atomi Vanity Mirror Plus Qi Charger and Speaker User Manual

atomi Vanity Mirror Plus Qi Charger and Speaker

Product Information

Vanity Mirror + Qi Charger + Speaker

The Atomi Vanity Mirror + Qi Charger + Speaker is a versatile product that doubles as a vanity mirror and Bluetooth speaker. It is equipped with natural daylight LED lighting that flawlessly magnifies your reflection while streaming your favorite playlist. The product comes with a 9-inch vanity mirror, 15W Qi wireless charger, and 5W Bluetooth speaker. The package also includes a power supply.

Features

• Adjustable for optimal viewing
• 7x Detachable Makeup Mirror
• LED Indicator
• Speaker
• LED Lighting
• Wireless Charging

Specifications

• Bluetooth: 4.1 – 33 . range
• Power Supply Input: 100-240V~50/60Hz 1A Output: 12VDC 3A
• LED Vanity Mirror+Speaker Battery: 3.7VDC 2000mAh 7.4Wh Input:
  DC12V3A USB Output: DC5V2.4A, 12W Wireless Output: 15W

Important Safeguards

Please read all instructions and exercise caution when using this product as the mirror is made of glass. Improper use can result in potential electrical shock or fire hazards.

Product Usage Instructions

• Step 1: Plug in the Vanity Mirror + Qi Charger + Speaker using the power supply provided.
• Step 2: Adjust the mirror to your desired position for optimal viewing.
• Step 3: To turn the LED light on, press and hold the LED light button for 3 seconds. Press again to switch light intensity (3 modes). Press and hold for 3 seconds to turn OFF the light.
• Step 4: To turn the Bluetooth speaker on, press and hold the power button for 3 seconds. The LED indicator will flash blue when the speaker is in pairing mode. When the speaker is successfully paired, the LED indicator will turn solid blue.
• Step 5: To adjust the speaker volume, use the Volume Up and Volume Down buttons.
• Step 6: To answer incoming calls, press the power button once. To refuse incoming calls, press the power button twice. To call the last number, press the power button twice.
• Step 7: To use the wireless charging feature, place your mobile device on the charging pad. The LED indicator will turn blue when your device is charging. When the battery is full, the LED indicator will turn green and automatically turn off after a few seconds.
• Step 8: If you experience any issues with your Vanity Mirror + Qi Charger + Speaker, please contact customer service at 1-800-757-1440 Mon-Fri 9:00 a.m. – 5:00 p.m. EST (US) or email [email protected] before leaving a review.

IMPORTANT SAFEGUARDS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards.
READ ALL INSTRUCTIONS BEFORE USING.

GENERAL
Please exercise caution when in use as the mirror is made of glass

1. Water and Moisture – The unit should not be used near running water or in humid environments. For example, near a bathtub or steaming shower, washbowl, kitchen sink, laundry tub, swimming pool or wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfrere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Never place the mirror in or expose the mirror to direct sunlight. Let unatended, the sun’s rays can reflect to become focused and cause excessive heat and/or fire.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
5. Power Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only with a damp cloth.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
8. Lightning and Power Surge Protection – Unplug the unit from the wall socket during a lightning storm or when it is le unaended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
9. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
10. Periods of Non-Use – If the unit is to be le unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.

SAVE THESE INSTRUCTIONS
Thank you for purchasing the Atomi Vanity Mirror + Qi Charger + Speaker
The Atomi Vanity Mirror + Qi Charger + Speaker doubles as a vanity mirror and Bluetooth™ speaker. Equipped with natural daylight LED lighting, it flawlessly magnifies your reflection while streaming your favorite playlist.

What’s Inside

Bluetooth™ Speaker Specs

• Speaker: 5 Watt hi-fi driver with passive subwoofer
• Bluetooth™: 4.1 – 33 ft. range

Charge Station Specs

Power Supply

• Input:100-240V~50/60Hz 1A Output: 12VDC 3A

LED Vanity Mirror+Speaker

• Battery: 3.7VDC 2000mAh 7.4Wh Input: DC12V3A
• USB Output: DC5V2.4A, 12W Wireless Output: 15W

Features of the Atomi Vanity Mirror + Qi Charger + Speaker

Controls

NOTE:

1. Bluetooth™ speaker will automatically power on anfter 10 minutes of inactivity.
2. When the battery’s voltage is less than 3.1V, the Bluetooth™ speaker will automatically power on.
3. When LED Vanity Mirror + Speaker is plugged into a power source, the speaker will automatically use DC power.

LED Indicator

Power / Bluetooth™ Indicator Light

1. Power: When LED Vanity Mirror + Speaker is plugged  in, the LED indicator will turn red (charging). When the battery is full, the LED indicator will turn on.
2. Bluetooth™: LED indicator flashes blue when the speaker is in pairing mode. When speaker is successfully paired, LED indicator will turn solid blue.

Qi Charging Indicator Light

1. Qi Charging: LED indicator turns blue when your mobile device is charging. When the battery is full, the LED indicator will turn green and automatically turn on after a few seconds.

Bluetooth™ Setup

Any Bluetooth™-enabled device (4.1) can be paired with
the Atomi Vanity Mirror + Qi Charger + Speaker.

1. Press and hold the power button for 3 seconds to turn speaker on. When the Vanity Mirror + Qi Charger + Speaker is turned on, the indicator starts flashing blue. The speaker will then enter into auto-pairing mode and attempt to pair with a nearby Bluetooth™ device
2. Once turned on, the Vanity Mirror + Qi Charger + Speaker should appear on your device’s Bluetooth™ list. If a message such as “Not Paired” or “Not Connected” appears, select “Vanity Speaker Mirror” to connect.
3. Once pairing is successful, you will see a solid (non-flashing) blue light.
4. You may now play music on the LED Vanity Mirror + Speaker through your device. The next time the speaker is powered on, it will automatically link with the last paired Bluetooth™ device. To pair with a new device, follow steps 1-3.

NOTE : A Bluetooth™ device must be within 33 feet LED Vanity Mirror + Speaker to be paired with it.

Charging with the Qi pad

Place your device on the designated charging area of your Vanity Mirror. Charging will begin on contact. The indicator light will turn on blue while the device is charging.

Charging with the USB port

Connect your device to the USB port on the back of the Vanity Mirror + Qi Charger + Speaker using a charging cable (not included).

Light Control

• Press and hold for 3 seconds to turn ON the light.
• Press again to switch light intensity (3 modes).
• Press and hold for 3 seconds to turn OFF the light.

Charging your LED Vanity Mirror + Speaker

When LED light is flashing red, the LED Vanity Mirror + Speaker has 10% battery led and should be connected to the AC adapter. When charging by USB, the mirror must be connected to the power cord to enable USB charging.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment on and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

For questions or concerns, email us at [email protected]
Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.Designed by atomi in New York. Made in ChinaOne-year limited warranty from the date of purchase against defects in material and workmanship

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>