PegPerego Stroller Veloce including Culla Grande Instructions
- June 11, 2024
- PegPerego
Table of Contents
PegPerego Stroller Veloce including Culla Grande
Thank you for choosing a PegPerego product.
WARNING
IMPORTANT: read the instructions carefully before use and keep for future reference. Your child’s safety could be at risk if you do not follow these instructions.
-
WARNING: This product is only suitable for a child who cannot sit up unaided.
-
WARNING: this product is suitable for children who cannot sit unaided, cannotroll and are unable to raise themselves on their hands and knees.
Maximum weight of child: 9 Kg. -
WARNING: only use on a firm, horizontal level and dry surface.
-
WARNING: Do not let other children play unattended near the carry cot.
-
WARNING: do not use if any part of the Culla Grande is broken, torn or missing.
-
Only replacement parts supplied or recommended by the manufacturer/ distributor shall be used.
-
Do not use the item near stairs or steps, near heat sources, open flames or dangerous objects that are within reach of the child.
-
Assembly and preparation of the product must be carried out by adults.
-
WARNING: Before lifting the pram body and when carrying by hand, the backrest and the footrest must be completely flat.
-
WARNING: before lifting the pram body to carry it, ensure the handle bar is fastened correctly in the vertical position.
-
WARNING: before use make sure that all of the attachment mechanisms are connected properly.
-
Do not insert fingers into the mechanisms.
-
Do not use accessories which are not approved by the manufacturer.
-
This product is designed for children from birth up to the weight of 9 kg.
-
WARNING: To avoid injury ensure that the child is kept away when unfolding and folding this product.
-
WARNING: When lying, ensure that the baby’s head is not below the body.
-
Before use, inspect handles and the bottom of the carry cot for checking presence of signs of damage and wear.
-
Make sure the handle bar is in the correct position for use before lifting the Culla Grande.
-
Take into account the ambient temperature and the child’s clothing and ensure that the child is not too cold or too warm.
-
Do not leave anything in the carry cot that could present a danger of suffocation (e.g. non-rigid toys, small parts, pillows, etc.).
-
To prevent the formation of mould, we recommend airing the bassinet regularly. In particular, remove the internal fabric lining from the structure and wipe the base with a dry cloth.
-
During sleep, the internal backrest and footrest (if any) should be lowered completely.
-
For environmental reasons, no UV stabilisers are added to the mattress foam.
The mattress foam may turn yellow as a result. This does not affect the quality of the product or its performance. -
Before unfastening and lifting the bassinet from the frame, adjust the backrest to its lowest position
-
Do not add or use mattresses other than the original one supplied.
COMBINED WITH CHASSIS
- This item is compatible with the following Peg Perego products: Veloce, Vivace.
- WARNING: make sure that all the attachment devices of the Culla Grande are correctly fixed before using.
- WARNING: never leave the child unattended.
The images referring to the textile details may differ from the collection purchased. For more information, consult our website:www.pegperego.com
INSTRUCTIONS FOR USE
Using the pram
-
HOOD: Lift the hood until it clicks. Fasten the 6 buttons on the lower profile.
-
To lower the hood, press on the handle bar while lowering it.
-
FOOT MUFF: Fit the foot muff and button it to the side.
-
The magnets can be used to fasten the foot muff to the hood, to protect the child even more against the elements. Just lift the foot muff as shown.
-
The bassinet has a zip to provide extra ventilation.
-
BACKREST ADJUSTMENT: pull the handle outwards and rotate it clockwise to raise the backrest or anticlockwise to lower it.
-
ADJUSTING THE FOOTREST: If necessary, the area supporting the child’s legs can be raised: Pull the strap on the side under the pram body (fig.a)
When the desired height has been reached, fasten it to the bottom of the pram body (Fig b). Raised footrest (Fig. c). -
To return to the flat position: Unfasten the stFrap from under the pram body (fig.a), press on the mattress (fig.b) until it returns fully to the flat position (fig. c). The strap will withdraw automatically.
-
CARRY HANDLE: the handle bar is fitted with a carry handle.
Before lifting the bassinet, ensure the built-in hood is correctly fastened.
Before lifting the bassinet, make sure the hood is in the correct position for transport.
