FESTOOL CT 15 E Dust Extractor Hepa Cleantec Instruction Manual

: June 10, 2024
: FESTOOL

FESTOOL CT 15 E Dust Extractor Hepa Cleantec

FESTOOL-.CT-15-E-Dust-Extractor-Hepa-Cleantec-
product

Product Information

Mobile Dust Extractors

The Mobile Dust Extractors are designed to remove dust and debris from the environment. The product is available in two models – CT 15 E and CT 25 E. Both models are manufactured in accordance with UK regulations and designated standards. The product comes with a serial number that falls in the specified serial number range of 40000000 – 49999999.

Product Features

Two models available – CT 15 E and CT 25 E
Manufactured in accordance with UK regulations and designated standards
Serial number falls in the specified serial number range of 40000000 – 49999999

Product Usage Instructions

Before using the product, read the safety instructions provided in the user manual carefully.
Connect the mobile dust extractor to the power supply using the provided cable.
Switch on the mobile dust extractor and begin using it to extract dust and debris from the environment.
Adjust the settings of the mobile dust extractor as per your requirements.
After use, switch off the mobile dust extractor and disconnect it from the power supply.
Clean and maintain the product regularly as per the instructions provided in the user manual.
Dispose of the product in an environmentally friendly manner.

Product Symbols

Warning sign indicating general danger
Warning sign indicating risk of electric shock
Instructional sign indicating to read the user manual and safety instructions before use

Safety warnings

WARNING: Read all safety warnings and instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.

Save all safety warnings and instructions for future reference.

This appliance must not be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Children need to be supervised to ensure they do not play with the device.
If this device’s mains power cable is damaged, it must be replaced by an authorised service workshop to prevent it posing a risk.
Always operate with the filter system installed!
Warning: Operators must be appropriately instructed in the use of this machine.
The mains plug must always be disconnected from the socket before performing cleaning or maintenance tasks, when replacing consumables or when converting the machine.
WARNING: Only use the socket outlet on the machine for purposes specified in the instructions.
WARNING: Do not allow the supply cord to come into contact with the rotating brushes.
WARNING: If foam or liquid escapes from the machine, switch off immediately.
CAUTION: Clean the water level limiting device regularly and examine it for signs of damage.
Not suitable for extracting fluids that foam excessively.
WARNING: This machine is not suitable for extracting hazardous dust.
CAUTION: This machine is for indoor use only.
CAUTION: This machine shall be stored indoors only.
Risk of explosion and fire! Do not extract:
- Sparks, glowing particles or hot dust;
- combustible or explosive materials (e.g. magnesium, aluminium, petrol, diluting agents);
- aggressive materials (e.g. acid, alkaline solutions, solvents);
- chemically reactive materials which lead to the generation of heat,acids/bases, gases, etc. (e.g. reactive two-component materials, aluminium and water).
Observe all national safety regulations as well as the material manufacturer’s specifications!
Always use suitable protective equipment!
If intact following a visual inspection, work in a dry environment according to instructions!
Check the plug, the electrical outlet module, the cable and the filter regularly in order to prevent a hazard. Damaged electrical components must be replaced by an authorised service workshop only.
Do not lift or transport using a crane hook or lifting gear.
The mobile dust extractor must not be carried by the suction hose mount [1-3].
Only place the tool on level ground and secure it against rolling away.
This machine must not be used by people who might have a particularly adverse reaction to an electric shock (e.g. people with cardiac pacemakers), because the possibility of the machine building up a static charge cannot be excluded.
Use only the original Festool suction hose.
Pay attention to the work environment and watch out for your own safety and the safety of others when transporting or working with the machine.
In this way, you can for example prevent tripping hazards caused by the suction hose or mains cable.
Keep packaging film away from children.
There is a risk of suffocation.

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and safety instructions.
Read the operating manual and safety warnings.
Do not dispose of it with domestic waste.
Pull out the mains plug
Wear a dust mask.
Do not climb on the unit
UKCA marking: The United Kingdom Conformity Assessed symbol is a marking for products being placed on the market in the United Kingdom. It is a manufacturers indication that the product is in conformance with the relevant regulations in the UK.

Parts of the machine

FESTOOL-.CT-15-E-Dust-Extractor-Hepa-Cleantec-fig-1

[1-1] Electrical outlet module
[1-2] Cable and accessory holder
[1-3] Suction hose mount
[1-4] Handle
[1-5] Lock
[1-6] Filter drawer
[1-7] Locking clip
[1-8] Exhaust opening
[1-9] Dirt trap
[1-10] On/off switch
[1-11] MAN button
[1-12] Suction power adjustment

The specified illustrations appear at the beginning of the Operating Instructions.

