KOSTAL Plenticore Plus G2 User Guide
- June 11, 2024
- KOSTAL
Table of Contents
KOSTAL Plenticore Plus G2
Product Information
PLENTICORE plus G2/PLENTICORE BI G2
The PLENTICORE plus G2/PLENTICORE BI G2 are inverters designed to convert the DC electricity generated by solar panels into AC electricity that can be used to power homes and businesses. These inverters are manufactured by KOSTAL Solar Electric GmbH and come with a range of features such as approved energy meters, battery storage, country settings for commissioning, service and guarantee conditions, and certificates. The inverter can be operated in approved countries and comes with an EU declaration of conformity. The product manual and other related information can be accessed on the KOSTAL Solar Electric website under the download section.
Product Usage Instructions
Mounting the Inverter
To mount the inverter, follow the below instructions:
- Download the user manual from the KOSTAL Solar Electric website.
- Refer to the user manual for detailed instructions on how to mount the inverter.
- Use the KOSTAL Solar App for iOS or Android or watch free video tutorials on their website for additional support.
- Ensure that the inverter is mounted at a height of 100mm.
- Use 1 x per DC input for mounting.
- Use 3 x min. DIN571 A2-70 6 x 50 screws for mounting.
- Ensure that the inverter is mounted in a location with an IP65 protection rating.
Further information on the inverter, such as detailed operating instructions, approved energy meters, battery storage, country settings for commissioning, approved countries in which the inverter can be operated, service and guarantee conditions, EU declaration of conformity and certificates can be found on the Internet in the download area for your product under.
www.kostal-solar-electric.com>Download.
Danger! Risk of death due to electrical shock and discharge. Life-
threatening voltages are present in the inverter. Only a qualified electrician
may open and perform work on the
device. Always de-energize the device during installation, maintenance, and
repairs, and secure it against being switched back on. The PV
generators/cables may be live as soon
as they are exposed to light. DC cables must never be connected to or
disconnected from the device during operation, as dangerous arcs may form.
KOSTAL Solar Electric GmbH hereby declares that the inverter described in this
document complies with the basic requirements and other relevant conditions of
the directives listed below.
WARRANTY
Legal notice
KOSTAL Solar Electric GmbH Hanferstraße 6, 79108 Freiburg i. Br., Germany,
Phone +49 (0)761 477 44 – 100, www.kostal-solar-electric.com.
Exclusion of liability
All names, trademarks, product names or other designations given in this
manual may be legally protected even if these is not labeled as such (e.g.as a
trademark). KOSTAL Solar Electric GmbH accepts no liability and gives no
assurance that they can be freely used. The illustrations and texts have been
compiled with great care. However, the possibility of errors cannot be ruled
out. The compilation is made without any guarantee.
General note on gender equality
KOSTAL Solar Electric GmbH is aware of the importance of language with regard
to the equality of women and men and always makes an effort to reflect this in
the documentation. Nevertheless, for the sake of readability, we are unable to
use non-gender-specific terms throughout and use the masculine form instead.
© 2022 KOSTAL Solar Electric GmbH
All rights reserved by KOSTAL Solar Electric GmbH, including those of
reproduction by photocopy and storage in electronic media. Commercial use or
distribution of the texts, displayed models, diagrams and photographs
appearing in this product is not permitted. This manual may not be reproduced,
stored, transmitted or translated in any form or by means of any medium – in
whole or in part – without prior written permission.
Mounting inverter
FEATURES
System Overview
Connect AC
Connect the Energy meter in the grid position
https://www.kostal-solar-electric.com/released-energy-meters-hybrid
Connect LAN / WiFi communication
Connect battery communication
- Code required only for PLENTICORE plus.
- The battery only for PLENTICORE plus (optional with code PLENTICORE BI.
KOSTAL SOLAR WEBSHOP shop.kostal-solar-electric.com
To connect a battery to the DC3 input of the PLENTICORE plus, an activation code battery must be purchased.
Released batteries
https://www.kostal-solar-electric.com/plenticore_released_batteries
Close inverter
Connect DC for PV/Battery
Switch on the battery/inverter
Initial Commissioning/Operation
Login into the Webserver
KOSTAL Solar Portal registration
Activate free Smart Warranty
Contact
www.kostal-solar-electric.com/service-and-support/contact
11/2022 – MA 12156953-0001 – DOC03013376-0001 – This manual is subject to
technical changes and printing errors.
You can find current information at www.kostal-solar-electric.com. Manufacturer: KOSTAL Industrie Elektrik GmbH,
Hagen, Germany
References
- KOSTAL Solar Electric
- Home | Solar Electric
- KOSTAL contact: Available for all questions
- app
- kostal-solar-electric.com/plenticore_released_batteries
- kostal-solar-electric.com/released-energy-meters-hybrid
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>