evolur 610 AI Raleigh Basic Glider Owner’s Manual
- June 11, 2024
- evolur
Table of Contents
RALEIGH BASIC GLIDER
Owner’s Manual
610 AI Raleigh Basic Glider
Scan the QR code to register your product https://www.evolurbaby.com
/customer-care/product-registration/
Read all instructions before assembling and using product.
IMPORTANT – Keep Instructions for future use.
THANK YOU…
…. for choosing Evolur and congratulations on joining our family; a family
that has been transforming lives for over 30 years! We appreciate your
feedback and wish you the very best in the coming years with your new
addition. If you have any questions or concerns please don’t hesitate to reach
out to us. One of our trusted Customer Care representatives will be happy to
assist you.
Thank you again for entrusting us to provide you with safe and affordable baby
products and accessories.
LIMITED WARRANTY:
- Evolur warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
- This warranty covers 1 year from the date of original purchase.
- This warranty is valid only upon presentation of proof of purchase.
- This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
- This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
- This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
WARNINGS
- FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
- CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS, OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
- DO NOT USE THIS GLIDER IF ANY PARTS ARE MISSING, DAMAGED, OR BROKEN.
- CONTACT DREAM ON ME 145 VERONICA AVENUE, SOMERSET, NEW JERSEY 08873 FOR REPLACEMENT PARTS.
- DO NOT ALLOW CHILDREN TO PLAY OR USE THIS GLIDER UNSUPERVISED.
- DUE TO THE RISK OF INJURY, MAKE SURE THAT THERE IS NOTHING UNDERNEATH THE FOOTREST WHEN IT IS RETURNED TO THE CLOSED POSITION.
- WHEN NOT IN USE, LEAVE THE CHAIR IN AN UPRIGHT AND CLOSED POSITION.
- KEEP HANDS AND FEET CLEAR OF THE MECHANISM AND ONLY THE OCCUPANT SHOULD OPERATE THE MECHANISM TO AVOID INJURY.
- MAXIMUM LOAD: 108 KGS/240 LBS. EXCEEDING THIS WEIGHT MAY DAMAGE THE PRODUCT AND CAUSE POTENTIAL INJURY.
- CHECK CONNECTING POINTS PERIODICALLY TO ENSURE NONE HAVE COME LOOSE DURING USE.
- DO NOT USE THE GLIDER IF NOT ASSEMBLED PROPERLY.
**PARTS
**
If there are any missing parts, please contact Evolur before using the
product.
GLIDER ASSEMBLY – BASE SETUP
1a. Assemble and use the glider on a soft, level surface.
1b. As shown in the illustration, carefully cut the straps wrapped around the
metal swivel underneath the Glider (1). Scissors (NOT INCLUDED)
GLIDER ASSEMBLY – BACK SEAT SETUP
2a. Align the Metal Channel on the Back Rest (2) to the Metal Prongs on the
seat.
2b. Slide the metal channel into the metal prongs on the seat frame.
2c. Please ensure that the back metal channel goes into the base metal prongs
until it clicks and locks itself.
2d. After clicking the back into position, pull it upward to ensure that it is
fully secured and then use the recliner.
DIRECTIONS TO USE – ACCESS TO FOOTREST AND RECLINE
3a. Using the lever, you can lift the footrest to relax comfortably.
WARNING:
- Make sure the glider’s back is securely attached to the seat.
- Improper installation may result in injuries due to fall hazards from a loose back.
FURNITURE CARE INSTRUCTIONS
- PROTECT GLIDER SURFACES FROM HOT OR EXTREMELY COLD ITEMS.
- PROTECT THE FABRIC SURFACES OF THE GLIDER FROM PENS, MARKERS, AND CRAYONS.
- OILS FROM POTPOURRI AND OTHER SCENTED ITEMS CAN STAIN AND DAMAGE THE FABRIC OF THE GLIDER.
- DO NOT DRAG ITEMS ACROSS THE SURFACE OF THE GLIDER.
- CLEAN USING ONLY MILD, WATER-FREE CLEANING SOLVENTS. NEVER USE WATER. TAP WATER CONTAINS MINERALS THAT MAY CAUSE RINGS OR FADING.
- DO NOT USE BLEACH TO CLEAN THE GLIDER. DO NOT DRY CLEAN INDIVIDUAL PARTS.
- DO NOT SCRATCH OR CHIP THE FINISH.
- INSPECT THE PRODUCT PERIODICALLY, AND CONTACT DREAM ON ME FOR REPLACEMENT PARTS OR QUESTIONS.
- DO NOT STORE THE PRODUCT OR ANY PARTS IN EXTREME TEMPERATURES AND CONDITIONS SUCH AS A HOT ATTIC OR A DAMP, COLD BASEMENT. THESE EXTREMES CAN CAUSE A LOSS OF STRUCTURAL INTEGRITY.
- DO NOT SPRAY CLEANERS DIRECTLY ONTO FURNITURE.
- LIFT SLIGHTLY WHEN MOVING ON CARPETING TO PREVENT SWIVEL BREAKAGE.
YOU DID IT!
Congratulations !
It’s time to pamper yourself. A safe, elegant glider designed to provide full
comfort to your body.
45 VERONICA AVENUE………………… 5375 BOUL DES GRANDES-PRAIRIES
SOMERSET NEW JERSEY 08873………………. SAINT-LEONARD, QC H1R 1B1
E-mail: info@evolurbaby.com
www.evolurbaby.com
Follow Us On
@Evolurbaby
@evolurbaby
to get your nursery featured on our social media.
Enter our monthly giveaway!
Scan the QR code to register.| Chat with us!
Scan the QR code to Live Chat.
---|---
| 
https://qr.tapnscan.me/DW0X42| https://qrcodes.pro/k5dwNw
References
- Evolur Baby Furniture - Convertible Crib, Double Dresser, High Chair, Bassinet, Stroller & More
- Customer Care | évolur contacts and help - Evolur
- Product Recall Registration | Evolur
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>