KV2 audio ESD8 Loudspeaker User Guide
- June 11, 2024
- KV2 audio
Table of Contents
ESD8
FULL RANGE
8 Ohms
Application
Purpose designed as a discreet portable passive loudspeaker for speech and music content
- Corporate presentations and functions
- Full range performance with addition of subwoofers
- Infills
- Close monitoring
- Fixed installations
Introduction
The ESD8 is a compact passive 2-way, high output full-range loudspeaker
incorporating an 8″ trans-coil woofer and a 1″ compression driver coupled to a
wide dispersion horn. Presented conservatively in a unique angled low-profile
Baltic birch enclosure and designed to present exceptional speech and music
definition, the ESD8 provides a smooth hi fidelity response and delivers a
natural sound quality and level that is superior to many larger competing
products.
Ideal as a main system speaker or as an in-fill for larger systems, the
flexible ESD8 can be applied quickly and efficiently on podiums, stands or
suspended.
Connection
The ESD8 features both Speakon (NL4) connectors and a terminal block. The connectors are interconnected in parallel to allow the “daisy chaining” of additional ESD8’s.
PARALLEL CONNECTION OF THE ESD8 (8Ω) – TOTAL IMPEDANCE 2Ω
Installation
Installations should be carried out using KV2 Audio’s horizontal or vertical U
brackets. They are mounted vertically using M10 points located on the side of
the cabinet or in the top handle and bottom M10 plate (supplied with
horizontal bracket) for horizontal fixing and to a mounting post with a
diameter of 35 mm using a support flange.
The ESD8 also features a 35 mm speaker pole mount adapter housed at the bottom
of the cabinet for use with conventional speaker stands and poles.
Drawings
part name: ESD8 “U” HORIZONTAL BRACKET
part number: KVV 987 422
part name: ESD8 “U” VERTICAL BRACKET
part number: KVV 987 421
Frequency response
Horizontal Polarplots
Vertical Polarplots
Specifications
System Acoustic Perfomance
Max SPL Long-term| 120dB
Max SPL Peak| 126dB
-3dB Response| 80Hz to 20kHz
-10dB Response| 62Hz to 28kHz
Recommended Power| 275W
Sensitivity| 94dB
Impedance| 8Ω
Crossover Point| 2.2kHz
High Frequency Section
Acoustic Design| Horn Loaded
High Horn Coverage Horizontal / Vertical| 100° x 100°
Rotatable Horn| Symmetric
Throat Exit Diameter / Diaphragm Size| 1″ / 1.75″
Diaphragm Material| Titanium
Magnet Type| Neodymium
Protection| RMS Limiter
Low Frequency Section
Acoustic Design| Front Loaded, Bass Reflex
Number of Drivers| 1
Woofer Size / Voice Coil Diameter / Design| 8″ / 2″ / Trans coil
Diaphragm Material| Epoxy Reinforced Cellulose
Magnet Type| Neodymium
Protection| Thermal breaker – auto reset
Speaker Input
Speaker Input| 2x Neutrik Speakon®, Terminal Block
Cabinet
Cabinet Material| Baltic birch
Handles| 1
Color| Orange peeled Matt Black or any RAL
Physical Dimensions
Height| 456 mm (17.95″)
Width| 260 mm (10.23″)
Depth| 260 mm (10.23″)
Weight| 13 kg (28.6lbs)
Accessories
HORIZONTAL BRACKET
Horizontal Bracket for ESD8
part name:
ESD8 Horizontal Bracket
part number:
KVV 987 422
description:
– black
– including two connection bolts and bracket
VERTICAL BRACKET
Vertical Bracket for ESD8
part name: ESD8 Vertical Bracket
part number: KVV 987 421
description:
– black
– including two connection bolts
Bracket Top Hat Adapter
part name: Top Hat Adapter
part number: KVV 987 090
description:
– for vertical and horizontal brackets
– including bolts
– black
Speaker pole – universal
part name: KV2-H
part number: KVV 987 292
description: – Heavy duty telescopic speakerpole
– 0,735 to 1,23 m
– diameter 35 mm
– weight 2,2 kg
– max. load 50 kg
– bottom terminal M20
– matte black
Speakon speaker cable 4.15
part name: CABLE SPEAKON 4.15
part number: KVV 987 326
description:
– 4 wire speaker cable
– Speakon NL4 connectors
– 1,5m (5ft)
Speakon speaker cable 4.40
part name: CABLE SPEAKON 4.40
part number: KVV 987 327
description:
– 4 wire speaker cable
– Speakon NL4 connectors
– 4m (13ft)
Speaker cables
part name: 1m – round flexible speaker cable, cross section 2 x 1.5mm
part number: WX 002
part name: 1m – round flexible speaker cable, cross section 4 x 2.5mm
part number: WX 003
part name: SPEAKON NL4
part number: KA 027
part name: ESD, Speakon NL4 wiring positive pin (1 +, 2 + parallel) negative pin (1 -, 2 – parallel)
Recommended maximum speaker cable length
MINIMUM CROSS SECTION [mm2 ]| LENGTH [m], impedance 4Ω| LENGTH
[m], impedance 8Ω| LENGTH [m], impedance 16Ω
---|---|---|---
1.5| 8| 15| 30
2.5| 15| 30| 60
2 x 2.5| 20| 40| 90
4| 25| 50| 100
Warranty
Your ESD8 is covered against defects in material and workmanship.
Refer to your supplier for more details.
Service
In the unlikely event that your product develops a problem, it must be
returned to an authorized distributor, service centre or shipped directly to
the KV2 Audio factory. Because of the complexity of the design and the risk
of electrical shock, all repairs must be attempted only by qualified technical
personnel.
If the unit needs to be shipped back to the factory, it must be sent in its
original carton. If improperly packed, the unit may be damaged.
To obtain service, contact your nearest KV2 Audio Service Centre, Distributor
or Dealer.
The Future of Sound.
Made Perfectly Clear.
KV2 Audio International
Nádražní 936, 399 01 Milevsko
Czech Republic
Tel.: +420 383 809 320
Email: info@kv2audio.com
www.kv2audio.com
KVV120159-00-01-0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>