LIVOO DOM411 Mist Fan Instruction Manual
- June 11, 2024
- Livoo
Table of Contents
LIVOO DOM411 Mist Fan
Product Information
Description
The LIVOO Mist Fan is a domestic use appliance that provides cooling by spraying a mist of water into the air. The fan has a 2.8L water tank capacity and a power input of 90W. It has three speeds and a maximum fan flow rate of 44.98 m3/min. The fan’s service value is 1.14 (m3/min)/W and its maximum air velocity is 3.08 meters/sec. The fan produces a sound power level of 59.68 dB(A) and has a seasonal electricity consumption of 12.67 kWh/a.
Technical Specifications
- Voltage: 220-240V~50Hz
- Power Input: 90W
- Water Tank Capacity: 2.8L
- Misting: 220ml/h
- Class II
Assembling
Before first use, remove all packaging including plastic bags, polystyrene, and cords to avoid any risk of accidents.
Product Usage Instructions
Safety Instructions
Please read the instructions for use carefully before the first use of the appliance to avoid any damage or harm to the user. Follow these safety instructions:
- Verify that the supply voltage indicated on the appliance corresponds to that of your electrical installation before connecting it.
- Use the appliance only for the use for which it is designed and as indicated in the instruction manual.
- Completely assemble the fan before starting it.
- Ensure that the supply cord is in good condition before each use.
- Never plunge the appliance, its supply cord, or the plug in water or any other liquid.
- Do not handle the plug on the appliance with wet hands.
- This appliance is meant for ONLY DOMESTIC USE and FOR INTERNAL USE.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Do not cover the appliance, even temporarily, because it may overheat and generate a risk of fire.
- Do not use the fan near a shower, bathtub, or swimming pool.
You have purchased a LIVOO brand product and we thank you for it. We give great attention to the design, ergonomics and ease of use of our products. We hope that this product will give you complete satisfaction.
SAFETY INSTRUCTIONS
PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE
THE FIRST USE.
A misuse of the appliance can damage it or hurt the user. Assure that you use
the appliance for the use for which it is designed, we refuse any
responsibilities as for the damages by an incorrect use or a bad manipulation.
- Before connecting your appliance, verify that the supply voltage indicated on the indicator plate of the appliance corresponds properly to that of your electrical installation.
- No responsibility may be assumed in case of damages caused by non-compliance of this manual by the user or by faulty use or handling.
- This appliance is meant for ONLY DOMESTIC USE and FOR INTERNAL USE.
- Use this appliance only as indicated in the instruction manual.
- Completely assemble the fan before starting it.
- Before each use, ensue that the supply cord is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons (*) in order to avoid a hazard.
- Never plunge the appliance, its supply cord or the plug in water or any other liquid.
- Do not handle the plug on the appliance with wet hands.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Young children, old people or disabled people must not be directly exposed to the air from the fan for long periods.
- When you disconnect the supply cord, always remove it from the plug. Do not pull on the cord itself.
- Always disconnect the appliance from its plug point when the appliance is not used, before moving it or cleaning it.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Never insert your fingers, crayons or any other object across the ventilation grills.
- Ensure that the fan is always placed on a flat surface, dry and stable.
- Do not use your fan close to a window. Rain may cause risks of electric shocks.
- Do not use chemical products or abrasive detergents for cleaning, which may easily damage or deform your appliance.
- Do not place either the fan or its parts near an over, a cooking appliance or any other source of heat.
- Do not use the appliance in the presence of explosive or inflammable vapours.
- Never try to disassemble or repair your appliance yourself. In case of repair by an unqualified person, the guarantee is cancelled.
- For reducing the risk of electric shock, never use this product with wet hands, never spill a liquid on the product or submerge it in water.
- Direct surveillance is necessary when your appliance is used near children or disabled persons.
- Do not place the appliance on or near a hot gas or in a heated oven.
- Do not use outside (For internal use only). This appliance is not suitable for industrial or open air use.
- Never leave the appliance working without surveillance.
- Avoid overheating the device by preventing the blocking of entry and exit of air. Clean all the entries and exits from time to time to remove the accumulated dust.
- Leave a safe space of 50 cm around the fan, on above and on the sides, and a safe space of 120 cm on the front.
- This appliance is not designed to be used with an external timer or a separate remote control system.
- Do not try to remove the parts and do not insert a metallic object inside the appliance.
- Unplug the appliance before filling and cleaning.
- This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments
- farm houses
- by clients in hotels, motels and other residential type environments
- bed and breakfast type environments
Authorised qualified electrician: after-sales department of the manufacturer
or the importer or any other qualified person, approved and authorised for
carrying out this kind of repair for avoiding any danger. In any case, you
must send the appliance to this electrician.
