AZZA PSAZ-750G Full Modular Power Supply Power User Manual
- June 10, 2024
- AZZA
Table of Contents
AZZA PSAZ-750G Full Modular Power Supply Power
PRODUCT INFORMATION
The PSAZ-750G is a 750W power supply unit with a gold certification for energy efficiency. It has an AC input voltage range of 100-240Vac and frequency range of 50-60Hz. The power supply unit has a combined power output of 744W and a total power output of 750W. It has a DC output voltage of +12V with a maximum output current of 62A. The unit is equipped with the AZZA ECO Intelligent Thermal Control System that provides silent operation at low loads, improved efficiency, and longer lifespan of the fan. The power supply unit comes with various connectors including ATX 24 x1, 4+4Pin x2, PCIe 12+4 x1, PCIe 6+2 x4, Sata x6, and Molex(PERIPHERAL) x3.
PRODUCT USAGE INSTRUCTION
- Ensure that the power supply unit is compatible with your PC case and RTX40 Series GPU before installing it.
- Install the power supply unit in your PC case using the provided screws.
- Connect the ATX/MB 24 Pin cable to the motherboard and the P8(P4+P4)/P8(P4+P4) cable to the CPU power connector on the motherboard.
- Connect the PCIe cables to the graphics card.
- Connect the SATA and Molex cables to the storage devices and other peripherals respectively.
- Ensure that the cables are properly routed and not blocking any airflow in your PC case.
- If you want to enable the AZZA ECO Intelligent Thermal Control System, use the switch on the power supply unit to turn on the ECO mode.
- Do not push the side panel of your PC case once you have installed the power supply unit and other components, as this may cause the cables to be squeezed and increase the risk of overheating and burning.
FEATURES
- Complies with ATX12V V3.0
- Efficiency ≧ 90% typical load
- Eco semi-fanless fan control switch
- 120mm Smart Sleeve Bearing
- LLC Full Bridge Topology with DC-DC module design
- Japanese electrolytic capacitors
- Support PCIe Gen 5.0 graphics card
- High-quality native 16-pin cable supports 450W output
- Complete protection: OCP/OVP/OPP/SCP/OTP/UVP
- 80 PLUS® Gold certified
SPECIFICATION
| PSAZ-750G | 750W GOLD |
|---|---|
| AC Input | 100-240Vac 50-60Hz 10A Max |
| DC Ouput Voltage | +12V |
| Max Ouput Current | 62A |
| Combined Power | 744W |
| Total Power | 750W |
DIMENSIONS
ECO THERMAL CONTROL SYSTEM
The AZZA ECO Intelligent Thermal Control System provides silent operation at low loads, improved efficiency and longer life span of the fan. Enabled by a simple switch directly on the power supply, the “No Fan Spin” feature is ideal for users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with the AZZA ECO Thermal Control System.
CONNECTORS
CONNECTIVITY AND CABLE LENGTHS
12VHPWR CABLE GUIDE
The 12VHPWR connector and the terminals used in it are much smaller than the previous generation. Through our extensive testing, it appears that bending the wires too close to the connector could result in some of the terminals coming loose or misaligning within the connector itself. This may lead to an uneven load across the other wires, increasing the risk of overheating damage. The risk of this is substantially higher if the bend is done horizontally in relation to the connector orientation (left to right).
RTX 40 Series is bigger than the rest of the models therefore make sure that the width of the case is wide enough for the PSU and RTX40 Series GPU. Once complete install the system, please DO NOT PUSH THE SIDE PANEL otherwise the cable will be squeezed and there will be the risk of OVERHEATING & BURNING.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>