Techage 202212 Xmeye WiFi Camera System User Manual
- June 12, 2024
- Techage
Table of Contents
WiFi NVR
User Manual
Security Expert for Your Home and Business
http://d.xmeye.net/XMEye
XMEye Pro App
Preface
Thanks for purchasing our WiFi Network Video Recorder Surveillance products. This user manual is for 8CH Xmeye WiFi NVR. This WiFi NVR supports Onvif protocol, so you can add WiFi cameras from other brands which also support Onvif protocol.
NVR Overview
IR: To receive infrared remote control signal.
PWR: It will be on when the NVR is plugged in power adapter (12V2.5A-
12V3A).
REC: It will be on when the NVR set up recording.
ALARM: It will be on when the NVR received alarm attention.
Directions: Choose different options on NVR, left or right, up or down.
BACK: Back to previous step.
NEXT: Go to next step.
MENU: Enter main menu directly.
ESC: Leave the current option/window, cancel or back to previous option.
DC12V: For power supply DC 12V, the size of the DC plug is 5.5*2.1mm.
USB: For USB mouse to control NVR or USB disk to backup video.
WAN: Ethernet port for connecting to the router.
HD-PORT: For connecting the monitor or display with HDMI cable.
VGA: For connecting the monitor or display with VGA cable.
AUDIO OUT: For connecting speakers to play the recorded audio.
Connect your System
Step 1: Power on the cameras with power adapter.
Step 2: Power on the NVR with its power adapter (12V2.5A).
Step 3: Make sure your network is 2.4GHz and WiFi signal is good.
Step 4: Connect the NVR to your router by LAN cable (Cable length within 20
meters).
Step 5: Connect the cameras to your router by WiFi signal.
Step 6: Connect the NVR to monitor by VGA or HDMI cable.
Notice: Please make sure the cameras and the NVR are connected to the
same router.
Cameras Installations
When you install the cameras, please make sure to avoid the inaccurate ways of
installations.
Wrong Viewing Angles
Right Way: Adjust the directions of the camera lens and make sure the lens of
the camera are away from the wall.
Close Object Reflects
Right Way: Move the objects away from the camera lens or change the camera’s
installation position.
Close Wire Cable Reflects
Right Way: Move the power cable or Ethernet cable away from the camera lens
and fix it on the back of the camera.
NVR Installation
1.1 Hard Disk Installation
Please install the hard disk first. If not, the video recorder can only monitor
normally, but cannot record or playback.
Notice: Please choose a specialized monitoring hard drive disk in order
to record for a longer time. The video recorder supports 3.5″ or 2.5″ SATA
hard disk.
Warning: please make sure the power is off before installation.
1.2 Boot & Preview
Make sure the power supply matches the requirements of the hard disk video
recorder.
After connecting the power, the indicator on the front of the NVR will light
on and you will hear a buzzer sound, then the display will boot up and the
device will access to the preview image. After the recovery of the non-normal
power failure, the device will automatically return to the state it was in
before the power outage.
Function Setting
2.1 Login System
The current factory default user password is displayed in clear text. For
safety, please modify it as soon as possible.
Then please draw the unlock pattern to set up your new password.
2.2 HDD Setup
Right click the mouse→【Main Menu】→【Advanced】→【HDD Info】
Choosing the Hard Disk, clicking Format Storage, starting to format the HDD.
Notice: Please confirm the hard disk is connected. The hard disk should be
formatted before first use, so that it can record properly. It will
automatically overwrite previous videos when the storage of hard disk is full
if you set overwrite.
2.3 General
Right click the mouse→【Main Menu】→【System】→【General】
[Language] You can set the system language to the native language.
[Storage Full]
Choose Overwrite: Keep recording video and automatically overwrite the former
video while the storage of HDD is full.
Choose Stop: Stop recording video while the storage of HDD is full.
[Auto Logout] You can set up a 0-60 min auto standby. 0 min means you haven’t
set up the standby time.
