xiaomi ZPDYJ03HT Instant Photo Printer 1S Set User Manual

xiaomi ZPDYJ03HT Instant Photo Printer 1S Set

Read this manual carefully before use, and retain it for future reference.

Product Overview

Accessory List

How to Install

Installing the Ribbon

1. Open the ribbon compartment.
2. Insert a new ribbon and make sure it is secured..

3. Close the ribbon compartment.

Note: Lift the red lever above the ribbon to remove the ribbon.

Loading 3″ Sticky-backed Photo Paper

1. Pull the paper tray holder open.
2. Rotate the holder vertically till it snaps to the paper tray bottom.

3. Open the paper tray cover.
   Note: Make sure the 3″ paper holder is in the paper tray.

4. Load the 3″ sticky-backed photo paper into the slot of the 3″ paper holder with the glossy side facing up.

Note: The printer may not feed paper if more than 10 sheets of 3″ sticky- backed photo paper are loaded.

5. Close the paper tray cover.

Loading 6″ Photo Paper

1. Pull the paper tray holder open.
2. Rotate the holder vertically till it snaps to the paper tray bottom.

3. Open the paper tray cover.
4. Remove the 3″ sticky-backed photo paper and the 3″ paper holder.

5. Load photo paper into the paper
6. Close the paper tray cover. tray with the glossy side facing up.

Note: The printer may not feed paper if more than 20 sheets of 6″ photo paper are loaded. Do not touch the area within the cutting lines of the photo paper.

Installing the Paper Tray

1. Pull the paper tray holder open.
2. Rotate the holder vertically till it snaps to the paper tray bottom.

3. Open the paper tray opening, and insert the paper tray into the printer.

How to Use

Placing the Printer
Since the paper will move back and forth during printing, make sure there is more than 10 cm of space behind the printer.
Note: The paper will move back and forth several times.

Storing the Printer
It is recommended to store the paper tray on top of the printer for saving space when the printer is not in use.

Turning On
Plug the power cord into the power port, and press the power button. When the power indicator is on and the Wi-Fi indicator blinks orange, the printer is turned on and the Wi-Fi is waiting to be connected.

Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your device with the Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app store to download and install it.
Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow the prompts to add your device.

Attention: The Mi Home/Xiaomi Home app is the only way to configure the network settings for the printer. Make sure the network connection is configured before using PC for wireless printing. The latest version of the app is suggested for a successful connection to the printer. The Dual-band steering function needs to be disabled for the router. When the printer is not connected to the network or the network connection is disconnected, it will automatically turn off after ten minutes. Please restart it and carry out the corresponding operations.

Notes

• If you fail to scan the printer’s QR code, search for its name to add it.
• The version of the app might have been updated, please follow the instructions based on the current app version.
• The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

Notes

• Connect to the app first and then select one of the following printing methods.
• Only 2.4 GHz Wi-Fi networks are supported.

Printing via the Mi Home/Xiaomi Home app
Make sure both the device and the printer are connected to the network and within Wi-Fi coverage. Then follow the instructions in the app to print.

Printing via AirPrint for Apple devices
Make sure both the Apple device and the printer are connected to the same Wi- Fi network and within Wi-Fi coverage, or the function of direct connection is enabled.
Open the file you want to print, and find the print option in the share menu (if no share menu or print option can be found, you can download the file to the system album of your device). Then select the printer named “Xiaomi Instant Photo Printer 1S [XXXX]”, set print parameters, and print the file.

Printing via Android Devices
Make sure both the Android device and the printer are connected to the same Wi-Fi network and within Wi-Fi coverage, or the function of direct connection is enabled.
Go to the album, and select the photo you want to print. If the photo print function is not accessible on the album of your phone, please visit https://mopria.org/print-from-android to download the app, and learn how to print.
Note: The Android system does not support the printing of 3″ photos.

Wireless Printing via PC
Make sure both the PC and the printer are connected to the same Wi-Fi network and within Wi-Fi coverage, or the function of direct connection is enabled. Then follow the steps below to configure the printer’s connection.

• Windows 7
  Click Control panel > Hardware and sound > Devices and printers > Add a printer > Add a network, wireless or Bluetooth printer,
  then select “Xiaomi Instant Photo Printer 1S [XXXX] – Wi-Fi”.

• Windows 8/8.1
  Click Control panel > Hardware and sound > Devices and printers > Add a printer, then select “Xiaomi Instant Photo Printer 1S [XXXX] – Wi-Fi”.

• Windows 10
  Click Settings > Devices > Printers and scanners > Add a printer or scanner, then select “Xiaomi Instant Photo Printer 1S [XXXX] – Wi-Fi”.

Notes

• Before installing the driver, make sure that Windows is allowed to update, and already has been updated to the latest version.
• When it cannot be installed automatically, go to ”http://i01.appmifile.com/webfile/globalweb/drivers/Xiaomi_Photo_Printer_1S.zip” to download the driver.

