FUJITSU FWM8BLZ09 USB Dongle Series User Manual
- June 11, 2024
- FUJITSU
Table of Contents
FUJITSU FWM8BLZ09 USB Dongle Series
Product Information
- The FWM8BLZ09 is a USB dongle-shaped unit designed for communication in the ISM (Industrial Scientific Medical) band. It is manufactured by Fujitsu Component Limited, a company based in Tokyo, Japan. The device is compliant with FCC Rules and ISED licence-exempt RSSs and meets the essential requirements and other relevant provisions of Directive 2014/53/EU.
- The device emits very low levels of RF energy and is deemed to comply without testing of specific absorption rate (SAR). The device must not be co-located or operated in conjunction with any other antenna or transmitter. It is strictly forbidden to use an antenna except the designated one.
- Contact information for Fujitsu Components America, Inc. is provided for users in the United States of America, while Canadian Representative information is provided for users in Canada.
Product Usage Instructions
- To use the FWM8BLZ09, insert it into a USB Type-A female connector shape. Ensure that you do not use any antenna except for the designated one, as this may compromise the device’s operation. Additionally, do not co-locate or operate the device in conjunction with any other antenna or transmitter.
- For users in the United States of America, note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Ensure that you comply with FCC Rules and the FCC radio frequency (RF) Exposure Guidelines.
- For users in Canada, note that the device complies with ISED licence-exempt RSSs. Ensure that you comply with these regulations and do not cause interference or operate the device in conjunction with any other antenna or transmitter.
This product is a USB dongle shaped unit capable of communication in the ISM (Industrial Scientific Medical) band. Communication in the ISM (Industrial Scientific Medical) band is possible by inserting into the USB Type-A female connector shape.
Note to users in the United States of America
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Declaration of Conformity
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Contact information
FUJITSU COMPONENTS AMERICA, INC
Company address: 350 Cobalt Way, MS#160, Sunnyvale, CA 94085 USA
Tel : +1-408-745-4900
It is strictly forbidden to use antenna except designated.
- This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate(SAR).
Note to users in Canada
It is strictly forbidden to use antenna except designated.
This equipment must not be co-located or operated in conjunction with any
other antenna or transmitter.
This device complies with ISED licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have
not been confirmed by additional research. FWM8BLZ09 has been tested and found
to comply with ISED radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
Canadian Representative: Canadian Certification Consulting, Inc.
Address: 2210 Horizon Drive, Suite17, West Kelowna, BC V1Z 3L4, Canada Tel:
1-250-575-1719
European Community Compliance Statement
Note: Hereby, Fujitsu component Limited, declares that this FWM8BLZ09 is
in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.fcl.fujitsu.com/products/wireless-
modules/information/red.html
- Model: FWM8BLZ09
- Manufacturer: Fujitsu Component Limited
- Address: Shinagawa Seaside Park Tower, 12-4, Higashi-shinagawa 4-chome,Shinagawa-ku, Tokyo, 140-8586, Japan
- Importer: FUJITSU COMPONENTS EUROPE B.V.
- Address: Diamantlaan 25, 2132 WV Hoofddorp, The Netherlands
United Kingdom Compliance Statement Note:
Hereby, Fujitsu Component Limited, declares that this FWM8BLZ09 is in
compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following
internet address: https://www.fcl.fujitsu.com/products/wireless-
modules/information/red.html
- Model: FWM8BLZ09
- Manufacturer: Fujitsu Component Limited
- Address : Shinagawa Seaside Park Tower, 12-4, Higashi-shinagawa 4-chome,Shinagawa-ku, Tokyo, 140-8586, Japan
- Importer: FUJITSU COMPONENTS EUROPE B.V.
- Address: Diamantlaan 25, 2132 WV Hoofddorp, The Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>