LogiLink POE005 Gigabit PoE+ Splitter Owner’s Manual
- June 11, 2024
- LogiLink
Table of Contents
POE005 Gigabit PoE+ Splitter
Owner’s Manual
POE005 Gigabit PoE+ Splitter
The POE005 PoE splitter is a cost effective and easy install solution for end
devices such as wireless access points, IP cameras and VoIP phones that don’t
natively support PoE, but rather require DC power input of 5V, 9V or 12V. It
receives PoE power on a network cable from a PoE switch or injector, and
splits signals into the separate Ethernet and DC power sources. One cable
provides the DC power, and the other cable provides the Ethernet signal. Users
can select from 5VDC, 9VDC and 12VDC power for their device by a selectable
switch on the device.
The PoE splitter is typically located near the end device. It has two
10/100/1000 RJ-45 ports. One port is for PoE IN, which is network connected to
a remote PoE switch or injector. The other port is for LAN OUT to provide the
Ethernet signal to the end device. The POE005 also has a Y power adapter cable
supplied for different DC interfaces required for the end device.
Features:
- Easily install non-PoE devices where a power outlet is not available
- Supports IEEE802.3af/at PD Data input Giga port
- Supports Data output Giga port
- Splits a Gigabit PoE signal into separate power and Gigabit data sources
- Set the output power to either 5V, 9V, or 12V
- Use this compact device with Logilink PoE switches or injectors
- Save on installation and equipment costs
- DC 2.1 to Micro-USB adapter included for connecting 5V powered routers and Raspberry PI
Connection – PoE Switch:
Connection – PoE Injector:
Specification:
Technical Specification|
---|---
PoE Standards| IEEE802.3af, & IEEE802.3at
PoE and Data IN| 1 x Gigabit Port, RJ45
• IEEE 802.3 / 10BASE-T
• IEEE 802.3u / 100BASE-Tx
• IEEE 802.3ab / 1000BASE-T
• IEEE 802.3af PoE / 802.3at PoE+
• Half/full-Duplex operation
• CSMA/CD
Data LAN Output| 1x Gigabit Port, RJ45
• IEEE 802.3 / 10BASE-T
• IEEE 802.3u / 100BASE-Tx
• IEEE 802.3ab / 1000BASE-T
• Half/full-Duplex operation
• CSMA/CD
DC Power Out
Switchable Output Voltage| 5V DC, 2.5A max.
9V DC, 2A max.
12V DC, 2A max.100 – 240V, 50/60 Hz
Power Adapter Cable| Included Y cable O.D.5.5mm/ID2.1mm DC plug to 2 DC plugs
with
• 2.1mm ID, 5.5mm OD
• 1.35mm ID, 3.5mm OD and one DC 2.1 to Micro USB adapter
Physical and Environment
LED Indicators| 5V/9V/12V display
Dimensions (L x W x H)| 63 x 64 x 23 mm
Weight| 65g
Power Consumption| Maximum: 27.2 Watts
Operating Temperature| 0 ~ 40°C
Storage Temperature| -40°C ~ 70°C
Operating Humidity| 10% ~ 90% RH (non-condensing)
Storage Humidity| 5% ~ 90% RH (non-condensing)
Package Contents:
- 1 x Gigabit PoE Splitter
- 1 x Y-Power adapter cable
- 1 x DC 2.1 to Micro USB adapter
- 1 x User Manual
Package Information’s:
-
Packing Dimension: 133 x 90 x 35mm
-
Packing Weight: kg
-
Carton Dimension: 557 x 370 x 200mm
-
Carton Q‘ty: 80pcs
-
Carton Weight: kg
-
The specifications and pictures are subject to change without notice.
-
All trade names referenced are the registered name work of their respective owners.
http://www.logilink.de/Suche/POE005