MARLEY EMJH143 Positive Vibration Frequency Earbuds User Guide

: June 11, 2024
: MARLEY

Table of Contents

MARLEY EMJH143 Positive Vibration Frequency Earbuds
Product Information
Product Usage Instructions
Inside the Box
Components + Charging
FCC
BATTERY REPLACEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARLEY EMJH143 Positive Vibration Frequency Earbuds

MARLEY-EMJH143-Positive-Vibration-Frequency-Earbuds-
PRODUCT

Product Information

Positive Vibration Frequency Headphones

The Positive Vibration Frequency headphones come with a charging cable (USB-C to USB-A), a quick start guide, and warranty information. The components can be charged using the provided cable. The headphones have a volume control, power on/off button, play/pause button, and phone call function. The earcups are removable, and the headband is adjustable. The LED indicator shows the status of the device, such as power on/off and device pairing. The headphones can be paired with a device using Bluetooth technology. The headphones comply with FCC radiation exposure limits and Part 15 of the FCC Rules.

Product Usage Instructions

To turn on/off the headphones, press and hold the power button for 4 seconds.
To pair the device with your headphones, press and hold the power button for 6 seconds until the LED indicator blinks fast.
Then, enable Bluetooth on your device and select “Positive Vibration Frequency” from the list of available devices.
To control music playback, use the play/pause button to start or stop music and skip tracks using the volume control buttons.
To answer or end phone calls, press the play/pause button once. To reject an incoming call, press and hold the play/pause button for 2 seconds.
To adjust the headband size, slide the earcups up or down along the metal band until you find a comfortable fit.
To charge the headphones, connect the charging cable to the USB-C port on the headphones and plug the USB-A end into a power source. The LED indicator will show a slow flash while charging and turn off when fully charged.
For charging in Australia and New Zealand, use an approved detachable power supply unit with an output rating of 5V DC, 500 mA.
Dispose of batteries at designated collection points to prevent environmental and health hazards.

Inside the Box

MARLEY-EMJH143-Positive-Vibration-Frequency-Earbuds-FIG
1

A. Headphones
B. Charging Cable USB-C to USB-A
C. Quick Start Guide
D. Warranty Information

Components + Charging

MARLEY-EMJH143-Positive-Vibration-Frequency-
Earbuds-FIG 3

A. Volume Up/Track Forward
B. Power On/Power Off +Play/Pause + Make/End Phone Calls
C. Volume Down/Track Backward
D. Removable Earcups
E. Headband Adjustment
F. LED Indicator
G. USB-C Charging Port

Status

Low Power
Charging
Pairing Mode
Bluetooth® Reconnect
Bluetooth® Connected
Phone Call

LED Indication

Blinking
On
Fast Blinking
Slow Flash
Slow Flash
Fast Blinking

Power On/Off

Pair New Device

Pair Device

Music Control

Make/End Phone Calls
Accept/Reject Phone Calls

Full instruction and warranty details can be found at https://www.thehouseofmarley.com/customer-support/instruction-books

POSITIVE VIBRATION FREQUENCY

FCC

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING:
For Australia and New Zealand for charging this equipment, only use Australian approved detachable power supply unit with the output ratings of 5V DC, 500 mA.

FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISEDC STATEMENT: This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

ISEDC RF EXPOSURE STATEMENT:
The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
End user must follow the specific operating instructions for satisfying RF exposure compliance.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).

BATTERY REPLACEMENT

BATTERY REPLACEMENT STATEMENT IN EUROPE
Your Positive Vibration Frequency includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations who will supply details of the warranty and out-of-warranty replacement battery service.

CAUTION
Risk of explosion if the battery is replaced by an incorrect type

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.

WEEE EXPLANATION
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Hereby, FKA Brands Ltd, declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/declaration-of- conformit

To prevent possible hearing damage, do not listen at high volume levels for long periods. Full instruction and warranty details can be found at http://www.thehouseofmarley.com/instructionbooks.

Marley and the Marley logo are registered trademarks of Fifty-Six Hope Road Music Limited and the use of such marks by House of Marley is under license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by The House of Marley is under license.