Tools420 G Pen Micro Plus Owner’s Manual

Tools420 G Pen Micro Plus Owner’s Manual

Instructions For Use

1. Register S/N at bottom of packaging or top of Micro+ Battery at GPEN.COM/REGISTER.

2. Fully charge G Pen Micro+ Battery from USB-C charging port located at bottom of device:

   • Button LED will flash RED while charging
   • Button LED will turn solid GREEN when fully charged
   • Button LED will flash five times when battery is low
   • Button LED will flash RED and GREEN five times when there is a tank connection issue

3. Press button five times to power ON / OFF Micro+ Battery.

4. Press button three times to toggle between heat settings:

   • Blue = Low Heat
   • Green = Medium Heat
   • Red = High Heat

5. Manual Heating: Hold button down to activate manual heating. LED will flash during heat-up and turn solid once the preset temperature is reached.

6. Automatic Heating: Press button twice to activate automatic heating. LED will flash during heat-up and turn solid once preset temperature is reached.

7. Inhale from mouthpiece once the LED turns solid.

8. Once preset temperature is reached, active heating can continue for a maximum duration of 10 seconds before automatically shutting off

9. Device will power off automatically after 5 minutes of inactivity.

10. Cleaning & Maintenance:
    a. The ceramic airpath in the Micro+ Mouthpiece can be separated from the silicone sleeve and cleaned.
    b. To clean and/or replace the Micro+ Tank, twist off mouthpiece assembly from the battery, then twist off Micro+ Tank.

11. HOT SURFACE WARNING: Do not remove tank cover and/or handle Micro+ Tank for five minutes after use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>