aiwa RS-X100 Natsukasii Pro High Fidelity Bluetooth User Manual
- June 11, 2024
- Aiwa
Table of Contents
aiwa RS-X100 Natsukasii Pro High Fidelity Bluetooth
Important Safety Instructions
- Please do not place the device near any form of heat source.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to qualified personnel should there by any form of damage to the device.
- Keep this user manual for future referencing/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep the device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose the device to excessive heat (Direct sunlight etc.).
- Do NOT immerse the device in any form of liquids.
Unboxing
- RS-Xl00 Natsukasii Pro
- Type-C Charging Cable
- 3.5 mm dual terminal audio line
- Handle
- User Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
- Model Number: RS-Xl00 Natsukasii Pro
- BT Version: vs.a
- Power Output: 40W
- Driver: 4 inch’!+ 2 inch”2
- Frequency Response: 120Hz – 20KHz
- Decoding: MC, SBC
- S/N Ratio: 60dB
- Supported Profiles: MP3, WMA, WAY, FLAC
- Transmission Distance (Estimated): 10 Meters (No Obstacles)
- DC Input Voltage/Current: DC SV/2A (Type-CJ
- Battery: 4000mAh (Li-on)
- Playback Time: 8-9 Hours (50% Volume); 2-3 Hours D00% Volume)
- Charging Time: 6-7 Hours
- Dimensions: 252xl60xl42 mm
The above playback & charging times are estimated values tested in a practical environment and may vary on individual usage habits.
Product Overview
Functions:
Bluetooth, USB, TF, AUX IN, TWS, DSP, Phone call, Power display
- Lever-type power switch
- Previous track
- Play/ Pause. Long press to toggle between USB/TF/AUX IN modes. Short press to answer a phone call.
- Next track/Disconnect BT (Press and hold)
- Treble control knob
- Bass control knob
- Volume control knob
- Function LED indicator light
- Battery display
- Mic
- Charge LED indicator light
- USB Type-C (DC IN 5V} Charging port
- USB ports
- AUX IN input port
- TF ports
Bluetooth Operation
- Turn on the speaker & enter Bluetooth mode. (The LED indicator lights will flash rapidly + to Start up the sound prompt).
- Turn on Bluetooth on your device & connect to “AIWA Natsukasii 700”
- Music playback can be commenced via the play/pause button after a successful connection. (LED indicator light remains lit)
- Adjust the volume via the corresponding control knobs.
- Switch between USB /TF/AUX playback mode via the “M” button. (Long press the “M” button).
TWS operation
- Two speakers (RS-Xl00 Natsukasii Pro or RS-Xl50 Natsukasii Pro) is required.
- Turn on both speakers at the same time & long press the “lk)::1 “key on one of the speakers for three (3) seconds to commence the TWS connection. (A connection sound prompt will be played upon successful TWS connection)
- Turn on a Bluetooth-enabled playback device and pair it with the corresponding speaker unit.
- Exit TWS pairing: Long press key
- Switch between USB/TF/AUX IN playback modes by long pressing the “M” button.
USB, TF operation
- Inserting a USB / TF CARD will switch the playback mode automatically.
- Select the desired music track via the Next Previous track buttons.
- Switch between USB/TF/AUX IN playback modes by long pressing the “M” button.
AUX-in operation
- Connect the music source device to the speaker via the 3.5mm AUX cable.
- Switch between USB/TF/AUX IN playback modes by long pressing the “M” button.
Phone call operation
- Short press the Play/Pause button to answer/end a call.
- Long press to reject an incoming call
AIWA Electronics International Co., Ltd. Explore more at www.int- aiwa.com.
Mandcops AG
Bahnhofstrasse 17 96106 Ebern Germany.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>