Coolmetech Stage Hero6 Hybrid ANC Earbuds User Guide
- June 10, 2024
- Coolmetech
Table of Contents
Coolmetech Stage Hero6 Hybrid ANC Earbuds
Product Information
The Stage Hero6 is a pair of hybrid ANC earbuds that come with a charging case, carrying pouch, USB-C charging cable, ear tips (S/M/L), and user manual. It uses Bluetooth 5.2 technology and supports AVRCP1.6, A2DP1.3, HFP1.7, and HSP1.2 protocols for audio decoding. It has a transmission distance of up to 12m indoors with barriers and up to 20m outdoors without barriers. It has four microphones and an impedance of 32 ohms. The frequency response is between 20 Hz and 20 kHz, and the signal-to-noise ratio is greater than 80dB A-weighted. The earbuds have a battery capacity of 3.7V/40mAh, while the charging case has a battery capacity of 3.7V/400mAh. The Stage Hero6 has ANC/Transparent mode with a playtime of up to 28 hours and a normal mode with a playtime of up to 35 hours. The earbuds take 1.5 hours to charge, while the charging case takes 2 hours to charge.
WHAT’S INCLUDE
OVERVIEW
Product Usage Instructions
- Charge the earbuds and the case using the USB-C charging cable. The charging indicator will show red when charging and turn off when fully charged.
- Open the charging case. The earbuds will automatically power on and connect with the last paired device. If not connected, search for “Stage Hero6” from the Bluetooth list and click to pair.
- Insert the earbuds into the canal of your ears and rotate them to fit snugly.
- To check the battery percentage of the case, press the battery indicator button.
- To unpair the earbuds, take them out of the charging case, disconnect “Stage Hero6” from your Bluetooth device, and tap both earbuds six times simultaneously. You will hear a prompt voice “Du Du.”
- The earbuds have different touch functions. To play/pause, tap once on either earbud. To skip to the next/previous track, tap twice on the left/right earbud. To answer/end a call, press for 2 seconds on either earbud. To reject a call, tap three times on either earbud. To activate/deactivate the voice assistant, tap four times on either earbud. To switch between music mode/gaming mode, press for 1.5 seconds on either earbud. To switch between ANC mode/Transparent mode, tap once on either earbud.
Note: When the charging case is at low power or out of power, the earbuds will not automatically power on/off in the charging case. Please power them on/off manually. The earbuds will automatically power off if they are not connected with devices or out of 12 meters of pairing range for 5 minutes. If both earbuds can’t sync together, please power them off then on (auto/manually)or reset the earbuds. When the battery is below 15%, the earbuds will prompt Battery Low every 4 minutes. If below the minimum power, the red light flashes every 0.5 seconds until the earbuds turn off.
WARNING
Note:
- When the charging case is at low power or out of power, the earbuds will not automatically power on/off in the charging case, please power them on/off manually.
- The earbuds will automatically power off if they are not connected with devices or out of 12 meters of pairing range for 5 minutes.
WEARING
- Open the charging case.
- Search “Stage Hero6” from the Bluetooth list and click to pair.
Note:
- The earbuds will automatically connect with the last paired device as soon as the case is open.
- Both earbuds are master, they can be used independently.
- If both earbuds can’t sync together, please power them off then on(auto/manually), or reset the earbuds.
RESET
- Take both earbuds out of the charging case.
- Disconnect “Stage Hero6” from your Bluetooth device.
- Tap 6 times on both earbuds simultaneously, then you will hear a prompt voice “Du Du”.
CHARGING
- Charge the earbuds
- Charge the case
Note: When the battery is below 15%, the earbuds will prompt “Battery Low” every 4 minutes. If below the minimum power, the red light flashes every 0.5 seconds until the earbuds turn off.
TOUCH CONTROL
![Coolmetech-Stage-Hero6-Hybrid-ANC-Earbuds- \(13\)](https://manuals.plus/wp-content/uploads/2023/05/Coolmetech-Stage-Hero6-Hybrid-ANC-Earbuds-13.jpg)
SPECIFICATION
Model | Stage Hero6 |
---|---|
Bluetooth Version | Bluetooth 5.2 |
Support Protocol | AVRCP1.6, A2DP1.3, HFP1.7, HSP1.2 |
Audio Decoding | SBC, AAC, mSBC |
Transmission Distance | Indoor with Barriers≤ 12m Outdoor without |
Barriers≤ 20m
Microphone| Wide Band Speech (4 Mics)
Impedance| 32Ω
SNR| >80dB (A-Weighted)
Frequency Response| 20Hz to 20KHz ±1dB
Battery Capacity| 3.7V / 40mAh (Earbud) / 3.7V / 400mAh (Case)
Playtime| ANC / Transparent Mode: 28 Hours / Normal Mode: 35 Hours
Charging Time| ≤1.5 Hours(Earbud ) ≤2 Hours (Case)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>