Optoma ZU820TST Laser Projector User Guide

: June 9, 2024
: Optoma

Table of Contents

Optoma ZU820TST Laser Projector
Product Information
Product Usage Instructions
Connection
Battery installation
POWER
PLUGINS
REMOTE
Safety information
Documents / Resources

Optoma ZU820TST Laser Projector

Optoma-ZU820TST-Laser-Projector-PRODUCT

Product Information

This user manual provides basic instructions and safety information for using the Optoma projector. It is important to ensure that the operating environment meets the requirements specified in the user manual to avoid damaging the projector or causing personal injury. The projector should only be repaired by authorized service personnel. The product comes with a warranty and return policy, and Optoma Technology, Inc can be contacted for support and service.

Product Usage Instructions

Ensure that the operating environment meets the requirements specified in the user manual.
Connect the projector to a power source and turn it on using the power button.
Adjust the focus and zoom as needed using the controls on the projector or remote control.
Connect a video source to the projector using an appropriate cable.
Use the remote control or controls on the projector to adjust settings such as brightness, contrast, and color.
When finished, turn off the projector using the power button and disconnect it from the power source.

Note that leaving batteries in the remote control for long periods of time may cause them to leak. If this occurs, remove the batteries and clean any residue from the battery compartment. If any issues or repairs are needed, contact Optoma Technology, Inc for support and service.

Connection

Battery installation

POWER

USING

PLUGINS

Optoma-ZU820TST-Laser-Projector-FIG-6

REMOTE

Note:

For warranty information, please visit our website: www.optoma.com
For detailed instructions, please scan the QR code or visit the URL: https://www.optoma.com/support/downloa

Safety information

Before operating the projector, it is essential to read the full safety information in the user manual.
Do not look into the projector lens during operation. The bright light may harm your eyes.
Do not block projector inlet or outlet air vents. Do not place the projector on an unstable surface as it may damage the projector or injure the personnel.
Only use attachments/accessories specified by the manufacturer.
Do not let objects or liquids enter the projector as it may cause the fire or electric shock.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Make sure that the operating environment meets the requirements in the user manual.
Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.
Please do not open or disassemble the projector as this may cause electric shock. The unit should only be repaired by authorized service personnel.
Turn off the projector and unplug the power cord before you maintain, install the projector.
Remove battery/batteries from remote control before storage. If the battery/batteries are left in the remote for long periods,
they may leak.
Use a power strip and or surge protector. As power outages and brown-outs can KILL devices

Note:

Lens cap and CD UM are optional accessories depending on the region and model.
For warranty information in the Europe/Middle East/Africa region, please visit our website: https://www.optoma.com
For warranty information in the USA region, please visit our website: https://www.optoma.com/us/support/warranty-and-return-policy/

Address: Telephone:

Optoma Technology, Inc 510-897-8600
47697 Westinghouse Drive 1-888-289-6786
Fremont, CA 94539 (6am – 5pm PST)
USA
For access to the setup information, user manual, and product updates please scan the QR Code or visit the following
URL: https://www.optoma.com/support/download
www.optoma.com