BARATZA Encore ESP Coffee Grinder User Guide

June 11, 2024
BARATZA

BARATZA logo

BARATZA Encore ESP Coffee Grinder

PARTS IDENTIFICATION

  1. Hopper Lid

  2. Bean Hopper

  3. Grind Setting Indicator

  4. Hopper Gasket

  5. Removable Ring Burr

  6. Grind Settings

  7. Pulse Button

  8. 58mm Adapter Ring*

  9. Dosing Cup*

  10. Dosing Cup Base*

  11. On/Off Knob*

  12. Weighted Base

  13. Grind Adjustment Ring

  14. Grind Adjustment Tab

  15. Burr Lifting Tabs

  16. Quick-Release Knob
    (See manual for instructions)

  17. Center Cone Burr

  18. Brush*

  19. Grounds Bin with Max Fill Line

  20. Shims (See manual for instructions)*

  • included in grounds bin

BARATZA Encore ESP Coffee Grinder 1

Thank you for choosing the Baratza Encore ESP for your grinding needs!
For the full manual, visit baratza.com/documentation

SETUP

  1. Remove the contents from the packaging and hand-wash the hopper lid (1), bea n hopper (2), dosing cup (9), and grounds bin (19) in warm, soapy water. Let ai r dry. Do not wash the ring burr (5) in water or it will rust.
  2. To install the hopper, align the silver grind setting indicator (3) with the  triangle near grind setting 40 (6). Press the hopper down and twist clockwise into place. The grinder will not start without the hopper installed.*
  3. If grinding for espresso, insert the dosing cup base (10) and dosing cup (9). If grinding for filter brewing, insert the grounds bin (19).
  4. To install the on/off knob (11), align it with the stem of the switch on the right side of the unit and press into place. Use either the on/off knob or the pulse button (7) to begin grinding.

*If there is difficulty in installing the hopper: Ensure that the ring burr (5)is fully seated in place. The grind adjustment ring (13) must be rotated fully counterclockwise using the adjustment ring tabs (14) for the hopper to be installed.

When grinding into the grounds bin, coffee tends to mound up. To prevent clogging, empty the grounds before they reach the max fill line.

RECOMMENDED INITIAL GRIND SETTINGS

The Encore ESP has a unique adjustment system for making precise grind adjustments in the espresso range (settings 1-20). In this range, each click of the adjustment will result in a small change to the grind size, making it possible to fine-tune the perfect espresso shot. Grind adjustments in the filter coffee range (settings 21-40) result in relatively large changes, more suitable to other brew methods. Below are suggested starting points for what grind settings to use for common brew methods. Coarser or finer grinding may be needed depending on recipe requirements and taste preference.

Espresso| AeroPress| Hario V60| Automatic Brewer| Chemex| French Press
---|---|---|---|---|---
15| 22| 25| 28| 30| 32

NOTE: The espresso grind setting above is based on a medium roast and a dose of 18g of coffee. For darker roasts or larger doses, set the grind to a higher number. For lighter roasts or smaller doses, set the grind setting to a lower number.

TO GET STARTED

  1. Rotate the hopper so the grind setting indicator (3) is aligned with the desired grind setting (6).
  2. When making grind adjustments, the grinder must either be running or completely empty of beans to prevent damage to the unit.
  3. If grinding for espresso, the included espresso dosing cup (9) and 58mm adapter ring (8) allow for easy transfer of coffee into a 54mm or 58mm portafilter.
  • If using a 54mm portafilter, remove the adapter ring before dosing.
  • Grind into the dosing cup, fit the portafilter upside-down on top, and flip them over to seamlessly pour the grounds into the portafilter basket.

Find step-by-step brew guides with the Encore ESP at the URL on the front page.
It is normal to see the grinder’s grind settings shift after several weeks of usage. To learn more about the effects of burr seasoning on the Encore ESP, visit the URL on the front page.

FOR FURTHER SUPPORT

In US & Canada:
Email: support@baratza.com
Phone: 425-641-1245
Toll Free: 877-701-2021

Outside North America:
For Baratza product related inquiries and support, please visit: baratza.com

If the Grinder Is Not Performing as Expected:
Please see our troubleshooting guides at: baratza.com/troubleshooting

SAFETY INFORMATION

Please read the information below very carefully. It contains important safety information for this appliance. Please keep these instructions for future reference.

  • Use only with AC current and the correct voltage. See the label on the base of the grinder to determine the correct voltage.
  • Only clean the grinder housing with a dry or slightly damp cloth. Do not immerse the grinder, plug or cord in water or any other liquid.
  • Baratza will not accept any liability for damage, injury, or warranty if the grinder is used other than for its intended purpose (i.e. grinding roasted whole coffee beans) or is improperly operated or repaired.
  • Do not operate the grinder with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Keep the appliance and its cord out of reach of children aged less than 8 years.
  • Do not leave your grinder unattended whileturned ON.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • Always unplug the grinder from the electrical supply before assembling, disassembling or cleaning. To unplug, grasp plug and remove from the outlet. Never pull on the cord.
  • CAUTION: ALWAYS unplug the electrical supply cord prior to cleaning the grinder.

BARATZA Encore ESP Coffee Grinder 2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals