NINJA JC150 Series Nabo Neverclog Cold Press Juicer Instructions

NINJA JC150 Series Nabo Neverclog Cold Press Juicer

Product Information: NEVERCLOGTM COLD PRESS JUICER JC150 Series

The NEVERCLOGTM COLD PRESS JUICER JC150 Series is an electrical appliance designed for indoor and household use only. It is equipped with electrical connections and moving parts that potentially present a risk to the user. The appliance comes with  attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja may cause fire, electric shock, or injury. The rotating sieve is a crucial component of the juicer and should not be damaged. The motor base and control panel should not be submerged in water or other liquids.

Product Usage Instructions

1. Read and review instructions for operation and use before using the appliance and its accessories.
2. Carefully observe and follow all warnings and instructions.
3. Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
4. Always make sure pulp spout is securely in place before motor is turned on. DO NOT unfasten parts while juicer is in operation.
5. Be sure to turn the appliance off after each use. Make sure the motor stops completely before disassembling.
6. Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before moving, cleaning, or disassembling.
7. DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.
8. DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
9. ALWAYS use the appliance on a dry and level surface.
10. DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
11. This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
12. DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use the tamper or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
13. Keep hands, hair, and clothing out of the container when loading and operating.
14. During operation and handling of the appliance, avoid contact with moving parts.
15. DO NOT use the appliance if the rotating sieve is damaged.
16. DO NOT operate the appliance without the pulp container in place.
17. DO NOT microwave container or accessories provided with the appliance.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USE
FOR HOUSEHOLD USE ONLY

death, or substantial property damage if the warning included with this symbol is ignored.
****| For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:

WARNING
To reduce the risk of injury, fire, electrical shock, or property damage, basic safety precautions must always be followed, including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.

1. Read all instructions prior to using the appliance and its accessories.

2. Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

3. DO NOT submerge the motor base or control panel in water or other liquids.

4. DO NOT spray motor base or control panel with any liquid. Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.

5. Always make sure pulp spout is securely in place before motor is turned on. DO NOT unfasten parts while juicer is in operation.

6. Be sure to turn the appliance off after each use. Make sure the motor stops completely before disassembling.

7. Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before  assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.

8. Before use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.

9. Before each use, inspect auger for damage. If auger is bent or damage is suspected, contact
   SharkNinja to arrange for replacement.

10. DO NOT use this appliance outdoors. It is designed for indoor household use only.

11. This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.

12. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.

13. This appliance has important markings on the plug blade. The entire supply cord is not suitable for replacement. If damaged, please contact SharkNinja for service.

14. Extension cords should NOT be used with this appliance.

15. To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.

16. DO NOT allow the cord to hang over the edges of tables or counters. The cord may become
    snagged and pull the appliance off the work surface.

17. DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.

18. ALWAYS use the appliance on a dry and level surface.

19. DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
    any appliance is used near children.

20. This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

21. ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja may cause fire, electric shock, or injury.

22. DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use the tamper or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.

23. Keep hands, hair, and clothing out of the container when loading and operating.

24. During operation and handling of the appliance, avoid contact with moving parts.

25. DO NOT use the appliance if the rotating sieve is damaged.

26. DO NOT operate the appliance without the pulp container in place.

27. DO NOT microwave container or accessories provided with the appliance.

28. NEVER leave the appliance unattended while in use.

29. DO NOT juice hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.

30. NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure attachments are properly installed before operation.

31. Before operation, ensure all utensils are removed from container. Failure to remove utensils can cause container to shatter and potentially result in personal injury and property damage.

32. DO NOT attempt to remove the feed chute chamber from the motor base while the auger is still spinning. Allow the appliance to come to a complete stop before removing attachments.

33. If the appliance is overloaded, the unit will temporarily disable the motor. Wait approximately 2 minutes before using again.

34. 34 DO NOT juice hot ingredients.

35. Remove the seeds and pits from fruits such as mangoes or plums, as well as peels and tough skins from fruits such as oranges, lemons, and limes, as they could damage the unit.

36. DO NOT add water to the feed chute while the unit is operating to clean the unit. 37 DO NOT submerge the motor base or control panel in water or other liquids. 38 DO NOT spray motor base or control panel with any liquid.  DO NOT attempt to sharpen auger.

37. Turn off the appliance and unplug the motor base before cleaning.

38. DO NOT add frozen fruit, frozen vegetables, or ice to the juicer.

39. Consumers with sensitivity to pulp may wish to strain their juice as a precaution.

SAVE THESE INSTRUCTIONS

PARTS

• A Tamper
• B Food Tray
• C Feed Chute Chamber with Anti-Drip Lever
• D Pulp Spout
• E Auger
• F Black Filter (less pulp)
• G Orange Filter (lots of pulp)
• H Motor Base (power cord not shown)
• I Juice Jug
• J Pulp Container

BEFORE FIRST USE

IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.

NOTE: All attachments are BPA free and dishwasher safe.

1. Remove all packaging materials from the unit.
2. Wash parts in warm, soapy water, then thoroughly rinse and air-dry all parts.
3. Wipe control panel with a soft cloth. Allow it to dry completely before using.

ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjaaccessories.com.

FEATURES

USING THE CONTROL PANEL

• START/STOP
  Press once to start continuous running up to 12 minutes; press again to stop.

• REVERSE
  If the feed chute chamber becomes blocked or ingredients are not processing, press and hold REVERSE. There will be a beep and a brief pause, then the auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed. Press START/STOP to resume normal operation.

