SODACODA AG130 Smart Sensor Car Wireless Charger Instructions

AG130 Smart Sensor
Car Wireless Charger
Instructions

MANUAL: AG130 PHONE HOLDER CAR

Thank you for purchasing the AG130 Car wireless Charger. In order to use this product correctly, please read this manual before use; in order to read the manual at any time when you need it, please keep this manual in a safe place.
About this manual:
The product pictures and related product features shown in this manual, as well as some nouns, can only be used as a reference. The user will use the actual product as the standard, and the referenced data comes from the company’s laboratory.
WARNING
Incorrect actions can lead to personal injury. Incorrect operation can result in personal safety or property damage
Specifications:
Power: 15W, 10W, 7.5W, 5W Effective transmission distance: 1-8cm
Size: Middle disk diameter: 12.3cmx7.3cmx1.7cm
Charging interface: USB
Charging power: 110K-205K Hz
Charging distance: 0-8mm Material: PC + ABS Vacuum Plating Weight: 130 gram
What’s in the box:

• 1 x Phone Holder (consist of two parts: the bracket and connection part for vent)
• 1 x Manual
• 1 x USB-Cable
• 1 x Car outlet base(clip)x1
• 3 x Magnetic head (Iphone, type-C, Android )

FUNCTIONAL COMPONENTS

INSTRUCTIONS FOR USE

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
2. Connect the USB port of the data cable to the charging interface on the car (eg, cigarette lighter switching charger and USB charging pod on the car
3. The device clip clips the air outlet and can also be placed elsewhere
4. After the device is powered on 5V-9V DC power supply, it will automatically check the tension and the blue indicator light will be on. When the object is close to the device 5cm-20cm, the automatic induction will open the arms and put the phone into the phone, the device will automatically clamp the phone.
5. At this point, wireless charging will automatically charge the phone, charging green light (mobile phone with wireless charging function) This only happens if your phone supports wireless charging and is not equipped with accessories. See the “two ways to charge” heading below for more information.
6. When you remove the phone you need to touch the back of the shell at the top of the sensing point, when the hand touches the sensing point position, the device automatically open arms, remove the phone.

Two ways to charge:

1. New phones can be connected directly.
   Note: A phone case or other accessories may prevent the phone from charging. Please remove if the charger does not work.

2. Older phones that don’t support wireless charging: use 1 of the 3 charge plugs/magnetic heads.

This device has over-voltage protection, over-temperature protection, magnetic field protection, short-circuit protection. If the device is working abnormal, it will automatically stop working.!

SAFETY PRECAUTIONS

Be sure to read the safety precautions before use. Please use this product correctly according to the contents and recommendations of the manual. the product should be cleaned in time after use to avoid accumulation of grease and its residues.

• Do not over-squeeze or hit the device.
• Do not use the wireless charger under severe high temperature, humidity or corrosive environment to avoid damaging the device’s circuit.
• USB power supply needs to be connected to qc3.0 vehicle charging head.

©AG Store Bovendijk 203
3045PD Rotterdam
The Netherlands
www.agstore.nl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>