2AD2WHPISPPAN Sprocket Panorama Printer User Guide
- June 11, 2024
- HP
Table of Contents
Turn moments into memories with the HP Sprocket Panorama Printer
HP Sprocket Panorama Printer
Parts and Controls
Supplied Items
Product Overview
Power Button
How to Reset your HP Sprocket Panorama printer
Caring for your HP Sprocket Panorama printer
Lighting and Troubleshooting
Status LED Indicator Light
Troubleshooting
Getting Started
Installing Mobile App
Loading Paper
Charging Battery and Power On/Off
Pairing a Mobile Device and the HP Sprocket Panorama printer
Specifications
Technical Information
The information contained herein is subject to change without notice.
© Copyright 2022 HP Development Company, L.P.
Parts and Controls
Supplied Items
HP Sprocket Panorama Printer
Setup Instructions
HP Sprocket Panorama Printer 3.5 x 1.0 – 9.0″ (8.9 x 2.5 – 22.5cm) Photo Paper
(1 roll included)
USB-C Charging Cable
Regulatory Information
Product Overview
- Power Button
- USB Charging Port
- Paper Cover
- Paper Output Slot
How to Reset your HP Sprocket Panorama Printer
There are two ways you might need to reset your Sprocket printer:
Hardware Reset
If the printer isn’t responding or won’t connect to your mobile device, try
performing a hardware reset. Remove the Paper Cover and press and hold the
small round button near the Paper Tray until the printer turns off. The printer
will automatically restart.
When you complete a hardware reset, your personalized settings will be saved
(Custom Name, Personal Color, etc.).![2AD2WHPISPPAN Sprocket Panorama Printer
-
fig 1](https://manuals.plus/wp-content/uploads/2023/05/2AD2WHPISPPAN- Sprocket-Panorama-Printer-fig-1.jpg) Factory Reset
Perform a factory reset to return to the default settings if you want to gift your Sprocket to someone else. A factory reset might also be used if Privacy is turned on for your mobile device and the device is lost. Completing a factory reset would allow a new phone to connect. Before completing a factory reset, update your printer firmware.
You can initiate a factory reset by using the steps below. A factory reset can only be completed when the USB charging cable is NOT connected to the printer.-
Hold the power button for about 7 seconds. After 3 seconds, the Status LED light will turn off to indicate the printer is shutting down; continue to hold the Power button until the LED lights start to flash.
-
Release the power button. The LEDs will continue blinking for about 6 seconds.
-
While the LEDs are blinking, press and release the power button. The device will remain off until you power on again.
Power on; the printer will be reset to factory settings. After a factory reset, all settings are reset to factory defaults (Custom Name, LED color, Sleep Time, Auto-Off, etc.). -
If you decide you do NOT want to reset the printer to factory defaults, you can abandon the reset. While the LEDs are blinking, do not press the Power button as directed in step three above. This will cancel the factory reset.
-
Note: If you want to pair again with your device after a Factory Reset, make sure to also “forget” your device in your operating system’s Paired Devices list. Then, re-pair in the Sprocket app.
Caring for your HP Sprocket Panorama Printer
-
Remove fingerprints, dust, and dirt from the printer using a dry microfiber cloth.
-
Keep the Paper Cover closed to prevent dust and debris from entering the paper path.
-
Update the printer firmware. Make sure your mobile device is connected to the Internet and then open the Sprocket app. Turn on the printer and connect it to the Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update. Your printer must be
charged to 25% or higher before a firmware update. -
Keep your Sprocket app updated. If you don’t have your mobile app set to automatically update, go to the appropriate app store and make sure the latest version is installed.
Lighting and Troubleshooting
Status LED Indicator Light
The color of the Status LED Indicator Light can be personalized in the
Sprocket app. The default color is Light blue, indicated in this table.
Color/Status | HP Sprocket Condition | Description |
---|---|---|
Off | Powered off/Steep | Device is turned off, in Sleep mode, the lid is off, |
or the battery is completely drained. If the battery is Critically Low or
drained, you cannot print.
Light blue (default) (Or owner’s personal color)| Idle| Printer is idle. The
color of this LED can be personalized in the Sprocket app.
Light blue (default), Blinking
(Or owner’s personal color)| Sprocket is printing from the Owner’s mobile
device| The LED will quickly flash light blue/personal color three times when
a print job is sent from an Owner’s mobile device. While printing, the LED
will slowly pulse white/ personal color.