_ Before unfastening and lifting the bassinet from the frame, adjust the backrest to its lowest position. -
To fasten the bassinet, position it on the frame and press down with both hands until it clicks into place. Always enable the brake on the frame before fastening and unfastening the bassinet. IMPORTANT: Ensure the bassinet is properly fastened.
-
To unfasten the bassinet, lift the two side levers on the joints (fig_1) and release it from the frame (fig_2).
-
REMOVING THE HOOD: To remove the hood, unbutton the 6 buttons on the lower edge.
-
Press the buttons on the two attachments and remove the hood.
-
Remove the two rigid supports.
-
Raise the backrest (fig_a). This makes it easier to remove the mattress (fig_b).
-
Remove the inner lining by opening the two zips on the edge of the Culla Grande.
-
Do the opposite to reposition the lining. When fastening the hood, ensure you insert the rigid supports correctly. Insert the tube bearing the carry handle into the hood’s front slot, ensuring the handle is centred correctly.
-
Finally, slip the second metal support into the hood’s inner slot.
-
Fasten the hood to the appropriate supports and fasten the 6 buttons.
Padding cleaning instructions
Brush the fabric parts to remove dust.
- When washing, closely follow the instructions stated on the label sewn into the cover.
- Do not use chlorine bleach.
- Do not iron.
- Do not dry clean.
- Do not remove stains with solvents and do not tumble dry
Product cleaning
-
This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults. -
Keep all moving parts clean and if necessary lubricate them with light oil.
-
Clean the plastic parts periodically with a damp cloth. Do not use solvents or similar substances.
-
Brush the fabric parts to remove dust.
-
Do not clean the polystyrene shock absorbing device with solvents or other similar products.
-
Protect the product from atmospheric agents: humidity, rain or snow. Extended exposure to sunshine can cause colour changes in many materials.
-
Store the product in a dry environment.
-
Remember to regularly ventilate the interior of the carrycot.
Culla Grande car kit
- Culla Grande can be installed in your vehicle by purchasing the Culla Grande Car Kit.
- Only the Culla Grande Car Kit should be used to fasten to Culla Grande to your vehicle securely.
The Original Accessory PegPerego
PegPerego accessories are designed as a useful, practical means of simplifying the lives of parents. Discover all your product’s accessories on www.pegperego.com.
Serial numbers
Information about the production date of Culla Grande can be found internally and on the side of the body by pulling back the Culla Grande lining. Product name, production date and serial number. This information isrequired for any complaints.
PegPerego S.p.A.
PegPerego SpA adopts a quality management system certified by TÜV Italia Srl in accordance with the ISO 9001 standard. PegPerego can make changes at any time to the models described in this publication for technical or commercial reasons.
PegPerego after-sales service
If any parts of the item get lost or damaged, only use genuine PegPerego spare parts. For any repairs, replacements, information on the products and sales of genuine spare parts and accessories, contact the PegPerego Assistance Service and state the serial number of the product.
tel. 0039/039/60.88.213
e-mail
customer.service@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this manual are property of PegPerego S.p.A. and are protected by the laws in force.
Declaration of conformity
Product name
CULLA GRANDE
Product reference number
IN14*
Reference Standards (origin)
EN 1888-1:2018
EN 1466:2014/AC:2015
EN 71-2:2020
EN 71-3: 2019+A1:2021
Regolamento (CE) N.
1907/2006 – All.
XVII pt. 16,17,43,51,52 (REACH)
UNI ECE R44/04 (EU) (in combination with kit auto)
Declaration of conformity
PegPerego S.p.A. declares under its sole responsibili- ty that the article to
which this declaration relates has undergone internal testing and has been
approved, in accordance with regulations in force, by external, independent
testing laboratories.
Date and place of issue
Arcore, November 2020
PegPerego S.p.A.
via De Gasperi, 50
20862 Arcore (MB), ITALY
PegPerego U.S.A.
Inc. 3625
INDEPENDENCE DRIVE FORT WAYNE INDIANA 46808
phone 260•482•8191 – Call us toll free: 1•800•671•1701
www.pegperego.com
FI002301I323
All of the intellectual property rights for the contents of this instruction
manual belong to PegPerego S.p.A. and are protected by the laws
in
forcewww.pegperego.com
FI002301I323
All of the intellectual property rights for the contents of this instruction
manual belong to PegPerego S.p.A. and are protected by the laws in force
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>