HQST HCPHCCBT Bluetooth Module User Manual
- June 11, 2024
- HQST
Table of Contents
Bluetooth Module
BM
Manual
HCPHCCBT Bluetooth Module
This user manual offers a brief walkthrough of its features and how to use it.
Please keep the user manual in hand for future reference.
Still need help? Feel free to send us an email at
sales@myhqsolar.com
FEATURES
- Through this module, it is possible for the mobile phone to communicate with the controller
- Expand the controller usage scenario
COMPATIBILITY
- Works with HQST MPPT Charge Controllers Series with an RS485 communication port: HCC-20MPPTN, HCC-40MPPTN, HCC60HTR.
- If you’re not sure about the compatibility of your controller, please feel free to contact the seller directly or send us an email at sales@myhqsolar.com
PRODUCT CONNECTION PORT
RS485 PIN
PIN-1| PIN2| PIN3| PIN4| PIN5| PIN6
VDD| VDD| GND| GND| D-| D+
VDD = 3.3V D- == B D+ == A
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>