14POINT7 Spartan 3 to Torque Pro for Android User Guide
- June 11, 2024
- 14POINT7
Table of Contents
14POINT7 Spartan 3 to Torque Pro for Android
Product Information
Spartan 3
The Spartan 3 is a device that uses an FTDI serial to USB solution for USB communication. It is designed to work with Android devices that have Torque Pro installed, which is a paid app available on Google Play. The device comes with a Mini USB port and requires a Mini USB to Type C or Micro USB cable depending on the type of connector on your Android device.
Product Usage Instructions
- Ensure that you have Torque Pro installed on your Android device.
- If your Android device has a type c connector, purchase a Mini USB to Type C Cable. If your Android device has a micro usb connector, purchase a Mini USB to Micro USB cable.
- Connect the Spartan 3 device to your Android device using the appropriate cable.
- Launch the Torque Pro app.
- Select the gear icon located in the bottom left corner of the screen.
- Select “Settings”.
- Select “OBD2 Adapter Settings”.
- Select “Connection Type”.
- Select “USB”.
- Go back to the home screen of Torque Pro.
- Select “Realtime Information”.
- Long press on an empty area and select “Add display”.
- Select “Dial (Needle)”.
- Select “14P7 A/F”.
- Select “Medium”.
Introduction
Spartan 3 to Torque Pro for Android
Spartan 3 uses a FTDI serial to USB solution for USB communication, FTDI
solutions are very common and most Android devices have the driver already
installed.
If your Android device has a type c connector, you will need to purchase a
“Mini USB to Type C Cable”. If your Android device has a micro usb
connector, you will need to purchase a “Mini USB to Micro USB cable.
Torque pro is required, the free version of Torque will not work, it is ~$5 USD on Google Play
Settings
Select the gear icon, the bottom left corner Select “Settings” Select “OBD2
Adapter Settings” Select “Connection Type” Select “USB
- Go back to the home screen. Select Realtime Information
- Long press on an empty area. Select Add display
- Select “Dial (Needle)” Select “14P7 A/F” Select “Medium