Technical data

Mobile dust extractors

Power consumption 350 – 1200 W
Max. electrical outlet module connected load EU 2200 W

CH, DK 1150 W

GB 1610 W

Max. suction capacity (air), extractor/turbine 130 m³/h / 222 m³/h
Max. vacuum, turbine 24,000 Pa
Filter surface area 3508 cm²
Suction hose D 27/32 mm x 3.5 m-rAS
Mains power cable length 5.5 m
Sound pressure level as per EN 60335-2-69/ uncertainty K 70 dB(A)/ 3 dB
Hand-arm vibration value as per EN 60335-2-69/ uncertainty K <2.5 m/s²/ 1.5 m/s²
Type of protection IP X4
Container capacity| CT 15 E                                     15 l
CT 25 E                                     25 l
Dimensions (LxWxH)| CT 15 E                 470x320x430 mm
CT 25 E                 470x320x510 mm
Weight| CT 15 E                                11.2 kg
CT 25 E                                   12 kg

Intended use

Mobile dust extractor suitable for

Extracting non-hazardous dust, dirt, sand and chips,
extracting water,
for increased loads during commercial use, according to IEC/EN 60335-2-69.

The mobile dust extractor is only suitable for indoor use.
The user is liable for improper or non-intended use.

Commissioning

WARNING

Unauthorized voltage or frequency!
Risk of accidents

Observe the specifications on the machine’s name plate.
Observe country-specific regulations.

Initial commissioning

Insert the filter bag [2].
Connect the suction hose[3].

Connecting the mobile dust extractor

WARNING

Risk of injury from uncontrolled tool startup

Before switching on ensure that the connected tool is switched off.

WARNING: Risk of injury from electric current

Insert the mains plug into an earthed socket.
Do not reach into the electrical outlet module on the mobile dust extractor.

While the mobile dust extractor is connected to the mains socket, an electric current is running through electrical outlet module on the mobile dust extractor at all times.

Connecting the mobile dust extractor to a mains socket

The mobile dust extractor is switched off.

Connect the power cable to a mains socket.
The electrical outlet module [1-1] is live.

Switching the mobile dust extractor to standby mode

Press the on/off switch[1-10].
The electrical outlet module [1-1] is live.
- The green LED [1-12] indicates standby mode.

Starting the mobile dust extractor automatically

The mobile dust extractor is in standby mode.
To start the mobile dust extractor automatically: Switch on the connected tool.

Starting the mobile dust extractor manually

The mobile dust extractor is in standby mode.
Press the MAN button [1-11].

Pull the mains plug from the socket when you are not using the mobile dust extractor and before performing any cleaning and maintenance work.

Connecting power tools

WARNING: Risk of injury

Observe the maximum electrical outlet module connected load (see section “Technical data”).
Switch off the power tool.

Connecting a mains-powered power tool to the mobile dust extractor

Connect the power tool to the electrical outlet module [1-1].
The power tool is connected to the mobile dust extractor via the power cable.

Settings

Adjusting the suction power

Press the plus or minus button [1-12] while extracting.

Connecting sleeve

The bypass function of the connecting sleeve prevents strong suction from sanding machines and floor nozzles on smooth surfaces.

Open
- Turn the adjusting ring to the “OPEN” position.
Close
- Turn the adjusting ring to the “CLOSE” position.

Temperature cut-out

A temperature cut-out switches the mobile dust extractor off when it reaches a critical temperature to prevent overheating. The bottom LED [1-12] indicates a fault.

LED lights up red /Excessive temperature

Switch off the mobile dust extractor, and let it cool down.
Switch on the mobile dust extractor again after approx. five minutes.

Working

Dust extraction

Extracting dry materials

Always use a filter bag.

Extracting wet materials/liquids

Warning

Remove the filter bag!
Use a special wet filter.

The dust extraction stops automatically when the maximum fill level is reached. The bottom LED [1-12] lights up red.

Switch off the mobile dust extractor [1-10].
Open the locking clips [1-7] and remove the top section of the machine.
Empty the dirt trap [1-9].

After wet extraction, allow the main filter to dry!
Dry the mobile dust extractor before extracting dry dust.

CAUTION: Hazardous dust

Damage to the respiratory passage
After extracting wet materials, remove the wet filter and replace it with the main filter for dry materials.

CAUTION: Escaping foam and liquids

Switch off and empty the machine immediately.

Exhaust-air outlet

_ CAUTION: _Hazardous dust

Damage to the respiratory passage
Do not blow off any dust!

