Roland TrueVIS LG-640 UV Printer or Cutter User Manual

Roland TrueVIS LG-640 UV Printer or Cutter

Product Information

The product is a heavy machine manufactured by Roland DG. It requires suitable equipment and technical skills to handle. The installation of the machine must be performed by trained professionals. The machine should be installed in a location that is level, stable, and able to bear the weight of the machine after checking the weight of the machine in the operation manual on the installation of the machine. The stand’s casters should be locked to prevent accidents. When handling roll media, care must be taken to prevent falls, and it should be done by two or more people. Adequate safety measures must be implemented when storing roll media to ensure that they will not roll, fall, or topple over.

Product Usage Instructions

1. Entrust operations such as transportation, unloading, and emplacement to trained professionals.
2. Install the machine in a location that is level, stable, and able to bear the weight of the machine after checking the weight ofthe machine in the operation manual on the installation of the machine.
3. Lock the stand’s casters to prevent accidents.
4. Handle roll media with care and always do it with two or more people.
5. Implement adequate safety measures when storing roll media to ensure that they will not roll, fall, or topple over.

Safety precautions

Copyright © 2023 Roland DG Corporation R1-230110T http://www.rolanddg.com/

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to proper-ty. Points that must be observed to prevent such injury or damage are described as fol-lows.

Meaning of WARNING and CAUTION

WARNING| Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
---|---
CAUTION| Used for instructions intended to alert the user to the risk of injury or material dam- age should the unit be used improperly.

*Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings as well as to domestic animals or pets.

About the Symbols

****| The  symbol alerts the user to important instructions or warnings.

The specific meaning of the symbol is determined by the design contained within the sym- bol.

The symbol at left means “danger of electrical shock.”

| ****

---|---|---
****| The  symbol alerts the user to items that must never be carried out (are forbidden).

The specific meaning of the symbol is determined by the design contained within the sym- bol.

The symbol at left means the unit must never be disassembled.

| ****

****| The  symbol alerts the user to things that must be carried out.

The specific meaning of the symbol is determined by the design contained within the sym- bol.

The symbol at left means the power-cord plug must be unplugged from the outlet.

| ****

This is a heavy machine

WARNING

**| Entrust operations such as transportation, unloading, and emplacement to trained professionals.**

Suitable equipment and technical skills are required in handling the machine. Tasks that require undue effort may result in a major accident.

---|---
**| Unloading and emplacement are operations that must be performed by the specified number of the workers or more as referring to the opera- tion manual on the installation of the machine.**

Tasks that require undue effort when performed by a small number of persons may result in physical injury. Also, if dropped, such items may cause injury.

**| Install the machine in a location that is level, stable, and able to bear the weight of the machine after checking the weight of the machine in the operation manual on the installation of the machine.**

Installation in an unsuitable location may cause a major accident, including tip over, fall, or collapse.

**| Be sure to lock the stand’s casters.**

If the machine should begin to topple, a major accident may result, including crushing of the parts of your body.

**| Handling roll media is an operation that must be performed by 2 persons or more, and care must be taken to prevent falls.**

Attempting to lift heavy media in a manner that taxes your strength may cause physi- cal injury. Also, if dropped, such items may cause injury.

**| When storing roll media, implement adequate safety measures to ensure that the stored media will not roll, fall, or topple over.**

Danger exists of becoming pinned under the media and suffering serious injury.

Incorrect operation may cause injury

WARNING

**| Always unplug the power cord when attaching or removing parts and op- tional parts and when performing cleaning or maintenance that does not require the machine to be connected to a power source.**

Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.

---|---
**| Keep children away from the machine.**

The machine includes areas and components that pose a hazard to children and may result in injury, blindness, choking, or other serious accident.

**| Never attempt to disassemble, repair, or modify the machine.**

Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service technician.

**| Be sure to follow the operation procedures described in this machine’s documentation. Never allow anyone unfamiliar with the usage or han- dling of the machine to touch it.**

Incorrect usage or handling may lead to an accident.