[Startup Wizard] Tick it to get startup wizard when reboot the system (untick
it as default).
2.4 Record Setup
In the Record Configuration, you can set up the record mode for each channel to
save space of the HDD and only record the important videos.
Right click the mouse→【Main Menu】→【Record Conf.】
[Channel] The channel which you want to do settings of record
configuration.
[Length] The standard length of each video segment.
[Mode] The way you want to record videos.
Schedule: The selected channel will only record during the chosen time period.
Regular: The system will keep recording during the chosen time period.
Detect: The system will record a video segment when the camera detects
movements during the chosen time period.
Alarm: The system will record a video segment when the camera alarms during
the chosen time period.
Manual: The selected channel will record 24/7.
Stop: The selected channel will not record any video.
Notice: If you would like to set the recording mode to “Alarm”, please
make sure that you have enabled the alarm function of the corresponding
channel.
2.5 Video Playback
Right click the mouse→【Main Menu】→【PlayBack】
In the “Common Playback”, you can playback recorded video according to date, time, channel and mode.
- Choose Play Mode
- Choose Video Date
- Playback Channel Option
- Video Playback Time
- Playback Control Key
| Start Playback | Play Backward |
|---|---|
| Stop Playing | Slow Playback |
| Rewind/Fast-forward | Prev/Next Frame |
| Prev/ Next File | Repeat Playback |
| Full Screen | Start Editing |
Click the “Smart Express”, you can choose different alarm type files for
fast playback.
Click the “Smart Search”, all recorded videos, which detected motions or
humans will be displayed.
Click the “Face Search”, all recorded videos, which detected human faces
will be displayed.
2.6 Video Backup
Right click the mouse→【Main Menu】→【System】→【Backup】
Choose 【Video Type】→【Channel】→【Time】, clicking Add button to search video file,
choosing the file in the list, clicking Start button to backup and it will
automatically prompt after backup completed.
Notice: USB disk must be FAT32 format. Please choose AVI format while
backup, so that the backup video could be played on PC directly.
2.7 Snapshot Configuration
Right click the mouse→【Main Menu】→【System】→【SnapShot Conf.】
[Cycle capture] The camera will take snapshots periodically when you
choose Cycle capture. For example, if the default snapshot period is 64
seconds, it means the camera will automatically take snapshot every 64
seconds.
[EMAIL] Tick it and the NVR will send the snapshots captured by the
cameras to your e-mail address.
[FTP] Tick it to enable this function. Buyers need to build their own ftp
service by themselves.
[storage] Tick it and the NVR will store the snapshots captured by the
cameras in the HDD.
[Timing capture] The camera will take snapshots at the time that you set
when you choose Timing capture.
[DHCP Enable] Tick it to automatically obtain the lP address assigned by
the server.
[IP Address] It has to be a unique IP address on the same LAN segment to
avoid conflicts with other equipment in local area.
[HTTP Port] A port number for remote visit, default value is 80.
[NetService] Here you can enable functions like RTSP, FTP, Email and
other services.
[Wireless Channels] The channel number about NVR.
2.9 Check Nat Status
Right click the mouse→【Main Menu】→【Advanced】→【Version】
[Serial Number] Device Serial Number for remote view.
[Nat Status] Check the network status, begin a remote monitoring when
shows connected.
[Device Info] Edit function like playback preview, face and human
detection.
2.10 Email Setup
Right click the mouse→【Main Menu】→【Network】→【NetService】→【EMAIL】
[SMTP Server] Sender’s mailbox (for example: gmail / email).
[Port] Sender’s mailbox SMTP port.
[Encryption] SSL.
[User Name] Username of the sender’s mailbox (must support and open SMTP
function).
[Receiver] Receiver’s mailbox.
[Password] Password of the sender’s mailbox. Go to get 16-digit app
password on your email setting.
[Mail Testing] Click and it will send an email to receiver to test the
Email setting.
Notice: Before testing the Email, please confirm the Network has been
connected successfully.
- How To Get 16-Digit App Password
Enable IMAP access of your e-mail.
Log in your Google account. In “Security” section, find “Signing in to Google”. If the “2-Step Verification” is off, please enable it.
You will get a 16 digits password that you need to use later to set up your email notice in NVR system.
You will get a 16 digits password that you need to use later to set up your e-mail notice in NVR system.
Notice: You are not able to review the password after you click “DONE” so
please write it down or leave this page open.
2.11 User Management
Right click the mouse→【Main Menu】→【System】→【Account】
[Modify Pwd] Enter to Modify Password page, and modify password.
[Add User] Add User account and set up the User’s permissions. Enter the
Add User page and input the User Name and Password.
Notice: Password can be setup as number+letter combination, please record
your password in other ways and keep it in a safe place to avoid forgetting.
2.12 Alarm
Right click the mouse→【Main Menu】→【Alarm】
Notice: The NVR supports intelligent alerts, such as motion, human and
face detection.
You can set different intelligent alerts if your cameras also support these
functions through the following operations.
2.12.1 Intelligent Alert Setting
Right click the mouse→【Main Menu】→【Alarm】→【Intelligent Alert】
[Channel] Choose the camera which you want to do alert settings.
[Enable] When it is unticked, the camera will not detect any movements.
[Human Detect] The camera will detect all movement like human, car,
animals and other objects.
[Record] When it is ticked on, the camera will record a video segment
when human/face detected.
[Mobile reported] When it is ticked on, the camera will send alert
notifications to your
mobile App when it detects movements or human activities.
[Alarm Sound] When it is ticked on, the camera will make a voice alarm
when it detects movements or human activities.
[Sensitivity] Adjust the detection sensitivity of the camera.
[Rule]Set advanced detection rules like safe zone or line cross alarm.
Notice: We recommend you to active “Human Detect” to reduce false alerts.
It shows that “Human Detect” function can reduce 98%-99% of the false alerts.
2.12.2 Advanced Setting of Human Detection/Face Detection
Right click the mouse→【Main Menu】→【Alarm】→【Intelligent Alert】→【Human
Detect】/【Face detection】→【Advanced】, click Set button.
[Period] The time period of the detection.
[MD Interval] The interval between 2 human motion movements alerts.
[PostRec] To adjust the length of the video after the camera detects
abnormal movements.
[Tour] Not applicable.
[Snapshot] When it is ticked on, the camera will take snapshots when it
detects abnormal movements.
[Send Email] When it is ticked on, the camera will send alerts to your
e-mail address when it detects abnormal movements.
[Write Log] When it is ticked on, the NVR will mark down the alarm
record. You can review the records by following this path: Right click the
mouse→【Main Menu】→【Advanced】→【Log】.
[FTP upload] Not applicable.
[Alarm] Shutdown: It means to turn off all alarm sounds.
Voice Prompts: You can select to turn on different alarm sounds.
If you have set the function of face detection, on screen of the monitor with
live video, you can view the human faces detected by the cameras. You can
easily and quickly get whether the persons detected by the camera are your
friends or intruders. If he is an intruder, the face detection function can
help take some actions as soon as possible to protect your safety and
property.
When the cameras detect human faces, the NVR will show you these faces on the
right side of the screen like the image above.
2.12.3 Advanced Settings of Safe Zone & Line Cross Alarm
You can set up a safe zone for camera. The camera will only detect or make
alarm sound when there are abnormal activities in the safe zone.
Right click the mouse→【Main Menu】→【Alarm】→【Intelligent Alert】→【Rule Set】
Choose the safe zone shape which you would like to use. In this user manual, we use rectangle as example.
Click & hold the sides of the different patterns then drag the sides to change the shape and the size of the safe zone.
You can also choose other size such as circle to protect our valuable objects.
When you choose “Tripwire” in stead of “Intrusion”, there will be a line on the screen and the camera will only detect or make alarm sound when people cross this line.
2.12.4 Abnormality Settings
Right click the mouse→【Main Menu】→【Alarm】→【Abnormality】, in this part, you can
set the alarm for other events.
In the 【Event Type】, there are several options:
[No Storage] The NVR can’t detect HDD.
[Storage Device Error] The NVR detects that the HDD is not working
correctly.
[Storage No Space] The HDD is full.
[Net Disconnection] The NVR is disconnected to the Internet.
[IP Conflict] There are other devices in the LAN using the same IP address
as this NVR.
You can also choose different notification types:
[Show Message] The error message will show on the monitor screen.
[Alarm] Shutdown: It means to turn off all alarm sounds.
Voice Prompts: You can select to turn on different alarm sounds.
[Mobile reported] The NVR will send error message to the App.
[Send Email] The NVR will send error message to your e-mail address.
2.12.5 Traditional Alarm Setting
Right click the mouse→【Main Menu】→【Alarm】→【Traditional alarm】, in this part,
you can adjust the settings for other alarm types.
[Video Blind] The camera is covered and blinded.
[Video Loss] The camera loses connection with the NVR.
[Alarm Input] The alarm input from the cameras.
[Intelligent] Not applicable.
Add WiFi Camera
This NVR supports Onvif protocol, it means that the recorder is compatible with all the WiFi cameras which support Onvif protocol. And it supports max 5mp resolution. You can add 8 pcs WiFi camera to this NVR in total. If you want to connect more cameras to the recorder, please pair the recorder and cameras first. Right click the mouse→【Main Menu】→【Channel Set】
Click “Search” and the cameras will be able to be chosen on the upper chart.
Click “Add” then the camera will be paired with the NVR.
Quick Pair: This way only work with WiFi camera which belongs to same system.
Long press reset button to reboot the camera in order to complete the
operation mode.
Notice: This system supports 2.4GHz only.
Remote View
Right click the mouse→【Main Menu】→【Advanced】→【Version】
Serial Number: Enter device Serial Number
Username: Default user name is armn.If you have changed user name before
please enter the one you set.
Password: Enter the password you have changed on login system.
4.1 Remote View via PC
Open the Google Browser, enter website: https://www.xmeye.net, arrive at
browsing page of remote view, choose “By Device”. Then enter Serial No., User
name, Password and Verify to realize remote view.
4.2 Remote View via PC Client Software
Download Center:
https://www.securityaicamera.com/Software-a640163.html
Open VMS PC client software after installation.
Click [Device Manager] and choose [Add devices automatically] to add the device.
Live view via VMS.
4.3 Remote View Via Smart Phone
① Install the software: scan the QR code or search XMEye Pro in App store to
download.
When turn on NVR for the first time→【Camera Test】→【Time Setup Wizard】→【Network】
Serial Number: Enter device Serial Number
Username: Default user name is armn.If you have changed user name before
please enter the one you set.
Password: Enter the password you have changed on login system.
②Install successfully, register user, add device and begin a remote view.
Step 1:
Tap register and input your Username, Password to create a new account.
Step 2:
Click “+” to add devices: input Serial No., username and password .
Step 3:
After device added, click it to link the sever.
Step 4:
Connect successfully and start to view video.
All rights reserved. No part of this publication may be reproduced by any
means without written permission from our company. The information in this
publication is believed to be accurate in all respects.
Our company will not assume responsibility for any consequences resulting from
the use thereof. The information contained herein is subject to change without
notice. Revisions or new editions to this publication may be issued to
incorporate such changes.
V202212
Documents / Resources
|
Techage 202212 Xmeye WiFi Camera
System
[pdf] User Manual
202212 Xmeye WiFi Camera System, 202212, Xmeye WiFi Camera System, WiFi Camera
System, Camera System
---|---