Brookstone BSBTH20 Sleek Wireless Noise Isolating Headphones User Manual
- June 11, 2024
- Brookstone
Table of Contents
BSBTH20 Sleek Wireless Noise Isolating Headphones
User Manual Sleek Wireless
Noise Isolating Headphones
Before You Begin…
READ CAREFULLY AND KEEP THIS MANUAL
Caution
To ensure safe and proper use, read all safety information before using the
device. Only use with manufacturer-approved batteries, chargers, accessories,
and supplies.
- THIS DEVICE IS NOT A TOY. keep away from children and pets.
- Do not disassemble, modify, or repair the device.
- Do not expose to extreme temperatures (heat or oold), open flames, humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge battery.
- If using with a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders. etc.
- The headphones contain a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.
In the Box
- BSBTH2O – Wireless Headphones (x1)
- USB Type-C Charging Cable (x1)
- User Manual (x1)
Location of Controls
-
Next Track / Volume Up
-
Power
Press & Hold (3 Sec): Power On
Press & Hold (4 Sec): Power Off
Play/Pause
Answer/End Calls
Double Click: Re-dial Last Dialed Phone Number
Press & Hold (1-2 Sec): Reject Incoming Call -
Previous Track / Volume Down
-
Type-C Charging Port
-
LED Indicator
-
Microphone
Getting Started
Charging the Headphones
Plug the smaller (Type-C) end of the included USB charging cable into the
Type-C charging port on the right earcup. Plug the larger (Type-A) end into
the USB port on a computer or a compatible 5V USE adapter (not Included) and
plug into a wall socket.
The LED indicator on the headphones will turn RED while charging and turn
WHITE when finished charging. Full charging time is appx. 2 hours.
Powering ON/OFF
- Press and hold the Power button for 3 seconds to power the headphones ON.
- Press and hold the Power button for 4 seconds to power the headphones OFF.
Bluetooth Pairing
- Power the headphones ON. A voice will be heard, and the LED indicator will flash WHITE.
- Set your mobile device to search for Bluetooth devices. Select BSBTH2O from the list of found devices.
- After a successful pairing, a voice will be heard and the LED indicator will turn solid WHITE, and then the LED indicator will flash WHITE while playing music.
In Bluetooth mode, playback and volume can be adjusted with the on-ear controls, or with your paired device.
- Press the Power button to pause and resume playback.
- Press the Next Track [ + ] and Previous Track [ – ] buttons to skip tracks.
- Press and hold the Volume Up [ + ] and Volume Down [ – ] buttons to adjust volume.
Phone Calls
To use the phone functions on the headphones, you must be connected to a
Bluetooth-enabled device.
- Press the Power button once to answer phone calls. Playback will automatically pause and resume.
- 2x press the Power button to dial the last outgoing phone number
- Press and hold the Power button to reject an incoming call and send straight to voicemail.
Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or
dismantle the battery and do not use it in damp and/or corrosive conditions.
Use only with compatible chargers. Never dispose of batteries in a fire, and
never expose them to high temperatures. Do not expose the product to
temperatures exceeding 60°C (140°F).
Rating Label Definitions
Direct current symbol.
This symbol signifies the product must not be discarded as household
waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment.
This symbol signifies and declares that this equipment has battery charging
which complies with California CEC and energy efficiency.
This symbol signifies that this is a wireless device powered by Bluetooth®
technology.
This symbol represents FCC Declaration of Conformity and compliance.
All product names, trademarks, and registered trademarks are property of their
respective owners. All company, product, and service names used In this
document are for identification purposes only. Use of these names, trademarks,
and brands does not imply endorsement.
Warranty Information
90-Day Limited Warranty Territory: United States
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is
warranted by Southern Telecom, Inc. to the original consumer purchaser against
defects in materials and workmanship (“Warranty”) as follows:
To obtain warranty service:
- Visit our customer support portal: www.customersupport123.com and select “Support”.
- Select the brand, fill out the corresponding form (exchanges require dated proof of purchase from an authorized retailer) then submit your request.
Your product will be repaired or replaced, at our option, for the same or
similar model of equal value if examination by the service center determines
this product is defective. Products received damaged as a result of shipping
will require you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, unauthorized
modification including software modifications such as the installation of
custom firmware. This warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being returned to the
authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER
DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH
RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT,
OR REFUND OF THE ORIGINAL PURCHASE PRICE -AT DISTRIBUTOR’S SOLE DISCRETION –
ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR
ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL,
PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR
LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE
OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES
SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST
DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY
DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation
of incidental or consequential damages or allow limitations on warranties, so
limitation or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may have other rights that vary from state to
state or province to province. Contact your authorized retailer to determine
if another warranty applies.
BSBTH2O Designed in US
Printed in China V.1 02-2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>