WINMATE M140TG Rugged Tablet PC User Guide

WINMATE M140TG Rugged Tablet PC

Product Information

• Product Name: M140TG Rugged Tablet PC
• Processor: Intel Core i51135G7 @ 2.40GHz, up to 4.20GHz
• Quick Start Guide Version: 1.0
• Document Part No.: 9152140K1003
• Manufacturer Website: https://dc.winmate.com

Product Usage Instructions

1. Please read the instructions carefully before using the product and save the manual for future reference.
2. Ensure that the ventilation openings of the product are not blocked and the product is not placed against a wall or in an enclosed space, as it might impede the flow of cooling air.
3. Avoid placing the product near any heat sources such as radiators, warm air intakes, stoves, or other heat-generating devices (including amplifiers or other heat-producing equipment).
4. Protect the power cord from being crushed or pinched, particularly in the area of the plugs, any receptacles used, and the point of exit from the apparatus. Do not break off the ground pin of the power cord.
5. Use only with its transport carriage, stand, tripod, console, or table specified by the manufacturer or sold with the product. When using a carriage, move the carriage assembly with the product carefully to avoid damage from falling over.
6. Unplug this apparatus during lightning storms or when it is not being used for long periods.
7. If the apparatus has been damaged in any way, refer all servicing to qualified service personnel. Examples of damage include if the power cord or plug is damaged, liquid has been spilled, or objects have fallen inside the unit, if the product has been exposed to rain or moisture if it does not operate normally, or if it has been dropped.
8. To clean the product, follow the cleaning guidelines provided in the manual.

Read Me First

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory.

Note
A note is used to emphasize helpful information.

Important
An important note indicates information that is important for you to know.

Caution A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem.
Warning! An Electrical Shock Warning indicates the potential harm from electrical hazards and how to avoid the potential problem.

Safety Information

Precaution on Battery Pack

• Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte leakage, generation of heat, ignition, or rupture may result.
• Do Not Short the Positive (+) and Negative (-) Terminals of the Battery. Generation of heat, ignition, or rupture may result. When carrying or storing the device, do not place the battery pack with articles that may contact with electricity.
• Do Not Apply Shocks to the Battery by Dropping It or Applying Strong Pressure to It. Electrolyte leakage, generation of heat, ignition, or rupture of the battery may occur.
• Do Not Charge the Battery Other Than Methods Specified In This Manual. If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition, or rupture may result.
• When the Battery Pack Has Deteriorated, Replace It with a New Battery. Continued use of a damaged battery pack may result in heat generation, ignition, or battery rupture.
• Do Not Expose the Battery Pack to Excessive Heat or Extreme Heat (for example, Near Fire, in Direct Sunlight) Generation of heat, ignition, or rupture may result.
• Do Not Use the Battery Pack With Any Other Products. The battery pack is rechargeable and is only designed for this specific product. Electrolyte leakage, generation of heat, ignition, or rupture may result if used with a product other than the specified product.
• Do Not Use This Product With Battery Other Than the One Specified.
• Discontinue using the device immediately if you notice the battery is swelling or looks puffy or misshapen. Do not attempt to charge or use the device. Do not handle a damaged or leaking battery. Do not let leaking battery fluid come into contact with your eyes, skin, or clothing.

General Product Safety

• Do not block any ventilation openings. Do not place the product against a wall or in an enclosed space, as doing so might impede the flow of cooling air.
• Do not place the product near any heat sources such as radiators, warm air intakes, stoves, or other heat-generating devices (including amplifiers or other heat-producing equipment).
• Protect the power cord from being crushed or pinched, particularly in the area of the plugs, any receptacles used, and the point of exit from the apparatus. Do not break off the ground pin of the power cord.
• Do not disregard the safety that a polarized or grounded connection can provide. A polarized connection consists of two plugs, one of which is larger than the other. A grounded connection has two blades and a third one that is grounded. If the main plug provided cannot be inserted into your outlet, consult an electrician to replace your obsolete outlet.
• Use only accessories specified by the manufacturer.
• This product should not be used near water such as bathtubs, sinks, swimming pools, wet basements, etc.
• Use only with its transport carriage, stand, tripod, console, or table specified by the manufacturer or sold with the product. When using a carriage, move the carriage assembly with the product carefully to avoid damage from falling over.
• Unplug this apparatus during lightning storms or when it is not being used for long periods.
• Refer all servicing to qualified service personnel. A technical intervention is required when the apparatus has been damaged in any way, for example, if the power cord or plug is damaged, liquid has been spilled, or objects have fallen inside the unit if the product has been exposed to rain or moisture, if it does not operate normally or if it has been dropped.

