hp KE100 Label Printer User Guide
- June 10, 2024
- HP
Table of Contents
hp KE100 Label Printer
Product Overview
Set up instructions
Powering the printer
- First, connect the AC adapter jack to the printer adapter port.
- Connect the power cord to the AC adapter.
- Connect the power cord to a power source or outlet.
- Connect the USB cable to the back of the label printer.
- Connect the other end of the USB cable to a PC or Mac computer.
- Turn on the printer with the power switch.
Loading the labels
-
Press on the release lever on the side of the printer to unlock the printer cover.
-
Lift the printer cover and place the label between the media holder guides.
NOTE: Make sure the printing side of the label is facing up when placing the label. -
Adjust the media holder guides to hold the type of label you have in place.
NOTE: Once the media holder guides are set, you can continue to load labels through the back of the printer without opening the cover. -
Close the printer cover. Once printer cover is closed, label should align on its own. If it doesn’t, press the feed button to align the label.
NOTE: By default, most platforms are preset to 8.5″ x 11″ labels. Make sure to adjust your label size accordingly based on your printing needs.
Installing the driver
- Install the driver for Mac or PC at hpworksolutions.com/setup to start using your printer.
Pro Tips
- Avoid using poor-quality labels as they can damage the printer.
- Regularly clean the printer head.
- Press the feed button on the printer to skip a blank label.
- If the paper is jammed, turn off the printer and allow the printer head to cool down.
- Open the cover and ensure that the rubber is clean. For cleaning, use an alcohol swab then wait for the area to dry before turning on the printer.
Feed button action guide
LED color guide
LED color
| Problem|
Solution
---|---|---
Yellow solid light| N/A| Printer is getting ready.
Green solid light| N/A| Printer is ready to print.
Slow blinking| Printer is having trouble with| Remove the labels from the
printer. Then, carefully insert the labels back
yellow light| the label or gap sensor may not have recognized media.| into the
printer. Make sure the labels are properly installed in the printer.
| |
Fast-blinking yellow light| The firmware is updating.| Wait for the printer to
finish updating.
Red solid light| Printer cover is open.| Make sure the printer cover is closed
fully before you start to print.
Slow-blinking red light| Label is jammed or labels are running low.| Open the
printer cover and adjust the labels as needed.
Maintenance
Cleaning printer head
- Turn the printer off, remove the power cord and AC adapter, and open the cover.
- Wait until the printer head cools down.
- Clean the printer head using an alcohol swab.
- Wait until the alcohol completely dries before closing the cover.
- Connect the AC adapter and power cord to the printer and print a test page to check that the printer head is clean.
Safety precautions
- Please turn off and unplug the printer when it is not in use for long periods of time.
- Do not bend the power cord excessively or place objects on the cord.
- CAUTION: The printer head can become very hot after printing labels.
- Do not touch the printer head.
- Keep the printer out of reach of children and pets.
- Do not use printer if any parts are missing or damaged.
- Do not attempt to disassemble or repair the printer yourself.
For more information
To watch a quick setup video or to learn more about your HP Label Printer, please visit www.hpworksolutions.com/setup or scan the QR code:
To view the two-year limited warranty, please go to: www.hpworksolutions.com.
Need help?
Get in touch with our knowledgeable customer service team by accessing our
live chat at www.hpworksolutions.com,
emailing us at
support@hpworksolutions.com,
or calling 1-877-424-9746.
HP is a trademark of HP Inc. or its affiliates, used by C&A Marketing, Inc.
under license from HP Inc.
Microsoft, Windows, Windows Server, Windows Vista, and Windows 10 are
trademarks of Microsoft Corporation in the U.S. and/or other countries. Apple,
AirPrint, iPod, iPhone, iPad, App Store, Mac, Macintosh, and OS X are
trademarks of Apple Inc. in the U.S. and other countries.
All other products, brand names, company names, and logos are trademarks of
their respective owners, used merely to identify their respective products,
and are not meant to connote any sponsorship, endorsement, or approval.
© 2022. All Rights Reserved. Made in Korea.
C&A Marketing, Inc. 114 Tived Lane East, Edison, NJ 08837.
References
- Product Setup Guide | HP WorkSolutions
- Compact and Reliable Office Technology by HP WorkSolutions
- Product Setup Guide | HP WorkSolutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>