Rinfire R4 Somatosensory Gaming Gun User Manual
- June 4, 2024
- Rinfire
Table of Contents
Rinfire R4 Somatosensory Gaming Gun
Connecting to PlayStation
PlayStation3 / PlayStation4 / PlayStation4 Slim / PlayStation4 Pro :
-
Turn on the console.
-
Connect the Converter to the Rinbox and the original Controller as shown in the picture below, then connect the Converter to the PlayStation console.
-
After waiting for a few seconds, the indicator light on the converter will flash with a breathing light, which means the connection is successful. At this time, you can use the gaming gun to control the PlayStation console.
-
Launch and enter the game.
-
After entering the game, point the muzzle of the gaming gun to the center of the screen, then press and hold the MARK button on the gaming gun, at this time RinBox will make a beep sound, wait for the sound to end, release the MARK button, and you can use the gaming gun.
Connecting to Switch
Switch / Switch Lite :
- Turn on the Switch and Make sure the Pro Controller Wired Communication of Switch is on.
The settings are as follows:
System Settings —+ Controllers and Sensors —+ Pro Controller Wired Communication —+ On
-
Connect the Converter to the Rinbox in the picture below, then connect the Converter to the Switch console .
When connecting the Switch Lite, you need to purchase an additional USB to Type-C OTG adapter. -
After waiting for a few seconds, the indicator light on the converter will flash with a breathing light, which means the connection is successful. At this time, you can use the gaming gun to control the Switch console.
-
Launch and enter the game.
-
After entering the game, point the muzzle of the gaming gun to the center of the screen, then press and hold the MARK button on the gaming gun, at this time RinBox will make a beep sound, wait for the sound to end, release the MARK button, and you can use the gaming gun.
Connecting to PC
-
Go to www.rinfire.com and download the RinFire Assistant.
-
Install RinFire Assistant on your computer.
-
Plug the RinBox into the USB port of your computer.
-
Run RinFire Assistant and select the game platform. Most games select PC , but some PC games, such as The House of the Dead, select LIGHT GUN.
-
Click on GAMING GUN PROFILE.
-
Set the mapping between the gaming gun buttons and keyboard keys as needed.
-
Once the settings are complete, click SYNC TO GAMING GUN.
-
Launch and enter the game.
-
After entering the game, point the muzzle of the gaming gun to the center of the screen, then press and hold the MARK button on the gaming gun, at this time RinBox will make a beep sound, wait for the sound to end, release the MARK button, and you can use the gaming gun.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>