General Guideline

It is recommended to reboot the device when some functions are defective or inactive. If it still can’t solve the problems, please contact your dealer or agent.

Handling and Maintenance

• Keep the product at least 13 cm (5 inches) away from electrical appliances that generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker.
• Do not place heavy objects on top of the tablet computer as this may damage the display.
• The screen surface can be easily scratched. Use with care. Do not use paper towels to clean the display but use the included cleaning cloth. Avoid touching it with a pen or pencil.
• To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that prevents the power management from working.

Cleaning Guideline

• Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the product.
• Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the product.

Touchscreen Guideline

• Use your finger or the stylus on display. Using sharp or metallic objects may cause scratches and damage the display, thereby causing errors.
• Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To clean off hard-to-remove dirt, blow some steam on the particular area and gently wipe it away using a soft cloth.
• Do not use excessive force on display. Avoid placing objects on top of the display as this may cause the glass to break.
• When there is a noticeable discrepancy in the operation of the touchscreen function (your touch does not correlate to the proper location on the screen), recalibrate the touchscreen display.

Declaration of Conformity (DoC)

FCC Statement

This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class “B” digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This product meets applicable national SAR limits of 1.6W/kg. These specific maximum SAR values can be found in the section of this user guide. When carrying the product or using it while worn on your body, maintain a distance of 0mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not Surfing the Internet. Body SAR: 0.91W/kg This product meets applicable national SAR limits of 1.6W/kg. These specific maximum SAR values can be found in the section of this user guide. Note that the product may be transmitting even if you are not Surfing the Internet. Body SAR: 0.91 W/kg

IC Statement

REN statement The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEC/IEEE 62209-1528. This equipment should be installed and operated with a minimum distance 0 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Rugged Tablet PC M140TG Quick Start Guide

CE Notice (European Union)
This equipment is in conformity with the requirement of the following EU legislation and harmonized standards. The product also complies with the Council’s directions.
Electromagnetic Compatibility Directive (2014/30/EU)

• EN55035: 2017/ A11: 2020

  • IEC61000-4-2: 2009
  • IEC61000-4-3: 2020
  • IEC61000-4-4: 2012
  • IEC61000-4-5: 2014
  • IEC61000-4-6: 2014
  • IEC61000-4-8: 2010
  • IEC61000-4-11: 2004

• EN55032: 2015 +A11:2020

• EN61000-3-2:2019

• EN61000-3-3:2013+A1:2019
  Low Voltage Directive (2014/35/EU)

• EN 62368-1:2014+A11:2017

Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

Winmate Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s) conveys no license or title under any patent, copyright, or masks work rights to these products, and make no representations or warranties that these products are free from patent, copyright, or mask work right infringement unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or guarantee that such an application will be suitable for the specified use without further testing or modification.

Getting Started

Introduction

Congratulations on purchasing Winmate® 14-inch Rugged Tablet PC M140TG/T.
M140TG/T is a rugged tablet with robust features designed to withstand industrial use while providing high-tech solutions that increase productivity, improve safety, and reduce operational costs. It features:

• 11th Gen. Intel® Processor Family – Tiger Lake Processor
• 14-inch tablet, 1920 x 1080 wide viewing angle LED Panel
• Optical bonding and Anti-glare technology for sunlight readability
• IP65 waterproof and dustproof
• Hot-swappable battery for whole day work

Unpacking

Check and identify the supplied accessories:

Your package may include other optional accessories based on your order:

Description of Parts

• Dimensions: 341.91 x 224.67 x 25.4 mm

Tablet Computer
2| Digital Microphone| Enable audio recording for communications, music vocals, speech, and sound recording.
3| Front Camera| 2 Megapixel Webcam
4| LED

Indicators

| Show the current status of the tablet computer:

battery status and power status.

only supported with a 3.5mm 4-pin headset)

7| USB 3.0

Type-A

| USB 3.0 port connects to USB devices, such as

USB flash drive, mouse, keyboard, printer, etc.

8| USB 3.0

Type-C

| A high-speed USB port connects to USB devices.
 |  | Note: The USB Type-C connector follows USB 3.0 standards, not supporting Alternate Mode (ALT) or USB Power Delivery

(USB-PD).

10| Reset Button| Hardware reset button
11| USB 3.0

Type-A

| USB 3.0 port connects to USB devices, such as

USB flash drive, mouse, keyboard, printer, etc.

