XPOtool 61191 2 in 1 Mechanic Creeper and Workshop Seat Instruction Manual
- June 11, 2024
- XPOtool
Table of Contents
XPOtool 61191 2 in 1 Mechanic Creeper and Workshop Seat
Product Information
2-in-1 Mechanic Creeper and Workshop Seat
The 2-in-1 Mechanic Creeper and Workshop Seat is a high-quality product
designed to provide users with a versatile and comfortable tool for working on
vehicles. The product can be easily converted from a creeper to a seat,
providing flexibility and convenience during use. The product comes with nuts,
washers, rolls, rear frame, lock pin, middle frame, headrest frame, cushioned
headrest, and lock hole.
Safety Instructions
It is important to follow the safety instructions provided in the manual to prevent material damages and/or personal injuries. Before assembling and commissioning the product, carefully read the instructions. Keep the operation instructions in a safe place.
Assembly Instructions
- Firstly, take out all the components of the product and check if all the parts are present.
- Assemble the rear frame with the middle frame using nuts and washers.
- Attach the rolls at the bottom of the rear frame.
- Attach the headrest frame at the top of the middle frame using nuts and washers.
- Attach the cushioned headrest to the headrest frame.
- Insert the lock pin in the lock hole to convert the creeper to a seat.
It is important to note that reproduction and any commercial use (of parts) of this operating manual requires written permission from WilTec Wildanger Technik GmbH.
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved: Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating man-ual, nor
in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to:
service@wiltec.info or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is: WilTec Wildanger Technik GmbH Königsbenden 12 52249
Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. Atten-tion! To allow for a trouble-free complaint or
return, it is important to contact our customer service team before returning
your goods.
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Warning: Before assembling and commissioning, carefully read the instructions. Disobeying the safety instruc-tions and assembly instructions can cause material damages and/or personal injuries.
- The maximum capacity of 150 kg must not be exceeded.
- Do not stand on the mechanic creeper.
- The mechanic creeper is designed for use on solid and flat surfaces that are able to bear the load. Using the product on a surface other than a solid and flat one can cause load instability and a loss of bearing capacity. This might lead to material damages or personal injuries.
- Do not modify the product in any way.
- If the mechanic creeper does not work properly, if parts are loose, damaged, or missing, it must not be used any further.
- The fabric cover of the mechanic creeper is flammable. Be extremely careful with cigarettes lit or open flames being in the vicinity of the creeper.
Assembly instructions
Connect the three parts of the foam-cushioned mechanic creeper with the four
M8×55 hexagon screws and M8 lock nuts. Tighten the M8 hexagon screws and nuts.
Fix the six guide rolls to the frame of the mechanic creeper
assembled.
Converting the mechanic creeper to a workshop seat
- Pull out the lock pin (5) until unlocking the lock mechanism (lock hole).
- Tilt the middle part of the mechanic creeper towards the end until the lock pin can snap into the locking bar of the workshop seat.
- Fold the front part of the mechanic creeper, the headrest frame (7), to the opposite until it is horizontal.
- Invert the above steps to convert the workshop seat to a mechanic creeper.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com The Tool Experts
Retourenabteilung
WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)