Personal or Assigned Guest Color
(Yellow, Blue, Green, Purple, Pink. Color set in the Sprocket app)| Sprocket
is printing from a Guest mobile device| The LED will quickly flash the
owner/guest’s color three times when a print job is sent by a particular user.
While printing, the LED will slowly pulse the owner/guest’s color.
Owner/Guest color, Blinking slowly or solid .| Sprocket is overheated ,| The
printer will pause printing until temperature returns to normal and resume
automatically.
Red, Blinking slowly| Printer Error State| Printer might be out of paper.
Check the Charge LED light for power bank status. Resolve the error to
continue printing.
Solid Red| Printer Error State| The battery is low. Charge the printer.
Red, Blinking fast| Printer Error State| The printer might have a paper jam or
is in an unrecoverable state. Complete a hardware reset to resolve.
Alternating colors, Sparkling| Firmware Update| Printer firmware updating.
Make sure not to close the Sprocket app or unplug from power during the
update.
Charge LED Indicator Light
Charge LED: USB cable not connected
Color/Status | HP Sprocket Condition | Description |
---|---|---|
Green | Fully Charged | Device is fully charged, 90-100% |
Amber | Medium Charge | Device charge is between 16-89% |
Blinking Red | Low Charge | Device has a low battery and will need to be charged |
soon (4-15%).
If the USB cable is not connected and your printer battery is critically low
(1-3% charged), the Status LED light will turn off and the printer will become
unresponsive. You will not be able to print when the battery is critically
low. The Charge LED will continue to blink red. Charge the printer as soon as
possible.
Charge LED: USB cable connected
Green | Fully Charged | Device is fully charged. |
---|---|---|
Amber | Medium Charge | Device charge is 16-99% |
Red | Low and Critically Low Charge | Device has a low battery and is charging. |
Troubleshooting
-
The Sprocket app will alert you to various error conditions through in-app messaging. Follow the app instructions to resolve issues.
For additional help on specific issues with your HP Sprocket Panorama Printer, see the Troubleshooting documents and FAQs on the HP Support site (sprocketprinters.com/pages/support). -
Getting Started
-
Installing Mobile App
To use your HP Sprocket Panorama Printer with your mobile device, you must download the companion Sprocket app from the App Store® or on Google Play™ (or your local app store). To download the Sprocket app, visit sprocketprinters.com/pages/support.
There, you will be directed to the appropriate app store for your device. -
Supported by Android™ devices using OS v5.0 and above / iOS 10.0.2 and above.
-
Made for iPhone 12, 12 Pro, 12 Pro Max, 12 Mini/11, 11 Pro, 11 Pro Max, SE 2/X, XR, XS, XS Max/8, 8 Plus/7, 7 Plus, SE/6, 6 Plus, 6s, 6s Plus/5, 5s, 5c and iPad Pro 12.9” (1st, 2nd, and 3rd generation), Pro 11”/iPad (4th, 5th, and 6th generation)/Pro 10.5”, Pro 9.7”/Air, Air 2/Mini 2, Mini 3, Mini 4 and iPod touch (6th generation).
-
You must install the companion Sprocket app to operate the HP Sprocket with your mobile device.
-
If you previously installed the Sprocket app, you can access setup instructions for HP Sprocket Panorama Printer in the Help & How To menu.
Loading Paper
- Take off the Paper Cover by lifting up. This will release the lid and allow you to lift off the Paper Cover to load paper. The lid is attached with magnets.
- Unwrap a pack of HP Sprocket Panorama Printer Photo Paper Roll. Stack the photo Paper Roll on top facing down.
- Place both the paper and Print Quality Card into the Paper Tray.
- Replace the Paper Cover to finish loading paper. You will feel the magnets latch the lid into place.
Print Quality Card Use:
Load the Print Quality Card with each new pack of paper. Each foil-pack has an
included colored card; the card is specially-made to prepare your printer for
the paper in that pack. The Print Quality Card cleans and calibrates the
printer for the pack of paper that it came in. The card will pass through the
HP Sprocket Panorama Printer automatically after loading paper. If you notice
print quality issues, load the colored card again. Discard the colored card
after you have printed all 5 sheets in the foil-pack. You will get a new Print
Quality Card for the next pack of paper you load.
What size paper do I need to buy for my HP Sprocket?
