Raamdecorati CM-03 Li-Ion Battery Powered Tube Motors User Manual

MANUA L CM-03/05
Li-ion battery powered tube motors
with pull and remote operation

MOTION

CM-03 Li-Ion Battery Powered Tube Motors

MOTION CM-03/05 LI-ION TUBULAR MOTOR
CM-03/05
Li-ion battery powered tube motors with
pull and remote operation

Motor features

| | | |
---|---|---|---|---
Li-ion Battery
Integrated lithium-ion battery| USB Rechargeable
Rechargeable with micro USB| Wireless
Cable free installation| Speed Control
Consistent rolling speed| Bi-directional
Two-way communication for
real-time response

Control options

| | |
---|---|---|---
Pull Control
Operate with pull control| Remote Control
Operate with a remote control| App Control
Operate with the MOTION app| Connectivity
Compatible with home and building
automation

Support

| |
---|---|---
Video
How to install, program and operate
rtube.nl/red980| App Store
Download the MOTION app
rtube.nl/red981| Google Play
Download the MOTION app
rtube.nl/red982

WARNING Read the instructions carefully before assembling and using the product. Assembly can be completed by nonprofessionals. For indoor use only.

• Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of reach of young children.
• Cords may ensnare a child’s neck.
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together.
• Make sure cords do not twist together and form a loop.

Cleaning

Follow these general rules when cleaning the outside of the device and its components:

• Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcohol, or abrasives.

Service & Support

Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

Warranty Service

First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.

Important Safety instructions

WARNING: To reduce the risk of severe injury or death, it is important to follow these instructions for personal safety. Save these instructions.

• Read and follow all installation instructions.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
• Do not allow children to play with fixed controls. Keep remote controls away from children.
• Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
• This instruction manual is also available on the website.
• The drive must be disconnected from its power source during cleaning, maintenance and when replacing parts.
• The A-weighted emission sound pressure level of the drive is equal to or less than 70dB(A).
• Indoor and household use only.
• Disconnect the drive from the power supply or switch off the automatic controls when maintenance, such as window cleaning, is being carried out in the vicinity.
• When operating a biased switch, make sure that other persons are kept away.
• Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity.
• The tube motor must only be supplied with safety extra low voltage corresponding to the marking on the appliance.
• This appliance contains batteries that are nonreplaceable.

Important Installation instructions

WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.

• This motor can only be used with soft material for driven parts.
• Hazardous unprotected moving parts of the drive must be installed higher than 2.5m above the floor or any other level surface that could provide access to it.
• Install the actuating member of a manual release at a height less than 1.8m.
• The actuating member of a biased switch is to be located within direct sight of the driven part but away from moving parts. It is to be installed at a minimum height of 1.5m and not accessible to the public.
• The mass and the dimension of the driven part must be compatible with the rated torque and rated operating time.
• Fixed controls have to be clearly visible after installation.
• The driven part must be compatible with the rated torque (1.1N.m/2.2N.m) and rated operating time (12min).
• Minimum tube diameter: Ø25mm.
• The drive is intended to be installed at a height of at least 2.5m above the floor or any other accessible level surface.
• All-pole disconnection switches must be incorporated in the fixed wiring in accordance with the wiring rules.

FCC Manual
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: ZY4CM03
FCC ID: ZY4CM05
Regulatory Information

1 FCC Information for User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.

2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

3 FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at

|
---|---

6. Pair a remote
Pair a remote control that is able to program blinds. See pages 4 and 5 for remote control details. In this manual, CM-12 is displayed.

6.1 Shortly press the program button on the motor. The blind will start stepping, indicating that program mode has been activated.
(The blind keeps stepping until the program mode is deactivated.)
6.2 Select a desired channel for the blind using the channel selection button on the remote control.
6.3 Press the pair button on the back of the remote control to pair the blind with the selected channel.
The blind will shortly stop stepping, indicating that the remote has been paired to the blind.
Repeat steps 6.1 – 6.3 to remove a blind from a channel.

End limits must be programmed to use a blind properly and to prevent it from being damaged. Proceed to step 12 if end limits are already set.

7. Check rotational direction
WARNING: risk of damage. Stop the blind before reaching the end positions.

8. Set bottom position

10. Set top position

| 10.1 Press and hold the up button until the blind reaches the desired top position.
WARNING: risk of damage.
Slowly approach the top position.
---|---

11.

| 11.1 Simultaneously hold the centre and the down button until the blind stops stepping and starts stepping again.
The top position has been saved.
---|---

12. Set favourite position (optional)

| 12.1 Move the blind to a desired favorite position.
12.2 Hold the centre button to save this Favorite position. The blind shortly stops stepping indicating the favorite position has been saved.
---|---

13. Deactivate program mode

13.1 Shortly press the program button to deactivate program mode. The blind stops stepping and can be operated.
14. Operate the blind

Pull control: pull once to move the blind to the end positions. Pull again to stop the blind.

| Remote control: Choose the channel with which the blind has been paired using the channel button.
Press the up or down button to operate the blind.
Press the centre button to stop the blind.
---|---

15. Move to favourite position

Pull control: Pull and hold to move the blind to the favourite position.

| Remote control: press the centre button to move the blind to the favourite position.
---|---

16. Reset favourite position

| 16.1 Move the blind to a desired favourite position.
16.2 Press the program button on the motor to activate program mode. The blind starts stepping.
16.3 Hold the centre button to save this favourite position. The blind shortly
stops stepping, indicating the favourite position has been saved succesfully.
16.4 Press the program button on the motor to deactivate program mode. The blind stops stepping.
---|---

17. Deactivate direct control
When pressing the up or down button on the remote control, the blind directly moves to its end positions (direct control). To operate the blind with smaller steps using the up and down button, direct control can be deactivated. Now, the blind only directly moves to its end positions when the up or down button is held longer than two seconds.

