Beats Solo Pro Wireless Headphones User Guide

June 11, 2024
BEATS

Beats Solo Pro Wireless Headphones User Guide

Beats Solo Pro Wireless Headphones User Guide-
product

Important Safety Information

Listen Responsibly

To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it.

Physiology of the Ear

This decibel (dB) table compares some common sounds and shows how they rank in potential harm to hearing.Beats Solo Pro Wireless Headphones User Guide-
fig-2

Chart information from http://www.nidcd.nih.gov/health/education/teachers/pages/common_sounds.aspx

”…. a typical person can safely listen to an iPod® for 4.6 hours per day at 70% volume.”
”…. knowing the levels one is listening to music at, and for how long is extremely important.”
From http://www.cbc.ca/health/story/2006/10/19/music-earphones.html

Get the most out of your equipment and enjoy great audio performance even at safe levels. Our headphones will allow you to hear more details at lower volume levels than ever before.

Use Responsibly

Do not use headphones when it’s unsafe to do so—while operating a vehicle, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required. It’s dangerous to drive while wearing headphones, and in many places, illegal because it decreases your chances of hearing life-saving sounds outside of your vehicle, such as another car’s horn and emergency vehicle sirens. Please avoid wearing your headphones while driving. Use an FM transmitter to listen to your mobile media devices instead. Learn how to establish a safe listening level and review other important safety guidelines from the Consumer Electronics Association at www.ce.org and the Deafness Research Foundation at www.drf.org.

Using the Remote Mic

Beats ProTM comes equipped with an audio cable that has a built-in remote mic feature for use with phone or music player.

Functions include:

Beats Solo Pro Wireless Headphones User Guide-
fig-3

Note: Functionality varies by device.

  • Play or pause a song or video: Press and release the center button. Repeat to resume.
  • Skip track or backward to next song or video: Press and release the center button twice quickly to skip forward. Press and release three times quickly to skip back.
  • Scan forward or backward through a song or video: In quick motion, press the center button twice, hold on the second press to scan forward. Release when you want to stop scanning. To scan backward, press the center button three times, holding on the third press.
  • Answer or end a call: Press and release the center button once to answer. Repeat to end the call.
  • Decline an incoming call: Press and hold the center button for two seconds, then release. There will be two beeps when you let go to indicate successful operation.
  • Voice Command: Press and hold the center button until voice activation starts up. Functionality will vary by device.
  • Control volume: Press the top button to increase volume. Press the bottom button to decrease volume. Functionality will vary by device.

Connect, Listen and Enjoy

Register Your Beats® Today
www.beatsbydre.com/register

www.beatsbydre.com
facebook.com/beatsbydre
twitter: @beatsbydre

Beats Electronics, LLC
1601 Cloverfield Blvd
Suite 5000N
Santa Monica
CA 90404
©2012 Beats Electronics LLC

Beats Solo Pro Wireless Headphones User Guide

Download PDF:Beats Solo Pro Wireless Headphones User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals