Chicco Goody Plus/Pro Auto Fold Compact Stroller User Manual

: June 11, 2024
: chicco

Table of Contents

CLEANING
MAINTENANCE
GENERAL INSTRUCTIONS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Chicco Goody Plus/Pro Auto Fold Compact Stroller User Manual

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

WARNING: BEFORE USE, REMOVEAND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN

WARNINGS

WARNING: Never leave the child unattended.
WARNING: Ensure that all the locking devices are engaged before use.
WARNING: To avoid injury ensure that the child is kept away when unfolding and folding this product.
WARNING: Do not let the child play with this product.
WARNING: Always use the restraint system.
The use of the crotch strap and safety harness is necessary to guarantee the safety of your child. Always use the safety harness together with the crotch strap.
WARNING: Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
WARNING: This product is not suitable for running or skating.
The vehicle is suitable for children up to 22 kg or 4 years, or whichever limit is reached first.
It is recommended that the backrest should be used in its most reclined position for children from birth to 6 months of age.
Only CHICCO KAILY or CHICCO KIROS I-SIZE/CHICCO KIROS EVO I-SIZE car seats with FAST IN attachment, or the CHICCO SOFT CARRYCOT, can be attached to the GOODY PRO stroller.
With the carrycot installed on the stroller; WARNING: This product in pram configuration is only suitable for children who cannot sit up unaided, roll over and cannot push up on their hands and knees. . Maximum weight of the child: 9 Kg. Do not add another mattress on the upper part of the mattress supplied or recommended by the manufacturer. Do not leave the transport handles inside the carrycot.
The brake must always be engaged when positioning or removing your child from the stroller.
Use the brake every time you stop.
Never leave the stroller on a sloped surface, with a child on board, even when the brakes are on.
Do not overload the storage basket. Maximum weight 3 kg.
Any weight attached to the handles and/or backrest and/or on the sides of the stroller may effect the stability of the stroller.
Do not transport more than one child at a time.
Do not use accessories, replacement parts, or any component not supplied or approved by the manufacturer / distributor.
Do not use this product if any part is broken, torn or missing.
This configuration should not be used as a replacement for a cot or bed. Should your child need to sleep, then they should be placed in a suitable pram body, cot or bed.
Before assembling, ensure that the product and its components have not been damaged during transportation. In this case, do not use and keep out of reach of children.
During adjustment operations, ensure that the moving parts of the stroller do not come into contact with your child.
Make sure that the person using the stroller knows how to operate it in the safest way.
This product must only be used by an adult.
The product must only be assembled by an adult.
To avoid all strangulation hazards, never give children objects with cords or strings attached, or leave them close to such objects.
Never use the stroller on staircases or escalators: you could suddenly lose control of it.
Always pay attention when going up and down steps or pavements.
If the stroller is left exposed to direct sunlight for an extended period of time, allow it to cool down before placing your child inside. Prolonged exposure to direct sunlight may cause the colour of the materials and fabric to fade.
Prevent the stroller from coming into contact with salt water. It may cause rusting.
Do not use the stroller on the beach.
When not in use, the stroller should be kept out of reach of children.

TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance. Cleaning and maintenance should only be carried out by an adult.

CLEANING

The seat of the stroller can be removed (please see the section FITTING AND REMOVING THE STROLLER LINING) , and the reducer cushion is removable as well. Clean the fabric parts using a wet terrycloth and neutral soap. Periodically wipe the plastic parts clean with a soft damp cloth. To prevent the formation of rust, always dry metal parts if they have come into contact with water.

The washing symbols and relative meanings are indicated below:

Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

MAINTENANCE

If necessary, lubricate the moving parts with dry silicone lubricant. Regularly check the condition of the wheels and clean off all dust and sand. To avoid friction that may compromise the correct functioning of the stroller, make sure all plastic parts that run along the metal tubes are clean of dust, dirt and sand. Keep the stroller in a dry place.

GENERAL INSTRUCTIONS

OPENING THE STROLLER AND FIRST ASSEMBLY

WARNING: When opening the stroller, make sure that your child or other children are at a safety distance.
WARNING: Make sure that during these operations the moving parts of the stroller do not come into contact with your child.
1. Grip the handle (Fig. 1) and pull upwards (Fig. 1A) until the
structure opens fully (Fig. 1B).
WARNING: Before use, ensure that the stroller is locked in the open position, checking that the mechanism is effectively locked.
Assemble the rear wheels by inserting the pin of the wheel into the appropriate hole located on the rear tube, until it locks in place (Fig. 2). To remove them, use the button located on each wheel (Fig. 2A).
WARNING: Before use, ensure that the wheels have locked correctly.
Install the bumper bar by inserting it into the appropriate slots located on the joints of the stroller (Fig. 3). Should you need to remove it, press the buttons on both sides (Fig. 3A).
WARNING: Never use the bumper bar to lift the product with your child sitting in it. move it, follow the steps outlined below.
The storage basket is attached to the frame at several points. Unsnap the 2 buttons located on the rear of the basket (Fig. 4); remove the lateral straps on the rear legs of the stroller ( Fig. 4A); unsnap the buttons present under the seat (Fig. 4B); open the velcro straps on the front under the footrest (Fig. 4C). To reassemble the basket follow the same steps backwards.
HOW TO USE THE SAFETY HARNESS
This stroller has a five-point safety harness featuring two shoulder straps, two adjustment holes, a waist strap and a crotch strap with buckle.
WARNING: To use it with children from birth to approx. 6 months of age, you must use the shoulder straps, first threading them through two adjusting holes (Fig. 5), and threading the waist strap through the vertical holes ( Fig. 5A). The height of the shoulder straps can be adjusted by using the different slots found on the backrest.
After laying the child in the stroller, fasten the straps (Fig. 6) by passing first the two forks (A) inside the shoulder strap buckle (B) and then inside the crotch strap buckle (C); adjust the height of the shoulder straps so that they correctly fit your
child’s shoulders (Fig. 6A). Always make sure that the straps are fastened correctly. To unfasten the strap, press and pull the side prongs.
WARNING: To guarantee the safety of your child, the safety harness must be fastened at all times. To make sure that the belts are fastened properly to the anchoring points, after placing your child inside the stroller, pull the end parts of the belts firmly.

ADJUSTING THE BACKREST
The backrest can be adjusted to 3 positions.
To lower the backrest, lift the adjusting handle located on the rear of the backrest (Fig. 7). To raise the backrest, simply lift it to the desired position.
WARNING: The child’s weight can make these operations more difficult.
REAR BRAKES
The rear wheels have linked brakes, which can be applied simultaneously on both rear wheels by using the support tube.
To activate the brakes, press down on the pedal located centrally (Fig. 8). To release the brakes, press the pedal in the opposite direction (Fig. 8A).
SUN CANOPY
The hood is already installed on the stroller.
To open and adjust the canopy use the front arch (Fig. 9). The hood can be extended by opening the zipper (Fig. 9A-9B). Fix the back of the hood onto the backrest using the two snap fasteners (Fig. 9C) and the velcro fasteners on the sides (Fig. 9D). Should you wish to remove the canopy from the stroller,open the zip wrapped around the tube above the backrest (Fig. 9E) and, using a sharp object as a lever, lift the plastic component indicated while at the same time pulling up on the metal rod (Fig. 9F). Complete the operation by undoing the two buttons on the back of the backrest. Lift the fabric flap on the first segment (Fig. 9G) to access the mesh section for the summer months.

ADJUSTABLE LEGREST
The legrest can be used in 2 positions.
To use the legrest in the horizontal position simply push it upwards. To lower it, use the button located under the legrest (Fig. 10).

FITTING AND REMOVING THE STROLLER LINING
To remove the lining from the seat, follow the steps below:
Detach all the velcro fasteners and snap buttons that connect the backrest to the hood (Fig. 11A) and remove the straps on both sides from the plastic hooks that attach the backrest to the handle of the frame (Fig. 11B).
On the sides of the seat, remove the velcro fasteners (Fig. 12) and slip the fabric tab out from the plastic ring on the frame (Fig. 12A). Complete this operation for both sides of the stroller.
Remove the textile part of the legrest from the frame (Fig.13) and then the elastic strap (Fig. 13A). Remove the velcro on the elastic strap, located under the seat, and remove the strap from the buckle (Fig. 13B). Remove the pocket from the adjustment button for the backrest and pull all the fabric upwards (Fig. 13C – 13D). To put the lining back on the stroller follow the same steps backwards.
WARNING: When opening or closing the stroller, make sure that your child or other children are at a safe distance. Make sure that during these operations the moving parts of the stroller do not come into contact with your child. Before closing the stroller, ensure that the storage basket is empty. The stroller has a closing device that can be used with one hand.
To close the stroller, push switch “A” to the left and simultaneously press button “B” (Fig. 14) ; push down on the handle and the stroller will close automatically. The stroller will automatically lock in the closed position. When closed, the stroller stands up on its own (Fig. 14 A-B). To make the stroller even more compact when closed, the bumper bar can be turned towards the handle (Fig. 14C).