Direct Connection Settings and Printing
Note: You can connect your device with the printer via this function without a router.

Direct Connection for Apple and Android Devices to the Printer

1. Enabling the direct connection function
   Press and hold the direct connection button for 3 seconds. When the direct connection indicator blinks orange, the printer is awaiting connection.

2. Connecting to Wi-Fi
   Enable the wireless network of the device, and select “Xiaomi Photo Printer 1S [XXXX]”. Check the printer’s hotspot password on the barcode label at the bottom of the printer, and enter the password to connect the printer to the device. After the device is successfully connected to the printer, the direct connection indicator will remain blue.

3. Printing
   Open the album, and select the photos you want to print. Tap Print, and select the printer named “Xiaomi Instant Photo Printer 1S [XXXX]” to print.
   Notes:

   • In the wireless network name and the printer name, “XXXX” is the last four digits of the serial number, which can be found on the barcode label at the bottom of the printer.
   • The printer’s hotspot is for printing only and does not support Internet access. After the Android device is connected to the printer’s hotspot, its mobile network cannot work.
   • If the photo print function is not accessible on the album of your Android phone, please visit https://mopria.org/print-from-android to download the app, and learn how to print.

Direct Connection for Windows Devices to the Printer

1. Downloading & installing driver
   Go to “http://i01.appmifile.com/webfile/globalweb/drivers/Xiaomi_Photo_Printer_1S.zip” to download the driver.

2. Enabling the direct connection function
   Press and hold the direct connection button for 3 seconds. When the direct connection indicator blinks orange, the printer is awaiting connection.

3. Connecting to Wi-Fi
   Enable the wireless network of the device, and select “Xiaomi Photo Printer 1S [XXXX]”. Check the printer’s hotspot password on the barcode label at the bottom of the printer, and enter the password to connect the printer to the device. After the device is successfully connected to the printer, the direct connection indicator will remain blue.

4. Adding a printer
   Follow the same paths described in the Wireless Printing via PC.

5. Printing
   Open the photo file you want to print with image editing software. Click Print, and select the printer named “Xiaomi Instant Photo Printer 1S [XXXX]” to print.

Cautions

• The recommended operating temperature is 10°C to 35°C, and the printing quality may be affected when the ambient temperature is too high.
• To ensure the printing quality, do not use non-genuine ribbon or photo paper.
• While printing, make sure the photo paper is placed flat with the glossy side facing up inside the paper tray.
• With the dye-sublimation printing technology, the print head will be heated during printing and may remain hot for a while even after the printing is completed. To avoid getting burned, do not touch the print head.
• During the printing process, the photo paper will move back and forth in the printer several times and will be ejected automatically after the printing is finished. Please be patient and do not pull out the paper with force to avoid damaging the printer.
• When planning not to use the printer for a long time, it is recommended to remove the paper tray, and close the paper tray opening, the paper tray holder, and the paper tray cover to prevent dust from getting into the printer. Otherwise, the quality of future prints would be negatively affected.
• Do not touch the glossy side of the photo paper, nor the plastic film of the ribbon, to avoid the printing quality being affected by any fingerprints left.

Regulatory Compliance Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.

FCC & IC statement
This device complies with Part 15 of the FCC Rules / Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

Warranty Notice

As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi’s official website https://www.mi.com/en/service/warranty/. Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user’s negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify. The present warranties do not apply in Hong Kong and Taiwan. Products that were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.

Federal Communications Commission Supplier’s Declaration of Conformity

This supplier’s declaration of conformity is hereby for
Product: Xiaomi Instant Photo Printer 1S
Model Number(s): ZPDYJ03HT
Brand/Trade: Xiaomi

We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Responsible Party – U.S. Contact Information

Company: Tekmovil LLC
Address: 601 BRICKELL KEY DR #723 MIAMI, FL 33131
Country: U.S.A.
Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
For detailed e-manual, please go to www.mi.com/global/service/userguide

Xiaomi Instant Photo Printer 1S Set

• Name : Xiaomi Instant Photo Printer 1S

• Model : ZPDYJ03HT

• Item Dimensions : 194 × 124.6 × 83.6 mm

• Net Weight: Approx. 1.2 kg
  (including photo printer, 3″ paper holder, power adapter, paper tray, ribbon, 3″ sticky-backed photo paper × 10, 6″ photo paper × 10, photo album)

• Input: 24 V 1.6 A

• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

• Operating Temperature: 10°C to 35°C

• Operation Frequency: 2400-2483.5 MHz

• Maximum Output Power: 18 dBm

• FCC ID: 2AZHDZPDYJ03HT

• IC: 28632-ZPDYJ03HT

• Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Hannto Technology Co., Ltd. (a Mi Ecosystem company)

• Address: Room 704, Building 1, Lane 88 Shengrong Rd. Pudong, Shanghai, China For further information, please go to www.mi.com

References

• Xiaomi United States | Xiaomi Official Website
• Support - User Guide | Xiaomi Global
• Print From Android
• Xiaomi Global Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>