The exhaust-air outlet offers the option of diverting the exhaust air outside a building using the suction hose.

Open the grille in front of the exhaust opening [1-8].
Insert the suction hose in the exhaust opening [1-8].

Changing the filter bag with minimal dust

Open the locking clips and remove the top section of the machine [2].
Pull the tab on the filter bag until the filter bag opening is fully closed.
The filter bag is now securely closed and can be removed.
Fit the top section of the machine and close the locking clips.

Changing the filter element

FESTOOL-.CT-15-E-Dust-Extractor-Hepa-Cleantec-fig-12

Pull out the used filter drawer [1-6].
Dispose of the used filter drawer in accordance with statutory regulations.
Insert the new filter drawer [1-6].
Order numbers for accessories, filters, and consumables in the Festool catalog or online at “www.festool.com“.
- Only use original Festool accessories and consumables. Only accessories tested and approved by Festool are safe and perfectly adapted to the machine and application.

NOTICE: Damage to the motor

Never extract material without a main filter or with a damaged main filter, as this can damage the motor.

After finishing work

Switch off the mobile dust extractor and pull out the mains plug.
Vacuum and wipe the inside and outside of the mobile dust extractor to clean it.
Empty the dirt trap.
Wind up the mains power cable.
Place the mains power cable [4-1] in the sealable depot. To do so, lay the power cable through the recess [4-2].
Disconnect the suction hose [5-1] and fix it to the mobile dust extractor using the suction hose attachment [1-3].
Regularly clean the fill level sensors [7-1] and check for damage.
Place the mobile dust extractor in a dry room inaccessible to unauthorized users.
The lid of the depot also serves as a storage area for tools.

Service and maintenance

WARNING: Risk of injury, electric shock

Always pull the mains plug from the socket before performing any servicing and maintenance work.
All maintenance and repair work that requires the motor housing to be opened should always be carried out by an authorised service workshop.

Customer service and repairs must only be carried out by the manufacturer or service workshops. Find the nearest address at: www.festool.co.uk/service
Always use original Festool spare parts. Order no. at: www.festool.co.uk/service

Disposal

FESTOOL-.CT-15-E-Dust-Extractor-Hepa-Cleantec-fig-13

S.I. 2008/1597: Supply of Machinery (Safety) Regulations 2008
S.I. 2016/1091: Electromagnetic Compatibility Regulations 2016
S.I. 2012/3032: Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

BS EN 60335-1:2012 + A2:2019
BS EN 60335-2-69:2012
BS EN 62233:2008
BS EN 55014-1:2017
BS EN 55014-2:2015
BS EN IEC 61000-3-2:2019
BS EN 61000-3-3:2013
BS EN IEC 63000:2018

Signed on behalf of and in name of Festool GmbH
Wertstr. 20, 73240 Wendlingen, GERMANY

Place and date of declaration: Wendlingen, 2022-12-15

Markus Stark

Head of Product Development

FESTOOL-.CT-15-E-Dust-Extractor-Hepa-Cleantec-fig-8

Christian Bader
Head of Development Functions

in the specified serial number range (S-Nr.) from 40000000 – 49999999

EU Declaration of Conformity: We declare under sole responsibility that this product complies with all the relevant requirments in the following EU Directi-ves, and following standards or normative documents were applied:

2006/42/EC, 2014/30/EU2, 2014/53/EU3, 2011/65/EU

EN 60335-1:2012 + A11:2014 + A13:2017,
EN 60335-2-69:2012, EN 62233:2008,
EN 55014-1:2017 + A11:20202, EN 55014-2:20152,
EN 61000-3-2:201423, EN 61000-3-3:201323,
EN 300 328 V2.2.2 3, EN 301 489-1 V2.1.13),
EN 300 330 V2.1.13, EN IEC 62311:20203,
EN IEC 63000:2018

CE: Signed on behalf of and in the name of

Festool GmbH

Wertstr. 20, 73240 Wendlingen, GERMANY
Wendlingen, 2022-12-15

in the specified serial number range (S-Nr.) from 40000000 – 49999999
valid for machines without Bluetooth®
valid for machines with Bluetooth®

Environment

Do not dispose of the device in the household waste! Recycle devices, accessories and packaging. Observe applicable national regulations.

In accordance with the European Directive on waste electrical and electronic equipment and implementation in national law, used power tools must be collected separately and handed in for environmentally friendly recycling.
Information on collection points for proper disposal can be found at www.festool.co.uk/recycling.
Information on REACH: www.festool.co.uk/reach