M Solutions MS-SP-USB Omnidirectional Microphone Speaker User Manual
- June 10, 2024
- M Solutions
Table of Contents
M Solutions MS-SP-USB Omnidirectional Microphone Speaker
Overview
- Volume up button
- Call button
- Mute button
- Multi-function button
- Volume down button
- Power button
- Power LED indicato
- Bluetooth LED indicator
- Bluetooth button
- Statusindicator
- USB port for charging output (Type-A)
- Audio output port
- USB port for charging input (Type-C)
Warning
- Do not expose the product to the environment of dripping or splashing, and do not place liquid containers (for example, vases) on the product;
- Do not put the uncovered source of ignition (for example, lighted candles) on the product;
- Keep the product away from directsunlight, open fire or other heatsources;
- If consumers use the power adapterfor powersupply, they should purchase the supporting power adapterthat has obtained CCC certification andmet the standard requirements.
Connection
-
a) Connect to the computer with a USB cable.
Warning: It is improper to connect the USB wire to a cellphone. Please don’t try! -
b) Connect to the computer or mobile equipment via Bluetooth pairing.
When the product is powered on for the first time, it will automatically enter the Bluetooth pairing mode. -
Every time the product is powered on, it is automatically connected to the equipment successfully connected last time (if available).
-
To disconnect the Bluetooth connection, pressthe Bluetooth button again.
Power on/off
- Press and hold the power button for 2 s to turn on the power; the status indicator will be on from top to bottom and then off.
- Press and hold the power button for 2 s to turn off the power; the status indicator will be on from bottom to top and then off.
Power indicator status
- After the product is connected to the computer, it is automatically powered on.
- After no operation within 30 min or no powersupply, it is automatically powered off.
Button control
Light bar indicator status
- The white indicator is on for 2 s. The USB has been connected to the computer.
- The blue indicator is always on. Calling
- Some blue indicators are on. Turn volume up or down.
- They turn red. Mute
- The green indicator is on. Pressthe power button to check the battery level.
Charge
a) Charge the product
Power indicator status
- The red indicator is always on. Under charging
- The white indicator is always on. Fully charged
- The red indicator flashes. Low battery
b) Charging external equipment
- During powering off or charging, the charging output will not be carried out.
- If the remaining battery is less than 10%, the charging output will not be carried out.
Audio output
Connect the external loudspeaker to the AUX jack of the product with an AUX cable (not provided). The audio will be played through the loudspeaker.
Product parameters
Specifications are subject to change without notice.
support@m4sol.com
www.m4sol.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>