USING THE FILTERS FOR PULP CONTROL
Control the amount of pulp by choosing the appropriate filter.

NOTE: For best results, we recommend using the Orange (Lots of Pulp) filter when processing soft fibrous fruits like pears, berries, seeded melons, and pineapple. TE: For best results, we recommend using the Orange (Lots of Pulp) filter when processing soft fibrous fruits like pears, berries, seeded melons, and pineapple.

To watch videos on how to use and clean the Ninja NeverClog™ Cold Press Juicer, scan the QR code.

USING THE JUICER

IMPORTANT:

• Review all warnings before proceeding.
• DO NOT add frozen fruits and vegetables or ice to the unit.

NOTE: If the feed chute chamber becomes blocked or ingredients are not processing, press and hold REVERSE. There will be a beep and a brief pause, then the auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed. Press START/STOP to resume normal operation.

1. Plug in motor base and place on a clean, dry, level surface such as a countertop or table.

2. Insert the auger into the feed chute chamber, then attach  the desired filter onto the auger, with the metal portion of the filter on the bottom of the auger. The filter will sit loosely around the auger.

3. Attach the pulp spout to the feed chute chamber by installing at an angle on top of the filter, then turning counterclockwise to lock in place.
   

4. Install the assembled feed chute chamber on the motor base at an angle, then turn counterclockwise until it clicks into place.

5. Install the food tray on the top of the feed chute chamber.
   

6. Place the pulp container under the pulp spout, then place the juice jug under the anti-drip lever on the feed chute chamber.
   

7. Select START/STOP, then gradually add ingredients to the feed chute. For best results, allow juicer to process each ingredient before adding more. Use the tamper to push ingredients down through the feed chute, as needed.

8. When juicing is complete, select START/STOP, then close the anti-drip lever. Stir juice and serve.

9.  To disassemble, press and hold the RELEASE button while turning the feed chute chamber clockwise and removing it from motor base.

10. Remove the pulp spout from the feed chute chamber by turning clockwise. Remove the filter and auger by gently pulling them out of the feed chute chamber.

11. Unplug the unit when finished. If moving the unit, grab from the bottom of the base. Refer to the Care & Maintenance section for cleaning and storage instructions.
    

CARE & MAINTENANCE

IMPORTANT: DO NOT attempt to clean the unit by adding water to the feed chute chamber while attached to the motor base.

CLEANING

• Hand-Washing
  Separate all parts and wash in warm, soapy water with a soft cloth. Thoroughly rinse and air-dry all parts.

• Dishwasher
  All parts, except the motor base, are top-rack dishwasher safe and should NOT be cleaned with a heated dry cycle.

• Motor Base
  Unplug the motor base before cleaning. Wipe with a clean, damp cloth.

• Filters
  If there is pulp build up on the metal portion of the filter, use a cleaning utensil or toothpick to remove the excess before washing.

STORING
For cord storage, wrap cord with hook-and-loop fastener near the back of the motor base.
DO NOT wrap the cord around the bottom of the base for storage.
When moving the unit, lift from the bottom of the motor base. Store the auger and filter assembled in the feed chute chamber with the pulp spout installed. Place the juice jug into the pulp container for easy storage.

OVERLOADING THE UNIT
This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload the motor. If the unit is overloaded, the motor will be temporarily disabled. Should this occur, wait 2 minutes, then press START/STOP to start the unit.
If your unit needs servicing, please call Customer Service at 1-877-646-5288. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting.

The REVERSE program is not operating.

• After pressing and holding REVERSE, there will be a beep and a brief pause, then the auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed. Press START/STOP to resume normal operation.

The unit stopped working and is beeping.

• The unit was overloaded with ingredients. Wait 2 minutes then press START/STOP to start the unit.

Can I juice fruit with seeds and pits in it?

•  No. Seeds and pits should be removed from the fruit prior to juicing. For example, remove the seeds from cherries and the pit from a plum.

Can I juice frozen fruits and vegetables or add ice?

• No, do not use frozen fruit, frozen vegetables, or ice with this unit.
  The unit makes a squeaking noise when I juice certain ingredients.

• When the auger is breaking down fibrous ingredients like apples, celery, herbs, and leafy greens, the unit will sometimes make this noise. This is normal and not a cause for concern.

The unit is producing less juice than I anticipated based on the amount of produce I used.

• With the Ninja NeverClog™ Cold Press Juicer, you can expect 1 lb. of produce to yield approximately
  8 oz. of juice.

•  Depending on the seasonality of ingredients, you may experience lower juice and pulp yield when using the Less Pulp Filter. If this occurs, try using the Lots of Pulp Filter.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourninja.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

REGISTER YOUR PURCHASE

• registeryourninja.com
• Scan QR code using mobile device

RECORD THIS INFORMATION

• Model Number:
• Serial Number:
• Date of Purchase: (Keep receipt)
• Store of Purchase:

TECHNICAL SPECIFICATIONS

• Voltage: 120V~, 60Hz
• Power: 150 Watts

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
NINJA is a registered trademark of SharkNinja Operating LLC.
NEVERCLOG and NINJA NEVERCLOG are trademarks of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
© 2023 SharkNinja Operating LLC
JC150Series_IB_NevClog_E_F_S_MP_Mv5

ninjakitchen.com

References

• Sharkninja Home
• Sign In

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>