Shenzhen Wanxingjun Technology Co Ltd WXG01 Wireless Doorbell User Manual

Wireless Doorbell Manual

Thanks you for using our product please install and use it correctly according to the manual

Transmitter

Receiver

Parameters:

Instructions:

Transmrtter key. press the transmitter key. Tie transmtter indicator witl light up. the receiver will ring and The incbcator tight flashes skiety Recerver music key. short press to switch the nnging tones of different music backgrounds Long press.Stay for more than 2 seconds and the bell wil return to ttie first song Roomer volume key short prcessto switch between different sizes Sound. 4 gears in totakolf. cycle switching. Press and hold kit more than 2 seconds to Wain the code

Signal Match:

How to match

1. Plug the recerver into the mans power supply. and the indicator light wilt be on for 3 seconds The receiver has been plugged n (Note If pairing is required. press and hold the volume button for more than 2 seconds. and the indicator Ight we enter the flash statePress the transmitter to enter the paring. and the receher nngs after the paring ns successful.)
2. If multere recasts or transmitters need to be paired follow the tirst point of pairing above Can
3. Cancel parng press the brokers key and MAC key to niece than 5 seconds at the same tine to see the receiver indication The tight turns on and offend the previous panng nformaton is deleted If you want to use the doorbell ftnacn. you need to reconfigure it Yes, lust folbo• the first point of panng Note:signal match has been completed by manufacture, no further actions required.

Transmitter Installation:

Attention:

1. Test transmitter at installation position before fix. check the tecerver can work properly or not.
2. Wireless signal transmission distance is affected by metal, walls. concrete. obstacles. etc. avoid installing the transmitter on a metal door or frame ( signal only can teach 10-80m if need to through metal doors. concrete walls. etc).
3. Keep the receiver away from magnetic field interference sources such as televisions induction cookers. speakers. etc
   • Please don’t disassemble the receiver to avoid safety problems.
   • Please avoid to prolonged exposure under the sunlight , it will cause product life shorten .
   • When the transmission signal becomes weak, please replace the battery .
   Packing List:
   Transmitter/Receiver/Battery/Manual/Tape/Screw

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
– Reorient the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>