water and mild
detergent.
Cleaning Agents
-
After cooking some parts of the appliance can get hot. To avoid stains appliance must be cooled down and dried with a clean cloth or paper towels.
Clean stains with a mild detergent. -
Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or another residue may cause a fire.
Keep the hood clean
- Grease filters can be washed in a dishwasher.
- The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance.
Charcoal filter
The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage.
Cleaning the grease filter
Filters are mounted with the use of clips and pins on the opposite side.
To clean the filter:
-
Press the handle of the mounting clip on the filter panel underneath the hood (1).
-
Slightly tilt the front of the filter downwards (2), then pull.
Repeat the first two steps for all filters. -
Clean the filters using a sponge with non abrasive detergents or in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance.
-
To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.
Replacing the charcoal filter – is optional .
WARNING!
The charcoal filter is NON-washable! The filter cannot be regenerated!
To replace the charcoal filter:
-
Remove the grease filters from the appliance.
Refer to “Cleaning the grease filter” in this chapter. -
Turn the filter counterclockwise (1) and then pull (2).
To mount the filters back follow the steps in reverse order.
In any case, it is necessary to replace the filters at least every four
months.
Replacing the lamp This appliance is supplied with a LED lamp and a separate control gear (LED driver). These parts can be replaced by a technician only. In case of any malfunction refer to “Service” in the “Safety Instructions” chapter.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol * with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.zanker.de. www.zanker.de/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>