QZYL LED Strip 100FT 5050 LED Strip Lights User Manual
- June 11, 2024
- QZYL
Table of Contents
5050 LED STRIP LIGHTS
Model NO: LED Strip 100FT
User Manual
Product Parameters
- Model NO: LED Strip 100FT
- LED Type: 5050 RGB
- Output Power: 34W
- Input Voltage of Adapter: AC 85V-265V
- Output Voltage of Adapter: DC 12V
- Remote Distance: within 5M
- Working Temperature: -20C ~+45C
- Beam Angle: 120
Controller Mode
| Press this key to switch static colors. There are 20 kinds of colors for
chosen.
---|---
| In any state, long press this key can turn on/off the strip lights. In
static color mode, short press this key can adjust the brightness. There are
10 levels for chosen. In dynamic mode, short press this key to increase+ or
reduce- the color changing speed. There are 10 levels for chosen.
| Press this key to switch color changing modes. There are 21 different modes
for chosen.
APP Mode
This APP program requires that the minimum systems of your phones is Andriod 4.3 or iOS 8.0. No limit for mobile phone configuration. You can download APP by scanning QR codes on iOS or Android systems. Use Apps with scanning function such as browser to scan the QR code.
http://download.appglobalmarket.com/happylightingdownload.html
Please open the strip lights control APP on your phone, by which you can connect one or more LED strip through Bluetooth and able to set and control multiple LED strip.
Functions are listed as follows
- Adjust the brightness and color temperature of 60,000 kinds of colors for both colorful LED strips and monochrome LED strip;
- There are 28 style modes, that keep the one solid color or make color change automatically and would keep changing even the phone is disconnected with the strip lights.
- In the music mode, the colors of strip lights change automatically according with the music rhythm, which is absolutely beautiful.
- If the phone system is Android, this app will automatically sync the songs that have been downloaded in your mobile phone.
- If the phone system is iOS, you need to connect your mobile phone to the computer and import the songs from the computer to your mobile phone. Then the app will automatically syncs the songs you have imported. 4. In the Mic mode, colors adjusting automatically based on the ambient sound, the phone Mic or external Mic can be chosen. 5. Be your light “Alarm clock”, the LED strip lights have timing function. You can preset the time to turn on/off your LED strips. Then it turns on or off automatically on time every day. 6. Long distance control without direction restriction and multiple controls is allowed. 7. LED strip lights have memory function. When the strips are used again, they remember the last mode settings without having to repeat the settings. 8. Easy to install, just clean the adhesive surface and paste, no extra steps. 9. Once been connected, your phone would connect to the light strips automatically after you turn on your bluetooth.
HAPPYLIGHTING APP
When your device can’t connect the lights automatically, follow the steps
below: .
Android «««««««««««««««
Method 1: Click ‘My Devices’ to refresh (on the top left corner), then it
shows ‘connected successfully’.
Method 2: If the first step fails, you need to exit the App and close its
‘process’ in the background completely, then open again.
Method 3: If the all steps fail, you need to exit the App and close its
‘process’ in the background completely, turn off the bluetooth, then turn on
the bluetooth, and open the App again. IOS««««««««««««««
Method 1: Exit the App, close its ‘process’ in the background, and then
open the App again.
Common Troubleshooting
-
The controller was connected the power, but not light up
1. Check the input power supply: please use the power adapter that we equipped or other adapters with the same specification as ours. The input voltage must meet the voltage requirments of the strip lights. When the input voltage is lower than requirement, the strip lights will not be turn on, while higher voltage may damage the circuit. The output power of the adapter (KW value) must equals to, or higher than the power of the LED strip lights.
2. Check whether the connector is connected correctly with the strip lights. Make sure each interface is connected correctly
3. Check whether the remote control is open. -
If the LED strip lights are able to light up, but the remote control does not work or can’t control LED light.
1. Check whether the insulation sheet is removed from the remote control
2. Make sure the battery on the remote control is installed correctly
3. Ensure that the remote is working within 5 meters and aligned to the infrared receiver of the controller.
4. Try to replace the battery.
Attentions
- Light strip must be used under 12V.
- Remote control must be aligned to the Infrared Receiver of the controller.
- The led strip lights must be connected correctly based on installation guide.
- Make sure the surface you are going to paste strip is clean and dry.
How to Correctly Connect the LED Strip Lights?
Instructions
- Wipe the surface of the object clean, and keep the surface clean and dry;
- Remove the red film of the lamp strip;
- Press the lamp strip on the object with your hand to make the lamp strip and the object closely close together.
WARNING
- DO NOT IMMERSE IN FIRE
- CHILDREN UNDER THE AGEOF 16 SHOULDUSE THIS PRODUCT UNDER ADULT SUPERVISION.
If you have any question after receiving the products, please contact our customer service, we will reply to you within 24 hours.