LENIRE AKG K845BT, Edifier W860NB, Austrian Audio Hi-X25BT Headphones Owner’s Manual

LENIRE AKG K845BT, Edifier W860NB, Austrian Audio Hi-X25BT Headphones

Lenire Compatible Headphones

The Lenire Tinnitus Treatment Device comes with compatible headphones that are listed below: The following document provides details on the use of the compatible Headphones supplied with the Lenire Tinnitus Treatment Device.

• AKG K845BT
• Edifier W860NB
• Austrian Audio Hi-X25BT Lenire Edition

AKG K845BT

The AKG K845BT headphones have the following features:

• Micro USB Port for charging
• Charging Indicator
• Power Button
• Bluetooth Indicator
• Play/Pause & Volume Buttons (not used during treatment)

Connecting to the AKG K845BT

• Press the power button and wait for the Bluetooth Indicator to flash blue
• Hold the Controller close to the Headphones.
• When connected, the Headphones Indicator on the Controller will illuminate green.

Entering Pairing/Re-pairing mode
To disconnect bluetooth connection and enter Headphones into pairing-mode, hold the power button until the Indicator is rapidly flashing blue

Ensuring correct orientation of AKG K845BT
The left and right sides of the Headphones are marked L and R respectively on the cloth inside the foam cushions.

Charging the AKG K845BT

• Plug the charging cable into the Micro USB Port on the Headphones.
• When charging, the Charging Indicator on the Headphones will illuminate red
• Once charging is complete, the Charging Indicator on the Headphones will extinguish.

Edifier W860NB

The Edifier W860NB headphones have the following features:

• Micro USB Port for charging
• Charging Indicator
• Power Button
• Bluetooth Indicator
• Play/Pause & Volume Buttons (not used during treatment)

Connecting to the Edifier W860NB

• Press the power button for 3 seconds and wait for the LED Indicator to flash blue.
• Hold the Controller close to the Headphones
• When connected, the Headphones Indicator on the Controller will illuminate green

Entering Pairing/Re-pairing mode
To disconnect bluetooth connection and enter headphones into pairing-mode, ensure headphones are off and hold the power button until the indicator is rapidly flashing blue and red.

Ensuring correct orientation of Edifier W860NB
The left and right sides of the Headphones are marked L and R respectively on the cloth inside the foam cushions

Charging the Edifier W860NB

• Plug the charging cable into the Micro USB Port on the Headphones
• When charging, the Charging Indicator on the Headphones will illuminate red.
• Once charging is complete, the Charging Indicator on the Headphones will extinguish

Austrian Audio Hi-X25BT Lenire Edition

The Austrian Audio Hi-X25BT Lenire Edition headphones have the following features:

Note : Touch controls are disabled by default. In cases of accidental re- activation, please turn on the headphones and then hold the power button for 15 seconds to deactivate touch controls. The next time you turn on the headphone, touch control will be deactivated.

• USB-C Port
• Micro USB Port for charging
• Charging Indicator
• Bluetooth Indicator
• Play/Pause & Volume Buttons (not used during treatment)

Connecting to the Hi-X25BT

• Press the power button for 2 seconds and wait for the LED Indicator to pulse blue.
• Hold the Controller close to the Headphones.
• When connected, the Headphones Indicator on the Controller will illuminate green

Entering Pairing/Re-pairing mode
To disconnect bluetooth connection and enter headphones into pairing-mode, ensure headphones are off and hold the power button until the indicator is rapidly flashing blue

Ensuring correct orientation of Hi-X25BT
The left and right sides of the Headphones are marked L and R respectively on the cloth inside the foam cushions.

Charging the Hi-X25BT

• Plug the charging cable into the USB-C Port on the Headphones
• When charging, the Charging Indicator on the Headphones will illuminate red.
• Once charging is complete, the Charging Indicator on the Headphones will extinguish

Product Usage Instructions

To use the headphones with the Lenire Tinnitus Treatment Device, follow these steps:

1. Plug in the headphones to the audio output of the device.
2. Choose the compatible headphones from the list provided.
3. Charge the headphones using the Micro USB Port and wait for the Charging Indicator to turn off.
4. Turn on Bluetooth on the device and press the Bluetooth Indicator button on the headphones to pair them.
5. Start the treatment on the Lenire Tinnitus Treatment Device and adjust the volume as necessary using the device’s controls.
6. During treatment, the Play/Pause & Volume Buttons on the headphones are not used.

Customer Support Contact Details

If you have any questions or concerns about the product, you can contact Neuromod Devices Limited at:

• Address: Rainsford St, Dublin, D08 R2YP, Ireland.
• Email : customersupport@neuromoddevices.com
• Website : www.neuromoddevices.com

Compatible Headphones

The Lenire device is designed to work with specfic Headphones. A list of compatible Headphones that can be provided at the time of purchase by your treating clinician is outlined below

1. AKG K845BT
2. Edifier W860NB
3. Austrian Audio Hi-X25BT

Technical Support Contact Details

• E-mail : techsupport@neuromoddevices.com
• Web : www.neuromoddevices.com

Neuromod Devices Ltd., Rainsford St., Dublin, D08 R2YP, Ireland. www.neuromoddevices.com

References

• Neuromod Devices | Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>