xiaomi WCJ05ZM 50W Wireless Car Charger User Manual
- June 11, 2024
- Xiaomi
Table of Contents
Xiaomi 50W Wireless Car Charger User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
The Xiaomi 50W Wireless Car Charger (hereinafter referred to as the “wireless car charger”) is a wireless charging product for in-car use. It features auto- clamping and two-way grip. The wireless car charger is covered in PU leather, has a Type-C port, supports clamp release when power-off, and can be used with one hand for easy operation.
1-Universal Ball Knob
2-Clamp Release Button
3-Clamp Arms
4-Welcome Light
5-Wireless Charging Indicator
6-Universal Ball
7-Knob
8-Vent Mount 1
9-Adhesive Mount
10- Vent Mount 2
How to Use
1. Unscrew the universal ball knob on the back of the wireless car charger and put it into vent mount 1 or vent mount 2. Insert the universal ball into the round hole on the back of the wireless car charger and tighten the universal ball knob.
Vent Mount 1 Vent Mount 2
2. Tighten the knob on the vent mount 1 or vent mount 2 to fix the wireless car charger to the vent, then plug the supplied car charger* into the car’s cigarette lighter or power port and connect the supplied USB charging cable to the Type-C charging ports on the wireless car charger and the car charger. When the wireless charging indicator blinks blue three times, and the welcome light remains on, the wireless car charger is functioning normally.
- Welcome Light
- Car Charger
- Wireless Charging Indicator
*When using the car charger to charge the device via the Type-C port, the indicator will display green, blue, or gold according to the device’s poweraccording to the device’s power level from low to high. (When using the supplied car charger and the wireless car charger together, the indicator will be gold by default.)
3. Make sure there are no metal objects on the surface of the wireless car charger or on the back of the compatible phone which meet the Qi standard. Move the phone close to the wireless car charger’s charging surface, and the charger’s clamp arms will open then close automatically to secure the phone in place. The wireless charging indicator will be blue while charging normally.
4. In order to achieve a better charging performance, make sure the phone is properly placed onto the wireless car charger, so it is close to the charging surface (refer to the figure below). When the wireless charging indicator blinks, it indicates that the wireless car charger is in protection mode. Please check whether there is a metal object on the charging surface or on the back of the phone. If the issue persists, please contact the after-sales service team*.
CAUTION: When installing the wireless car charger, it is recommended to tilt it at a certain angle as shown to prevent accidentally touching the clamp release button when using the phone and causing the clamp arms to open and drop the phone.
*When a phone that does not support wireless charging is placed onto the wireless car charger, the indicator will blink.
5. When you need to remove the phone from the wireless car charger, gently press the clamp release button. The clamp will open to release the phone, and wireless charging will stop after the phone is removed.
6. If neither vent mount 1 nor vent mount 2 can be attached to the vent, the adhesive mount can be used to secure the wireless car charger to the car.
CAUTION: The surface for mounting the wireless car charger needs to be clean and flat. Continue to apply pressure for 5–10 seconds after fixing to the surface and it will be most securely attached after 24 hours. Due to the strength of the adhesive, forced removal may damage the car’s interior. It is recommended to have a professional remove the adhesive base.
Precaution
- When using the product to wirelessly charge a device, make sure the wireless charging surface is clean and free from debris. If the device to be charged has a protective case, make sure the case is non-metallic and has a thickness of 4 mm or less.
- Do not place any cards with a magnetic strip or chip (such as an ID or bank card) near or on the charging surface, so as to avoid corrupting the card.
- Keep a distance of at least 20 cm between implanted medical devices (pacemakers, cochlear implants, etc.) and the product so as to avoid potential interference with the medical devices.
- If the product (including any accessories, if any) will not be used for an extended period of time, please disconnect it from the power.
- The adhesive on the bottom of the adhesive mount is suitable for one use only to avoid it being weakened and affecting use. The surface for mounting the wireless car charger needs to be clean and flat. Due to the strength of the adhesive, forced removal may damage the car’s interior. It is recommended to have a professional remove the adhesive base.
- The clamp arms on the wireless car charger are activated by a motion sensor. When there is no phone on the charging surface, it is normal for moving objects to cause the clamp arms to open.
- When the product is charging, do not connect any other device to the charging cable.
- When a phone is charging, it can use Bluetooth for more stable charging. It is recommended to enable Bluetooth on your phone when charging.
Specifications
Name: Xiaomi 50W Wireless Car Charger
Model: WCJ05ZM
Input: 12 V–20 V 3.25 A Max.
Wireless Charging Distance: ≤ 4 mm
Item Dimensions: 122.2 × 72.9 × 55.2 mm
Output: 50 W Max.
Operating Temperature: 0 °C to 30 °C
Operation Frequency: 115–148 kHz（＜29.9 dBuA/m @ 10 m）
Car Charger Model: WCJ05CCZM
Input: 12 V 8.5 A(Type-C) 11 V 6.1 A Max. 20 V 3.35 A Max.
Output: (USB-A) 5 V 3 A Max. 9 V 2 A Max.
(Dual-port) USB-A: 10 W Max.
USB-A port only supports 5 V/2 A in dual-port output mode.
To achieve 50 W wireless output, a Xiaomi phone that supports 50 W wireless input must be used along with the supplied USB charging cable and car charger.
Warning
- Do not use this product in severely hot, humid, or corrosive environments so as to avoid damage to its electrical circuit.
- Do not press or strike the product, avoid severe dropping or strong vibration, and prevent liquid from seeping or splashing into the product, which may cause a short circuit or damage to the electrical circuit. If this happens, please stop using it immediately and dispose of it properly.
- Do not disassemble or modify the product.
- Do not dismantle, crush, puncture, or short circuit the product or expose it to liquids, fire, heat sources such as stoves and heaters, or an environment with an ambient temperature higher than 60 °C (140 °F).
- Keep away from electromagnetic radiation sources.
- Do not place the product in a high temperature, low temperature or humid environment, or place in direct sunlight.
- This product is not a toy. Keep it out of reach of children, in order to avoid accidents.
EU Declaration of Conformity
The manufacturer hereby, declares that this equipment is in compliance with
the applicable Directives and European Norms, and amendments. The full text of
the EU declaration of conformity is available at the following internet
address:
http://www.mi.com/global/service/support/declaration.html
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
UK declaration of conformity
We Zimi
Corporation hereby, declares that this equipment is in compliance with the
applicable Legislation. The full text of the UK declaration of conformity is
available at the following internet address:
https://www.mi.com/uk/service/support/declaration.html
FCC Statement
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This device complies with part 18 of the FCC Rules.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device
Manufactured for: Xiaomi Communications Co., Ltd.
Address: A913, No. 159 Cheng Jiang Road, Jiangyin, Jiangsu, China
For further information, please go to www.mi.com
Manufactured by: Zimi Corporation
User Manual Version: V1.0