ACCESSORIES
WARNING: The accessories described below may not be included in some product versions. Carefully read the instructions for the accessories that came with the model you have purchased.
SHOULDER STRAPS AND CROTCH STRAPS
The stroller is fitted with padded shoulder straps and a soft crotch strap to ensure the safety and comfort of your child.
For assembly, insert the shoulder straps (Fig. 15) and the crotch strap in the relevant padding (Fig. 15A).

WARNING: Adjust the waist belt if necessary by pressing on the buckles.
WARNING: To guarantee the safety of your child, the safety harness must always be fastened.
RAIN COVER
To fit the rain cover, fasten the straps around the stroller’s frame in the positions shown in Fig. 16 (steps to be repeated on both sides of the stroller). When you have finished using the rain cover, allow it to dry properly if it is wet.

WARNING: The rain cover cannot be used on the stroller without the hood being extended, as it may cause suffocation.
WARNING: When the rain cover is fitted on the stroller, never leave it exposed to direct sunlight with your child inside, as the temperature will rise considerably.
USING THE CAR SEAT ON THE STROLLER
The following elements, which can be purchased separately, can be used with the Good Pro stroller:
- Kaily car seat
- Kiros i-Size/Kiros Evo i-Size car seat with Fast In fastening All car seats for use on the stroller require the special adaptors sold separately WARNING: FOR THE ASSEMBLY AND/OR USE OF THEITEMS LISTED ABOVE, REFER TO THE RELEVANT MANUALS. SOFT CARRYCOT MOUNTING AND REMOVAL FROM THE STROLLER
  The Goody PRO stroller is compatible with the Chicco Soft Carrycot. To attach the carrycot to the stroller, remove the bumper bar, completely lower the backrest and place the legrest in the horizontal position.
Turn the rod under the carrycot base until it is completely open (Fig. 17-17A); hold the handles in the transport position and place the carrycot on the stroller with the foot area facing the handle of the stroller (Fig. 17B).
Attach the carrycot to the stroller’s frame using the appropriate straps. The carrycot has two straps with a buckle on each side. Wrap the straps around the stroller frame in the positions shown in Figure 18, fasten the buckles (Fig. 18A) , pull the straps to ensure a secure attachment ( Fig. 18B) and close the second safety lock (Fig. 18C). Repeat the operations on the opposite side as well.

WARNING: Before use, make sure that the carrycot is properly attached by pulling it upwards. To remove the carrycot from the stroller, release the buckles and remove it from the seat.
WARNING: The fastening and releasing operations can be carried out with your child inside the carrycot; however, these operations may be more difficult to execute due to the child’s weight. Pay attention when carrying out the aforementioned operations.
REDUCER CUSHION
The Goody PRO stroller is equipped with a reducer cushion. Follow the assembly instructions below. Open the buttons for the hood located on the rear of the backrest and attach the buttons for the reducer cushion in their place (Fig. 19- 19A). The buttons for the hood can then be fastened to the buttons for the reducer cushion (Fig.19B). Have the safety harnesses pass through the slots on the reducer cushion (Fig. 19C) and, after placing the baby in the seat, fasten the safety harnesses to the buckle (Fig. 19D), as described in the paragraph on “Using the safety harnesses”.

WARNING: The reducer cushion must always be used with the buttons fastened to the backrest.
WARNING: The reducer cushion must always be used with the safety harnesses fastened.
WARNING: When carrying children up to 6 months of age with the reducer cushion installed, the shoulder straps must be passed through the two adjuster slots and the waist strap must be passed through the vertical slots.
WARNING: ALWAYS make sure that the reducer cushion does not obstruct the baby’s airways.

WARRANTY

The product is guaranteed against any lack of conformity under normal use as specified in the instructions. The warranty does not, therefore, apply to damage caused by improper use, wear or accidents. For the duration of the warranty against lack of conformity, see the specific provisions of applicable national laws in the country of purchase, where present.

ARTSANA UK Ltd. 2nd Floor 1 Imperial Place Maxwell Road Borehamwood Hertfordshire – WD6 1JN 0208 953 6627 (office hours)
www.CHICCO.co.uk

ARTSANA S.p.A. – Via Saldarini Catelli, 1 – 22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111 – Fax (+39) 031 382 400 – www.chicco.com

Chicco Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual >>