Urgod RX-BF53A877 Wireless HDMI Transmitter and Receiver Instruction Manual

Urgod RX-BF53A877 Wireless HDMI Transmitter and Receiver

Transmitter

Receiver

Information

Generation Information

This wireless HDMI transmitter and receiver kit which applies to conference, family theater, ball games, media show, education…etc.

Function Advantages

1. 4K decoding HD high quality pictures and videos
2. Wireless, No need bluetooth.
3. Plug and play, No need any APP
4. Dual antenna, support 5G high speed. long signal range up to 98ft / 30M away.
5. Transmits through walls, floors & ceilings
6. The receiver has HDMI , VGA ,Audio ports. can support external audio.
7. You only need to connect with the receiver directly if you use your phone .
8. Portable , easy to take while on business.

Package include

1. Transmitter * 1
2. Receiver * 1
3. HDMI cable *1
4. Type-c cables *2
5. Manual book * 1

How to connect with the transmitter and receiver kit for laptop?

Attention;
Before connect please make sure the steps as below;

1. Please prepare the adapters both for transmitter and receiver.
2. Please make sure turn on the power button on receiver’s side.

After connect the transmitter and receiver, you don’t need do anything, just wait about 13 seconds to connect automatically.

How to repairing?

If you can’t connect successfully, Please do it as below;

1. Unplug the transmitter
2. Insert the thimble into the bottom of the receiver “RESET” position for 5 seconds, and it will enter to the pairing mode.
3. Plug in again the transmitter.
4. Press the button of the transmitter about 5 seconds, the light status become fast flashing to be pairing with the receiver.
5. When you see the screen shows” Pairing” just kindly wait for 20s to be connected between the transmitter and receiver.
   

How to connect with your iOS phone / pad ?

iOS system;

1. Connect the receiver with your TV. please use the power adapter to charge for the receiver, please do not charge by the usb port. make sure turn on the power button on the receiver side.
2. Find the “settings” on your phone home page
3. Click the “WLAN”
4. Connect the wifi of the receiver ” RX-BF53A877″
5. Enter the password : “12345678”
6. On the TV screen will show you phone connected .
7. Back to your phone home page, Open the safari browser.
8. Enter the IP address: 192.168.203.1 then on the left side you can change the language you need.
9. Back to your phone home page. Slide the screen bottom, then find the “Screen Mirroring.”
10. You can also find our listing page on Amazon about the Q & A parts, you can find the video that how to connect with your phone.

Android system;

1. Open phone settings: All sharecast / Smart View / Multi-screen / Mirorring ……
2. Search RX-XXXX device and connect.
   Different brand mobile phone/tablet wireless projection function setting path :
   Huawei: Drop-down menu-Multi-screen
   Xiaomi: Set up-Connect and share-Cast Samsung: Drop-down menu- Smart View…….

How to connect Android phone/pad with receiver ?

Steps:

1. Please connect the power adapter for the receiver. please do not charge by the usb port.
2. Turn on the power button on the receiver side.
3. Take out the phone/pad and find the “settings” .
4. Click on all shares, and then click on the smart view,
5. After that click on the multiple screens, and then click on mirroring.
6. Search RX-XXXX device what the name displayed on the TV screen and connect it.

Attention:
Different brands of mobile phones/pads have different setting paths :

1. Huawei: Drop-down menu-Multi-screen
2. Xiaomi: Set up-Connect and share-Cast
3. Samsung: Drop-down menu- Smart View…

How to connect laptop/PC to Multiple displays?

Attention:

1. Please make sure charge for transmitter and receiver all the way by the power adapter, please do not charge directly by the usb port.
2. Please turn on the power butter on the receiver side.
3. It can support multiple 6 displays by the splitter (we do not offer)
4. Please don’t do anything after you connect the transmitter and receiver, just wait about 13 seconds to connect automatically .

There are 4 kinds of connections;

1. One transmitter + One receiver
2. Multiple up to 4 transmitters + one receiver
3. One receiver (for phone or pad)
4. Transmitter + receiver + splitter (we dont offer)+ multiple displays

Attention

1. please use the 5V/2A power adapters both for the transmitter and receiver (we do not offer the adpaters,as we sell our product to many countries, different country use different adapters).
2. please turn on the power button at the receiver’s side ( which has the antenna one is receiver)
3. please don’t charge directly by the usb port for transmitter and receiver.
4. please don’t set sleep black screen while using the laptop.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>