Sunco Lighting Barn Light LED 5000K Daylight Dusk to Dawn Installation Guide
- June 10, 2024
- Sunco Lighting
Table of Contents
Sunco Lighting Barn Light LED 5000K Daylight Dusk to Dawn
WARNING
- Turn power off before inspection, installation or removal.
- The installation should be performed by qualified electricians or lighting technicians.
- Before conducting any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool down.
- Do not touch the fixture while it is in service.
- If there is any problem with the fixture, DO turn off the power and DO NOT attempt repair unless you are a qualified technician or a customer service member.
- This luminaire is designed to operate in ambient temperatures ranging from -40’c to 40’c and to be horizontally mounted with the LEDs facing down.
- This product is not available for several special environments, such as places with corrosive gas liquids or high-pressure water vapor.
Wall Mounting
- Place the mounting section of the fixture onto the desired mounting surface, and mark and drill holes for mounting.
- Mount the fixture with the bolts provided. Install the two bottom screws first.
- Place the fixture on the two bottom screws and install the top screw.
- Tighten the top screw first and then tighten the remaining screws.
- Make wiring connections in the fixture. (White to Neutral lead,
- Black to Line lead, Yellow Green to Ground lead)
- Put the cord protection bracket back on the fixture and fix it with the screws provided.
- Installation is completed.
Arm Mounting(Optional)
- Remove the two poles and secure the two pole connections with the bolt provided as shown in the view.
- Using the mounting bracket provided to secure the pole to the wall and tighten the fixing screws.
- Lead the power supply cable and connect it to the fixture input cable. (White to Neutral lead, Black to Line lead, Yellow Green to Ground lead)
- Insert the fixture into the pole, fix the fixture to the light pole through the fitter clamp, and tighten the fixing screws.
- Check that the fixture is firmly installed.
- Installation Completed.
ACCESSORY LIST
Read User Manual Online (PDF format)
Loading......