12| RJ45

Connector

| Connects the LAN cable.
13| Power Jack| DC power input jack.

Rugged Tablet PC M140TG Quick Start Guide

Capture photos and videos.

18| Kickstand Handle| User-adjustable 180° kickstand handle
19| Stylus| Use as an input.
20| Battery| 11.4 V, typ. 3500 mAh. Li-ion rechargeable

battery (3S1P)

21| Service

Windows

| Access to SSD and

WWAN module.

key configured by Hottab Utility

26| Kensington unlock| Use to attach tablet computer around a table leg or another secure location.

Indicators

No light – None of the WLAN / BT is ON.

| Disk Activity Indicator| Green – Hard drive activity.

No light – Hard drive idling.

| Power Indicator| Blue – Tablet is ON

No light – Tablet is OFF

| Battery Status| Orange –AC adapter is plugged in and charging

Green –AC adapter is plugged in, and the battery is fully charged

Solid Red – Low battery (<10%)

Blinking Red – Battery is hot-swapped.

No light – Battery is in use, and more than 10%

Hotkey for Specific Functions
Physical buttons with its dedicated functions can also be used to emulate commonly used keyboard keystrokes. Under a different scenario, a single physical button or a combination of physical buttons provide different keyboard keystrokes, which are specified below:

In POST (before Windows boots up)

In Windows

First-Time Operation

Installing Battery
To install the standard battery pack.

1. Disconnect any cords connected to the tablet computer and turn the tablet over, back facing up.
2. Insert the battery with the connector-pins side first, and then lower the battery into the battery compartment. The battery will be flat against the housing once fully inserted.
3. Slide the Battery Lock to the “Locked” position.

To remove the battery pack:

1. Shut down the tablet (or put it into sleep mode). Disconnect any cords connected to the computer.
2. Turn the tablet computer over, back facing up.
3. Push and hold the Battery Release Latch while lifting the battery out of the compartment.

Charging Your Tablet
The tablet operates either on external AC power or internal battery power. It is recommended to use AC power when you start up the tablet for the first time.

Caution Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer and the Battery.
Attention Utilisez uniquement l’adaptateur secteur fourni avec votre tablette. L’utilisation d’autres adaptateurs secteur peut endommager la tablette et la batterie.

To connect a tablet to AC power:

1. Open I/O protective cover by pulling out the latch.
2. Plug the DC cord of the AC adapter into the power jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Plug the AC power cord into the electrical outlet.

The battery LED indicator shows different battery states:

• Orange – AC adapter is plugged in and the battery is charging.
• Green – AC adapter is plugged in and the battery is fully charged.
• Solid Red – Low battery level (<10%).
• Blinking Red – Battery is hot-swapped.
• No light – Battery is in use and charged (>10%).

Starting the Tablet

Important

When powering on the device for the first time, please make sure there’s no interruption during the Windows setting up process, for example, accidentally powering off. If it happened, please access the recovery menu by pressing Fn1 button to initiate the recovery process.
Press and hold the power button for 3 seconds until the blue LED power indicator light up.

Note

• Do not press the power button repeatedly.
• Do not perform the following operations until the tablet is booted to Windows.
• Connecting or disconnecting the AC adapter
• Pressing the power button
• Touching the tablet buttons, screen, or external keyboard/mouse

To power off the Tablet Computer:

1. Make sure you have closed any programs that are open on the desktop. Start Screen apps don’t need to be closed.
2. Tap on Power.
3. Tap on Shut Down.
4. Wait for Tablet Computer to power off.

Note
The computer will forcibly be powered off if the power button is pressed and held for 6 seconds or longer.

Charging Your Tablet
The tablet operates either on external AC power or internal battery power. It is recommended to use AC power when you start up the tablet for the first time.
Caution Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer and the Battery.
Attention Utilisez uniquement l’adaptateur secteur fourni avec votre tablette. L’utilisation d’autres adaptateurs secteur peut endommager la tablette et la batterie.

To connect a tablet to AC power:

1. Open the I/O protective cover by pulling out the latch.
2. Plug the DC cord of the AC adapter into the power jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Plug the AC power cord into the electrical outlet.

The battery LED indicator shows different battery states:

• Orange – AC adapter is plugged in and the battery is charging.
• Green – AC adapter is plugged in and the battery is fully charged.
• Solid Red – Low battery level (<10%).
• Blinking Red – Battery is hot-swapped.
• No light – Battery is in use and charged (>10%).

