DAKOTA 211-8684 3-Shelf Barnwood Pipe Bookshelf Instruction Manual
- June 11, 2024
- DAKOTA
Table of Contents
DAKOTA 211-8684 3-Shelf Barnwood Pipe Bookshelf
Thank you for your purchase of our product. The following contains assembly instructions as well as care and maintenance suggestions. Please take a moment to completely read and familiarize yourself with this information. If you have any questions regarding your purchase, please contact us at 1-800-495-9278.
- KEEP AWAY FROM CHILDREN: Never allow children in a work area. Do not allow children to handle this product and any tools or equipment.
- WEIGHT CAPACITY: 90 lbs weight capacity with minimum two (2) metal shelf frames on evenly distributed loads. Must be assembled using cross braces and included hardware.
- IMPORTANT: Metal Shelf Kit must be secured to the wall using the included safety bracket and hardware.
- USE OF PRODUCT : Never use inappropriate attachments or manipulate shelf beyond manufactured capabilities. Inappropriate use or manipulation can cause serious injury and will void any and all warranties.
- MAINTAIN WITH CARE: Always keep shelf clean and properly assembled for safe and proper performance. Do not expose to corrosive materials.
IMPORTANT!
CONTACT CUSTOMER SERVICE BEFORE RETURNING TO STORE
- HAVING PROBLEMS?
- INSTALLATION QUESTIONS?
- NEED PARTS?
- TROUBLESHOOTING?
CONTACT US FIRST : Customer Service 1-800-495-9278 M-F: 8:00 am – 8:00 pm CT/ S-S: 10:00 am – 5:00 pm
Parts List
Assembly
Step 1
- Connect the two (2) Frames (A) using two (2) Cross Braces (B), four (4) M6X35MM Allen Bolts (C) and four (4) M6 nuts (E). See Figure A.
- Connect the two Cross Braces (B) together using one (1) M6X12MM Allen Bolt (D) and one (1) M6 nuts (E). See Figure B.
- Screw in the four (4) M6 Shelf Feet (G) to the bottom of the two (2) frames (A). See Figure C.
- Frame should look like Figure D. Tighten all hardware.
Step 2
Using the six (6) Pipe Straps (H), twelve (12) M5x12MM Shelf Screws (F), and 1/16″ drill bit (not included) attach the shelf (not included) to the center of the Pipe Shelf Frames. Take special care not to drill/screw through shelf top.
Step 3
IMPORTANT : Using the two (2) Safety Brackets (I) secure the Pipe Shelf Frame to the wall.
- Mount using two (2) M5X35MM Screws (J), two Wall Anchors (K) and 1/4″ drill (not included).
- Mount using two (2) M5X35MM Screws (J) and 1/16″ drill (not included).
- Use concrete/block/brick anchors (not included).
90 LBS
MAXIMUM WEIGHT CAPACITY
Customer Service 2301 Traffic St NE Minneapolis, MN 55413
1-800-495-9278