Only use HP Sprocket Panorama Printer 3.5 x 1.0 – 9.0″ (8.9 x 2.5 – 22.5cm)
Photo Paper (1 roll included) with HP Sprocket Panorama Printer.
You can purchase additional paper in the Sprocket app by tapping
“Buy Paper” in the Main Menu or from sprocketprinters.com.
Make sure to use genuine HP Sprocket Panorama Printer 3.5 x 1.0 – 9.0″ (8.9 x
2.5 – 22.5cm) Photo Paper Roll.
You can purchase genuine HP Sprocket Panorama Printer 3.5 x 1.0 – 9.0″ (8.9 x
2.5 – 22.5cm) Photo Paper Roll from the app or from other retailers.
Caution:
- Do not insert more than 1 pack of HP Sprocket Panorama Printer Photo Paper (5 sheets plus the Print Quality Card) into the device at a time to avoid paper jams or print errors.
- Only use HP Sprocket Panorama Printer with the device to avoid paper jams and malfunctions. You can purchase additional paper within the Sprocket app by tapping “Buy Paper” in the Main Menu.
- In the case of a paper jam, do not pull on the paper. Instead, turn the device off and on again to automatically eject the paper.
- Do not pull the paper out of the device during printing.
- If spills or moisture collect on a photo, wipe it away as soon as possible to prevent color damage.
- Keep photo paper clean and free of bends or damage for best print quality.
To charge, insert the USB-C Charging Cable into the HP Sprocket Panorama Printer.
Charging Battery and power On/off
- To charge, insert the USB-C Charging Cable into the HP Sprocket Panorama Printer.
- Connect the Micro-USB Cable to a power source.
- When connected, the Charge LED Indicator Light will turn on to indicate charging. See “LED Indicator Lights: Charge and Status” for more information.
- To charge fully, allow the device to charge until the Charge LED Indicator Light turns green.
- Turn on the device by pressing the Power Button until the Status LED Indicator Light illuminates and turns solid white(default) or personalized color. The printer can also be turned on by connecting the USB cable to a power supply.
- Turn off the device by pressing the Power Button until the Status LED Indicator Light goes dark.
• Continued use during charging will slow down the charging speed.
• Connect the USB-C Cable to a power source capable of supplying 5 V DC/2 A.
• Use only with Listed ITE (Information Technology Equipment)
Pairing a Mobile Device and the HP Sprocket Panorama Printer
Pair quickly and easily with your HP Sprocket Panorama Printer using the in-
app setup instructions.
On first launch of the Sprocket app, select “my sprocket”.
The in-app instructions will help you easily pair with your mobile device
within the app.
You can also access the setup instructions anytime from the Help & How To
menu.
For Android™ and iPhone®
- Press and hold the Power Button to turn on the printer. The Status LED Indicator Light will light up when fully powered on.
- Open the Sprocket app. Expand the Main menu and tap sprocket .
- Tap Manage Printers. This opens a dropdown list of printers you have previously connected to. Select your printer, or tap Add new printer.
- If you are adding a new printer, select the printer you want to connect to from the list. Follow the on-screen messages.
To add a new printer:
- Press and hold the Power Button to turn on the printer. The Status LED Indicator Light will light up once fully powered on.
- Open the Sprocket app. Expand the Main menu and tap sprocket .
- Tap Manage Printers. This will open a dropdown list of printers you have previously connected to. Select your printer, or tap Add new printer.
- If you are adding a new printer, select the printer you want to connect to from the list. Follow the on-screen messages.
Check out the HP Sprocket app user guide to learn more how to use the Sprocket app and all the fun features available for your printer!
Safety Information
For regulatory and safety notices, refer to the included sheet in your product
packaging and the following statements.
Battery Safety
- Do not disassemble the product or battery or short the battery terminals.
- Avoid contact with a leaking or damaged battery.
- Adult supervision is recommended when the product is being used by young children.
- Do not use the printer if the product battery is swelling and causing product expansion.
- Do not disassemble, strike, press, or put in a fire.
- Keep the device clear of high temperatures and moisture.
Specifications
Specifications | Description |
---|---|
Product number | HPISPPAN |
Dimensions and weight | •Dimensions: 5.1• x 6.4• x 1.1• (128.9x 162.7 x 28.9 |
mm)
•Weight: 0.9 lbs. (390 g)
Connectivity| Bluetooth 5.0
Printer management| HP Sprocket app
Power supply| Li-ion 7.4 V – 2 cell internal rechargeable battery 1.000 mAh
mAh internal battery
Charge time| 120 minutes
Power consumption| 0.94 W (standby)
Average 26 W (based on first print) Maximum 34 W at 25° C (77° F)
Print technology| Thermal printing with a ZINO’ Zero lite printer
•Note:The HPSprocket does not use ink cartridges to print.
Supported paper| HP Sprocket 3.5 x 1.0 – 9.0• (8.9 x 2.5 – 22.5cm) Photo Paper
Roll
Borderless printing| Yes
Supported file types| .jpeg..tiff (i0S only), .gif, .bmp, and .png
•Note: If you send a non-supported h:e type. the print job does not print.
Paper tray capacity| Up to 10 pages with the Print Quality Card
Memory| 64 MB
Print quality| 287 x 505 dots per inch (dpi)
Mobile connectivity| •Supported by Androidm devices using OS vS.0 and above /
iOS 10.0.2 and above.
•Made for iPhone 12. 12 Pro, 12 Pro Max. 12 Miliill. 11 Pro. 11 Pro Max, SE
2/X. XR, XS. X5 Max/8.8 Plus/7. 7 Plus. SE/6. 6 Plus. 6s. 6s Plus/S, Ss, Sc
and iPad Pro 12.9′ 0 st. 2nd. and 3rd generation), Pro 11-/iPad (4th, Sth, and
6th generation)/Pro 10.5, Pro 9.r/Air. Air 2/Mini 2, Mil 3, Mini 4 and Pod
touch (6th generation).
Control panel| Power Button: Reset Button:Charge and Status Indicator LED
Lights
Environmental parameters| •Operating humidity: 5% to 70% RH (recommended)
•Non-operating humidity: <5% RH or >71% RH
•Operating temperature: 5° to 40° C (41° to 104° F)
•Recommended operating temperature: 15° to 32° C (59° to 90° F)
•Storage temperature: -40° to 60°C (-40° to 140° F)
•Media Storage: 32-77° F (0-25° C), 40-60% RH
Warranty| One-year limited hardware warranty.
Visit sorocketorinters.com for more
information.
Regulatory Model Number| For regulatory identification purposes, your product
is assigned with a Regulatory Model Number. The regulatory model number should
not be confused with the marketing names or product numbers. The Regulatory
Model Number for your product is VCVRA-1901.
Technical Information
Regulatory notices
For regulatory, environmental, and safety notices, refer to the included sheet
in your product packaging and the following statements. This printer meets
product regulatory requirements from regulatory agencies in your country/
region. This section contains the following topics:
- FCC Statement
- Notice to Users in Canada
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has
specified that the following notice be brought to the attention of users of
this product.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Modifications (part 15.21)
Any changes or modifications made to this device that are not expressly
approved by HP may void the user’s authority to operate the equipment.
For further information, contact:
Manager of Corporate Product Regulations
HP Inc.
1501 Page Mill Road, Palo Alto, CA 94304, U.S.A
Email contact: (hpsprocket@caglobal.com) or Telephone contact:
877-424-9746
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice to users in Canada/Note à l’attention des utilisateurs canadiens
Under Innovation, Science and Economic Development Canada regulations, this
radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Innovation, Science and Economic
Developent Canada. To reduce potential radio interference to other users, the
antenna type and its gain
should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Innovation, Science and Economic Developent Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
The device has been evaluated to met general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Get in Touch:
www.sprocketprinters.com/pages/support
iPad, iPad Air, iPad Pro, iPad mini, iPhone, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Android and Google Play are trademarks of Google Inc. Google and Google Logo
are registered trademarks of Google Inc.
HP and Sprocket are owned by HP Inc. or its affiliates.
The ZINK Technology® and ZINK Trademarks® are owned by ZINK Holdings LLC. used
under license.
All other products, brand names, company names, and logos are trademarks of
their respective owners, used merely to identify their respective products,
and are not meant to connote any sponsorship, endorsement, or approval.
Manufactured and distributed by C&A Marketing, Inc. under license from HP Inc.
HP Inc., 1501 Page Mill Road, Palo Alto, CA 94304 © Copyright 2022 HP
Development Company, L.P. All Rights Reserved.
Made in Vietnam.
References
- HP Sprocket Printers and Paper - Shipping to USA, CA, UK and EU
- Support – Sprocket Printers
- Support – Sprocket Printers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>