**| Never operate the machine while tired or after ingesting alcohol or any medication.**

Operation requires unimpaired judgment. Operating with impaired judgment may re- sult in an accident.

CAUTION

**| Conduct operations in a clean, brightly lit location.**

Working in a location that is dark or cluttered may lead to an accident, such as be- coming caught in the machine as the result of an inadvertent stumble.

---|---
**| Never climb or lean on the machine.**

The machine is not made to support a person. Climbing or leaning on the machine may dislodge components and cause a slip or fall, resulting in injury.

**| Caution: cutting tool.**

This machine has a cutting tool. To avoid injury, handle the tool with care.

**| Never attempt operation while wearing a necktie, necklace, or loose clothing. Bind long hair securely.**

Such items may become caught in the machine, resulting in injury.

**| Exercise caution to avoid being pinched or becoming caught.**

Inadvertent contact with certain areas may cause the hand or fingers to be pinched or become caught. Use care when performing operations.

**| Caution: sharp components.**

This machine contains areas that are sharp. To avoid injury, exercise caution.

Danger of electrical short, electrical shock, or fire

WARNING

**| Connect to an electrical outlet that complies with this machine’s ratings (for voltage, frequency, and current).**

Incorrect voltage or insufficient current may cause fire or electrical shock.

---|---
**| If sparks, smoke, burning odors, unusual sounds, or abnormal operation occur, immediately unplug the power cord. Never use if any component is damaged.**

Continuing to use the machine may result in fire, electrical shock, or injury. Contact your authorized Roland DG Corporation dealer.

**| Never use outside or in any location where exposure to water or high humidity may occur. Do not touch the power cord, plug, or electrical outlet with wet hands.**

Doing so may result in fire or electrical shock.

| Never allow any foreign object to get inside. Never expose the machine to liquid spills.

Inserting objects such as coins or matches or allowing beverages to be spilled into the ventilation ports may result in fire or electrical shock. If anything gets inside, imme- diately disconnect the power cord and contact your authorized Roland DG Corpora- tion dealer.

**| Never place any flammable object nearby. Never use a combustible aero- sol spray nearby. Never use in any location where gases can accumulate. Combustion or explosion could occur.
**| Handle the power cord, plug, and electrical outlet correctly and with care. Never use any article that is damaged.

Using a damaged article may result in fire or electrical shock.

**| When using an extension cord or power strip, use one that adequately satisfies the machine’s ratings (for voltage, frequency, and current).**

Use of multiple electrical loads on a single electrical outlet or of a lengthy extension cord may cause fire.

**| Position the machine so that the power plug is within immediate reach at all times.**

This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.

**| For accessories (optional and consumable items, power cord, and the like), use only genuine articles compatible with this machine.**

Incompatible items may lead to an accident.

**| Never use the machine for any purpose for which it is not intended, or use the machine in an excessive manner that exceeds its capacity.**

Doing so may result in injury or fire.

---|---
**| Do not use the supplied power cord for other products.**

__

| Connect to ground.

This can prevent fire or electrical shock due to current leakage in the event of mal- function.

• Important notes about the power cord, plug, and electrical outlet

Danger of fire, burns, or toxic gas emissions

WARNING

**| High Temperature**

Areas such as the heater become hot. Exercise caution to avoid burns.

---|---
**| Remove any loaded media or switch off the sub power when printing is not being performed.**

The continued application of heat at a single location may cause the release of toxic gases from the media or pose a fire hazard.

**| Never use media that cannot withstand heat.**

Doing so may degrade the media, or may result in fire or the release of toxic gases.

**| High Temperature**

The area around the UV-LED device becomes hot. Exercise caution to avoid burns.

Ink, cleaning liquid, and discharged fluid are flammable and toxic.

WARNING

**| Keep open flame away from the work area.**

Ink and discharged fluid are flammable.

---|---

| Never store ink, cleaning liquid, or discharged fluid in any of the follow- ing locations.

•    Any location exposed to open flame

•    Any location where high temperature may occur

•    Near bleach or any other such oxidizing agent or explosive material

•    Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

**| Never place an ink container (such as a cartridge or pouch) in fire.**

Ink may flow out, catch fire, and spread fire to other nearby objects.

**| Never drink or sniff ink, cleaning liquid, or discharged fluid, or allow them to come in contact with the eyes or skin.**

Doing so may be hazardous to your health.

CAUTION

**| Ensure adequate ventilation for the work area.**

Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.

---|---
**| Never allow an ink container (such as a cartridge or pouch) to be sub- jected to impact, and never attempt to disassemble.**

Ink may leak.

IMPORTANT

Refer to the appropriate safety data sheet (SDS) for the following items related to the ink and cleaning liquid.

• Hazards of the included chemical substances
• Handling
• Emergency measures when these toxic substances get on the skin or in the eyes

https://www.rolanddg.com/en/about-us/sustainability/safety-data-sheet

This machine uses ultraviolet light.

CAUTION

**| Do not use this machine if its safety devices do not function. Also, do not use this machine if its protective covers are cracked or deformed.**

Do not allow ultraviolet radiation emitted from the UV lamp to come into direct con- tact with your eyes or skin. Doing so may result in eye or skin injury.

---|---
**| Do not stare at post-exposure reflected light from a close distance for a long period of time.**

Doing so may result in eye injury.

IMPORTANT

Caution: Ultraviolet Light This machine is fitted with covers to keep external leakage of ultraviolet light at low levels, but incorrect handling or operation can lead to physical injury due to ultraviolet light. The extent of injury depends on the intensity and wavelength of the ultraviolet light, and the length of time of exposure. Prolonged exposure to strong ultraviolet light of hazardous wavelengths can cause injury to the eyes or skin. Exercise caution.

Warning Labels

Warning labels are affixed to the machine to make areas of danger immediately clear. The meaning of this label is indicated below. Be sure to heed this warning. Also, never remove the labels or allow them to become dirty.

Disclaimers and Standard Information

Company names and product names are trademarks or registered trademarks of their respective holders.
Thank you very much for purchasing this product.

• To ensure correct and safe usage with a full understanding of this product’s performance, please be sure to read through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• This manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please inform Roland DG Corporation.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made using this product.

This product contains the eT-Kernel RTOS-based software platform of eSOL Co., Ltd. Copyright (c) 2012 – 2013, Murata Manufacturing Co., Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

NOTICE

Grounding Instruction

• In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or re-placement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.
• Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole recep-tacles that accept the tool’s plug.
• Repair or replace damaged or worn cord immediately.

For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATE-MENT

• Responsible Party: Roland DGA Corporation
• Address: 15363 Barranca Parkway Irvine, CA 92618, U.S.A.
• Telephone 949-727-2100
• Type of Equipment: Printer
• Model Name: LG-640 LG-540 LG-300

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only I/O cables that have been designed and manufactured specifically for this de- vice.

For Canada
CAN ICES-3 (A)/NMB-3(A)

For EU Countries

Manufacturer: ROLAND DG CORPORATION 1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN The importer in the EU: Roland DG EMEA N.V. Bell Telephonelaan 2G, 2440 Geel, Belgium

For UK

• Manufacturer: ROLAND DG CORPORATION 1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
• The importer in the UK: Roland DG (U.K.) Ltd. Griffin House, Windmill Road, Clevedon Business Park, Clevedon, North Somerset, BS21 6UJ, United Kingdom

For EU Countries

WARNING
Operation of this equipment in a residential environment could cause radio in-terference.

For EU Countries

• This product must be disposed of separately at your local waste recycling center. Do not dispose of in household waste bin.

References

• ローランド ディー.ジー. - 企業情報サイト
• Safety Data Sheets (SDS)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>