SEALEY MLB80SB 50W SMD LED Mini Light Bar Instruction Manual

SEALEY MLB80SB 50W SMD LED Mini Light Bar

Product Information

The SMD LED Mini Light Bar is a 50W magnetic base, single poin fixing model suitable for use with 12/24V power supply. It comes i two models – MLB80MB and MLB80SB. The product is manufactured to a high standard and if used according to the instructions provided, it will give years of trouble-free performance.

Product Usage Instructions

Safety Instructions

• Familiarize yourself with the product’s application and limitations, as well as any specific potential hazards peculiar to the beacon.
• Replace or repair damaged parts with recommended parts only. Do not use non-authorized parts as they may be dangerous and will invalidate the warranty.
• Do not use the beacon for any purpose other than for which it is designed.
• Do not allow children to operate the beacon.
• Do not operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.
• When not in use, switch off the beacon and remove plug from power supply.

Wiring

The black wire should be wired to a suitable earth. The red wire should be wired via a switch to a suitable fused 12V live supply fitted with a 5 amp fuse. The yellow wire should be wired to earth via a momentary switch (negative earth).

Attaching the Light to Your Vehicle

There are two strong magnets on the reverse of the unit that can be used to attach the light to your vehicle. Alternatively, the screw fitting can be used. The screw can be removed from th underside of the light bar by removing the fixing plate. Under the fixing plate, there is a recess for the head of the setscrew to sit in. This will stop the setscrew from turning when tightening the nut.

Switching on and Changing the Light Pattern

There are two buttons on the in-car adapter. One switch (wit LED indicator light) switches the light on and off. The othe switch switches light patterns. There are ten different light patterns to choose from.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Register Your Purchase Here

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SYMBOLS

1. Refer To Instructions
2. Warning! Hot Surfaces
3. Warning! Do Not Look Directly Into Light.

SAFETY

• Familiarise yourself with this product’s application and limitations, as well as any specific potential hazards peculiar to the beacon.
• Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.
• DO NOT use the beacon for any purpose other than for which it is designed.
• DO NOT allow children to operate the beacon.
• DO NOT operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.
• When not in use switch the beacon off and where appropriate remove plug from power supply.

INTRODUCTION

Extremely bright 50W amber SMD LED high intensity mini light bar fitted with magnets on the base. 10 Modules fitted with 8 LEDs, creating a 360° light. Fitted with a 3m cable and 12V vehicle accessory socket. Plug includes two switches, on/off and a momentary switch, giving you the option of 10 different flash patterns. Built-in memory recalls last pattern selected. ECE R65 and R10 Approved for highway use. CE Approved and E-Marked. IP66 rated. Single bolt version available (Model No. MLB80SB).

SPECIFICATION

• Model No: ………………………………………MLB80MB, MLB80SB
• Current Draw in Amps: ……………………. (12V) 2.5A/(24V) 1.2A
• Dimensions: ……………………… (W x D x H) 279 x 165 x 61mm
• IP Rating: ……………………………………………………………….IP66
• Power: …………………………………………………………………..50W
• Supply: ………………………………………………………… 12-24V DC
• Temperature Range: …………………………………-30°C to +50°C

OPERATION

WIRING

• Black wire should be wired to a suitable earth.
• Red wire should be wired via a switch to a suitable fused 12V live supply fitted with a 5 amp fuse.
• Yellow wire should be wired to earth via a momentary switch (negative earth).
• ATTACHING THE LIGHT TO YOUR VEHICLE
• There are two strong magnets on the reverse of the unit. (fig.1)
• ATTACHING THE LIGHT BAR VIA THE SCREW FITTING The screw can be removed from the underside of the light bar by removing the fixing plate. (fig.1)
• Under the fixing plate there is a recess for the head of the setscrew to sit in. This will stop the setscrew from turning when tightening the nut. (fig.2)
• SWITCHING ON AND CHANGING THE LIGHT PATTERN
• There are two buttons on the in car adaptor. One switch (with LED indicator light) switches the light on and off.
• The other switch switches light patterns. (fig.3)

LIGHT PATTERNS

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

REGISTER YOURPURCHASE HERE

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500
sales@sealey.co.uk
www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>