YHDC SCT010T Aperture Split Core Current Transformer Owner’s Manual
- June 11, 2024
- YHDC
Table of Contents
SCT010T
Ф10mmAperture Split core current transformer
Characteristic
- Safety lock buckle, easy to install
- Built-in over-voltage protection device (TVS tube)
- Crimping terminal output
- Suspended type
Product application
- Portable instrument
- Household metering
- Monitor motor load
Product advantage
- Small volume，Light weight
- Low cost
- High turns，High precision
Installation diagram
Primary threading method（Firing line）
-
Open the buckle
-
Open upward
-
Put in lead wire
-
Fasten the buckle
Typical technical index：
- Material of core——Ferrite
- Working voltage——Phase voltage≤720V
- Working temperature——-25℃～+60℃
- Storage temperature——-30℃～+90℃
- Frequency range——50Hz～1KHz
- Dielectric strength——Input（bare conductor）/output AC 800V/1min 5mA 50Hz Output/Outer shell AC 3.5KV/1min 5mA 50Hz
Electrical parameters:（The following parameters are typical values and actual
values will be subject to product testing）
Max. continuous input current: 120% of rated input
Model| Input
current| Output| Turns ratio| Load
resistance| Accuracy| Linearity| Weight
---|---|---|---|---|---|---|---
SCT010T| 20A| 20mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 20A| 5mA| 1：4000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 0.1A| 0.388889| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 50mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 50A| 16.6mA| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 60A| 20mA| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 80mA| 1：1000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 40mA| 1：2000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 80A| 26.6mA| 1：3000| 10Ω| 0.5%/1%| 1%| 45g
SCT010T| 10A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 20A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 30A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 50A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 60A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
SCT010T| 80A| 0.333V| –| built-in| 0.5%/1%| 1%| 45g
*Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring schematic diagram：
Built-in sampling resistance Voltage output type Secondary doesn’t allow short circuit
TVS：Transient voltage suppressor Current output type Secondary doesn’t allow open circuit
Outline size： (in:mm)：