This instruction manual is available too on our website
www.livoo.fr
SPECIAL SAFETY INSTRUCTIONS
Information:
NEVER COVER THE APPLIANCE , even temporarily, because it may overheat and generate a risk of fire. Do not use the fan near a shower, bathtub or a swimming pool
DESCRIPTION
- Misting Board
- Front Grill
- Blade Lock Nut
- Blades
- Back Grill
- Grill Ring
- Grill Lock Nut
- Motor Cover
- Back Shell
- Nut
- Control Panel
- Control button
- Misting Tube
- Top Cap
- Water Tank
- Water Bracket
- Knop
- Base
- Weight Rubber
- Wheels
- Screws
- Washers
- Support Tube
TECHNICAL SPECIFICATIONS
- Voltage: 220-240V~50Hz
- Puissance: 90W
- 3 speeds
- Water tank capacity : 2,8 L
- Misting: 220ml/h.
- Class II
Description | Symbol | Value | Unit |
---|---|---|---|
Maximum fan flow rate | F | 44,98 | m3/min |
Fan power input | P | 39,60 | W |
Service value | Sv | 1,14 | (m3/min)/W |
Standby power consumption | P SB | 0,26 | W |
Off mode power consumption | P off | 0 | W |
Fan sound power level | L WA | 59,68 | dB(A) |
Maximum air velocity | C | 3,08 | meters/sec |
Seasonal electricity consumption | Q | 12,67 | kWh/a |
Measurement standard for service value | IEC 60879 : 1986 (corr.1992) | ||
Contact details for obtaining more information | DELTA BP61071 |
67452 Mundolsheim – France
ASSEMBLING
Before first use, be sure to remove all packaging. Do not leave packaging such
as plastic bags, polystyrene, cords within reach of children to avoid any risk
of accidents.
Warning : the fan can be used only if completely and correctly assembled,
i.e. with base, support and protective grill. If in doubt, have it checked by
professionally qualified personnel or ask them to assemble it.
Note : before assembling the fan, ensure that it is not plugged into the
mains. Refer to the diagrams for assembly.
-
Insert the main holder into the main body, and tight up by the nut (10).
-
Insert the 5 pieces of wheels (20) into the weight rubber (19), then tighten up by the screws (21) and the washers (22).
-
Put the back grill (5) on the motor shaft, tighten up by the grill lock up (7) to the motor cover (8).
Insert the blades (4) on the motor shaft, and tighten up the blade lock nut (3). -
Fixed the misting board (1) on the grill (2), and tight up by misting board lock screws.
-
Connect the front grill (2) and back grill (5) by grill ring (6), then tighten up by grill lock nut.
USE
Fill the water tank:
- Push the water tank upward and remove the water tank.
- Unscrew the filler cap and fill with water.
- Screw the filler cap and put the water tank back in position.
Caution:
- Make sure the product is unplugged from the mains before filling or refilling the water tank.
- Only use water in the water tank. Do not add any chemicals, oils or other additives.
- The temperature of water should not be 40°C above
PANEL CONTROL
Remote Control
-
ON/OFF Button:
- Press ON/OFF button, the indicator light is on.
- press ON/OFF button again, all stop working, all indicator lights off.
-
Speed Button : Switch ON the fan and select fan speed: Low-Medium-High.
-
Mode Button : Choose airflow: Normal – Nature – Sleep.
- Natural mode: The wind imitates the blow of natural wind based on strong and soft wind.
- Sleep mode: the unit simulates a soft breeze suitable for night time use.
- Normal mode: The wind blow based on Low/Med/High speed.
Note : The corresponding LEDs light to indicate the selected mode (nature, normal, sleep).
-
Timer Button:
Set the operating time from 30 minutes to 7h30. Each pressure represents 30 minutes.
Indicators on the control panel indicate the selected run time. -
Oscillation Button:
When fan is working, press the button to engage auto swing. It’s out of work when fan is turned off. -
Mist button :
- Mist function can be used separately, or worked together with the fan.
- Press On/off button one time to activate the fan. Press MIST button (F) to select only misting function without fan operation.
Note : While the mist function work normally, the indicator light on the body shell is blue, while the water is lacking, the indicator light is red.
-
Remote Control : is supplied with one battery inside, remove the transparent sheet from the battery cover before use the remote control.
When the battery is over, it must be replaced with the same type (CR2025) following the drawing on the back of the remote control.
CLEANING AND MAINTENANCE
- First ensure that the fan is off and remove the electric plug from the outlet.
- Do not clean until the appliance is completely cold.
- Remove the protection and the blades carefully. Do not let the blades fall!!
- First use a soft cloth with a little soap for removing stains. Then wipe with a dry cloth. Never use a corrosive liquid which would damage the paint, metal or plastic!
- Reassemble the fan after the fan parts have been dried completely. Do not connect the fan to power supply until it is fully reassembled.
- Maintenance should be done by a qualified personnel. The motor bearings have been lubricated at the factory and should not require any additional lubrication.
- Never use abrasive cleaning agents or pointy objects (for e.g. scrub brush or knife) for cleaning. Never use a corrosive liquid which would damage the paint, metal or plastic!
- Warning : Do not submerge the appliance in water or other liquids. It is a danger to life due to an electric shock.
- When the appliance is not used, store it as well as all its accessories and the instruction manual in a safe and dry place
DISPOSAL
-
Correct disposal of the unit (Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries) -
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream.
-
Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
-
The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection.
-
Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.
Photo no contractual
Worried about the quality of his products the manufacturer reserves the right
to make modifications without advance
Reference : DOM411
Version : 1.5
Language : English
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>