HOMCOM 839-267 TV Stand Cabinet Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM 839-267 TV Stand Cabinet
USING CAM LOCK AND QUICKFIT
QUICKFIT: Tighten quickfit until shoulder is flush with panel.Do not
overtighten or undertighten.
CAM LOCK: When fitting cam lock, ensure starting position is correct
before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are
joined.
Cam lock should be inserted before quickfit
Turn cam lock clockwise to tighten.
lt may be necessary to adjust the hinges so that the doors align.Use the instructions below as a guide.
To adjust the door vertically loosen the screw asshown and move up and down as
needed.
To adjust the gap from the door to the main frame turn the screw clockwise or
anti-clockwise as needed.
To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
Please fix other screws
EXPLOSION FIGURE
PARTS
HARDWARE
ASSEMBLY INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>