Starting the Tablet

Important
When powering on the device for the first time, please make sure there’s no interruption during the Windows setting up process, for example, accidentally powering off. If it happened, please access the recovery menu by pressing Fn1 button to initiate the recovery process.
Press and hold the power button for 3 seconds until the blue LED power indicator light up.

Note

• Do not press the power button repeatedly.
• Do not perform the following operations until the tablet is booted to Windows.
• Connecting or disconnecting the AC adapter
• Pressing the power button
• Touching the tablet buttons, screen, or external keyboard/mouse

To power off the Tablet Computer

1. Make sure you have closed any programs that are open on the desktop. Start Screen apps don’t need to be closed.
2. Tap on Power.
3. Tap on Shut Down.
4. Wait for Tablet Computer to power off.

Note
The computer will forcibly be powered off if the power button is pressed and held for 6 seconds or longer.

Appendix A: Product Specifications

Display

| Size| 14 inches
Resolution| 1920 x 1080
Brightness| 700 nits
Contrast Ratio| 800:1
Viewing Angle| 85,85,85,85
Touch| Projected Capacitive Multi-Touch
Bonding| Optical Bonding for Sunlight Viewability

System Specification

| Processor| Intel Core i51135G7 @ 2.40GHz, up to 4.20GHz
System Memory| 4GB DDR4 SDRAM
Storage| 128GB SSD
Operating System| Windows 10 IoT Enterprise (64-bit)
WLAN| Support
Bluetooth| Support
Camera| Front Camera| 2MP Front Camera
Rear Camera| 8MP Rear Camera with auto-focus and LED light

Mechanical

| Dimensions| 341.91 x 224.67 x 25.4 mm
Weight| 1.7 Kg
Cooling System| Fan design

I/O Ports

| USB Port| 2 x USB 3.0 (Type A), 1 x USB 3.0 (Type C)
Video| 1 x Micro HDMI

Audio

| 1 x Headphone Combo Jack

Integrated Digital Mic with Noise Cancellation Integrated Stereo Speaker

SIM Card Slot| 1 x Nano SIM card slot
Indicator| 4 x LED Indicator for Power, Battery, SSD, RF status
LAN| 1 x RJ45-10/100/1000 Mbps LAN

Environment

| Operating Humidity| 10% to 90% RH, non-condensing
Operating Temperature| 0°C to 35°C (AC mode), -10°C to 50°C (Battery mode)
Storage Temperature| -20°C 至 60°C(-4°F 至 140°F)
Shock| MIL-STD-810H Method 516.8 Procedure I
Vibration| MIL-STD-810H Method 514.8 Procedure I
Drop| MIL-STD-810H Method 516.8, 4 ft.
IP Rating| IP65-certified, dustproof, and waterproof

Security Function

| SOTI MobiControl| SOTI MobiControl Compliance
Trusted Platform Module (TPM) 2.0| Support
Model Name| M140TG / M140TGT
---|---
 | Kensington Lock| Support
Control| Button| 1 x Power

3 x Programmable function Keys

Power

| Internal Battery| 11.4V typ. 2300 mAh Li•Ion Battery
Hot-swappable Battery| 11.4V, typ. 3500 mAh Li•Ion Re-chargeable Battery (3S1P) Hot•Swap (Optional)
Battery Operating Time| Standard Battery: 8 hours
Power Rating| 19V DC
Adapter| Input: AC 100-240V; 50-60Hz; 1.7A Output: DC 19V, 3.42A, 65W

Accessory

|

Standard

| Adapter and Power Cord Standard Battery
 |

Optional

| Kickstand Stylus
Certification| Certification| CE, FCC

NOTE

1. Accessories and Integrated Options may vary depending on your configuration. The product shown in this document is a standard model. For diagrams that contain customized or optional I/O, please contact the Winmate Sales Team for more information.
2. All specifications are subject to change without prior notice.

US Inc Service

• Winmate Communication US Inc.
• 2640 Mathews Street, Smyrna, GA 30080
• Tel : +1-678-653-8800

Winmate Inc.

• 9F, No.111-6, Shing-De Rd., San-Chung District,
• New Taipei City 24158, Taiwan, R.O.C  www.winmate.com

Copyright © 2022 Winmate Inc. All rights reserved.

https://dc.winmate.com

References

• Winmate - Rugged Tablet|Rugged laptop|Panel PC|Display
• Winmate Download Center -Overview

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>