17.1 Press the program button on the motor to activate program mode. The blind starts stepping.
17.2 Hold the program button until the blind stops stepping (approximately 5 seconds) to deactivate or reactivate direct control.

18 Reset the blind
It is possible to only delete end limits or to do a factory reset.
Factory reset will delete the end limits and remove the connection to any paired remote.

18.1 Press the program button on the motor to activate program mode.
Delete end limits: to delete the end limits of the blind, hold the program button until the blind stops stepping for the first time, and keep holding the button until the blind stops stepping for the second time. (approximately 10 seconds)
Factory reset: to reset the blind to factory defaults hold the button for at least 20 seconds. The blind will stop stepping twice. After the second stop the blind will give one extra step to confirm factory reset.

19. Recharge the battery

Advanced options

20. Manual control
In case there is no remote control or pull control, the blind can be operated with the program button on the motor.

20.1 Hold the program button to manually operate the blind. The blind will move as long as the button is being pressed. (max. 15 sec.)
20.2 To move the blind in opposite direction, release the program button and repeat step 20.1.

21. Single select 5 channel remote
Single select makes it possible to activate program mode on a single blind through a remote control, without having to physically press the program button on the blind.

21.1 To activate Single select, simultaneously hold the centre button and press
the pair button.|
---|---
21.2 The remote starts searching for blinds (search mode).
This is indicated by the LEDs flashing from left to right.|
21.3 Once a blind is found, the channel LED will flash and the blind starts stepping, indicating that program mode has been activated. The blind can now be (un)paired to the remote and/or programmed.|
21.4 To search for the next blind, press the rightbutton. Search mode will be
activated.
To find the previous blind, press the left button.|
21.5 To exit Single select, press the right button during search mode.|

22 Single select 15 channel remote
Single select makes it possible to activate program mode on a single blind through a remote control, without having to physically press the program button on the blind.

22.1 To activate Single select, simultaneously hold the centre button and press the pair button.|
---|---
22.2 The remote starts searching for blinds (search mode). This is indicated by the
horizontal bars on the remote.|
22.3 Once a blind is found, the channel number will flash and the blind starts stepping,
indicating that program mode has been activated. The blind can now be (un)
paired to the remote and/or programmed.|
22.4 To search for the next blind, press the right button. Search mode will be activated.
To find the previous blind, press the left button.|
22.5 To exit Single select, press the right button during search mode.
The display shows the letter O.|

23 Channel select 5 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having to physically press the program button on the motors.

23.1 Select the channel from which the blinds must be copied.|
---|---
23.2 To activate channel select, simultaneously hold the channel selection button and press the pair button.|
23.3 All blinds in the selected channel will start stepping, indicating program mode has been
activated. All blinds can be copied to a new channel on the same remote or a different
remote. Select a new channel on the (new) remote.|
23.4 Press the pair button on the (new) remote to pair the blinds with the new channel.
23.5 To exit channel select, go back to the channel selected at step 23.1 and repeat step 23.2|

24. Channel select 15 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having to physically press the program button on the motors.

24.1 Select the channel you would like to copy.|
---|---
24.2 To activate channel select, simultaneously hold the channel selection button and press the
pair button.|
24.3 All blinds in the selected channel will start stepping, indicating program mode has been activated. All blinds can be copied to a new channel on the same remote or to different
remotes. Select a channel on a (new) remote.|
24.4 Press program button on the (new) remote to pair the blinds with the (new) remote.
24.5 To exit channel select, choose the channel you selected at step 24.1 and repeat step 24.2|

25. Activate / deactivate the motor
To prevent the blind from getting damaged, the motor has a transport mode that makes sure the blind will not be activated before installation.
25.1 Hold the program button and pull twice to activate or deactivate the motor.
The motor can also be activated by charging it with a micro USB cable.

Frequently Asked Questions

step 25.
Motor battery is empty.| Charge the motor. See step 19.
Remote battery is empty. (LEDS of remote are flashing rapidly.)| Replace the battery in the remote. See the manual of the remote.
Remote battery is inserted incorrectly.| Replace the battery in the remote. See the manual of the remote.
Radio-frequency interference| Make sure that the antenna of the motor is out of the way of metal objects.
The distance from the remote to the motor is too far.| Move closer to the motor.
The remote is not connected to the blind.| Pair the remote with the motor. See step 6.
Motor LED flashes red.| The battery of the motor is empty.| Charge the motor. See step 19.
Blind is not charging.| Charger is not plugged in or does not work.| Try a different charger or make sure the charger is plugged in the outlet.
Multiple blinds respond to a remote. (Unable to program a single blind)| Multiple blinds are paired with a single channel.| Pair the blind with a free channel to program or use single select to program the blind.
Blind moves in small steps.| 1)No end limits are programmed.
2)Direct control is deactivated.| 1)Program end limits. See step 8 -11.
2)Activate direct control. See step 17.
Favourite position can not be programmed.| No end limits are programmed.| Program end limits. See step 8 -11.
Blind lowers too far.| End limits are programmed inrorrertly| Reprogram end limits. See step 8 -11.
Blind moves in the opposite direction.| The rotational direction has been set incorrectly.| Change the rotational direction. See step 7.
The blind keeps moving up and down.| e blind is in program mode. The| Press the program button on the motor to exit program mode.

© Copyright

References

• YouTube
• ‎Motionblinds Bridge in de App Store
• Motionblinds Bridge - Apps on Google Play

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>