la Pavoni Casabar PID Coffee Machine Instruction Manual
- June 9, 2024
- La-Pavoni
Table of Contents
la Pavoni Casabar PID Coffee Machine
Product Information
The product is a coffee machine model called CASABAR PID. It has a removable cup holder grid, a portafilter, two filters for 1 and 2 cups, and a thermopid. The machine requires fresh and clean water to be filled in the water tank without exceeding the maximum level. The product has a display and buttons to adjust the temperature of the boiler and to program settings.
Product Usage Instructions
- Read the instruction manual carefully before using the machine.
- Follow the safety guidelines and regulations in your country and the instructions in the manual.
- Fill the water tank with fresh and clean water without exceeding the maximum level.
- Install the cup holder grid, portafilter, and filter according to the instructions in section 4.1 of the manual.
- Adjust the temperature of the boiler using the display and buttons. Be careful not to set it too high.
- Press the button to start brewing coffee or milk.
- Clean the external surfaces of the machine regularly with a soft and damp cloth after use.
- If any problems occur, refer to section 6 of the manual for troubleshooting tips or contact customer support.
Instructions for use of models
CASABAR PID
Dear Customer, Thank you for having purchased one of our products, which has been manufactured using the latest technological innovations. By carefully following some simple instructions regarding the correct use of our product in compliance with the essential safety instructions indicated in this manual, you will be able to obtain the best performance and enjoy the remarkable reliability of this product over the years. In case of faults, please contact one of our Service Centres that are at your disposal from now on
SYMBOLS USED IN THIS MANUAL
Important information is indicated by these symbols. It is imperative that you
comply with these instructions.
- Please read the instructions manual carefully before using the appliance.
- Caution! Particularly important and / or dangerous operations.
- Information (useful for using the appliance). Advice.
- Operations that can be carried out by the user.
- Operations that should only be carried out by a qualified technician.
INTRODUCTION TO THE MANUAL
INTRODUCTION
This instructions manual is an integral part of the machine. It should be read
carefully and kept readily available for reference for the entire service life
of the machine.
The manual contains information regarding the proper use of the machine, its
cleaning and maintenance. It also provides information about operations to be
carried out that require particular attention and possible residual risks.
The manual reflects the technological innovations at the time it was drafted.
The manufacturer reserves the right to make any necessary technical
modifications to its products and to update the manuals with no obligation to
revise previous versions.
LA PAVONI S.p.A. declines any liability for damage or injury that may be caused directly or indirectly to people or property due to:
- the failure to comply with all the requirements of current safety regulations
- incorrect installation
- defective power supply
- improper or incorrect use of the machine
- uses other than those specified in this manual
- lack of or incorrect maintenance
- unauthorised modifications or repairs
- the use of non original or non model-specific spare parts
- complete or partial failure to follow the instructions
- exceptional events
INSTRUCTIONS
SAFETY INSTRUCTIONS
- The user must comply with the safety regulations in force in the country where the machine is used, in addition to using common sense and the instructions provided in this manual.
- To ensure that machine works correctly and provides a long service, we recommend that you make sure that the environmental conditions are correct (room temperature should be between 5°C and 35°C). Avoid using the machine in places where jets of water are used or in outdoor environments that are exposed to the weather (sun, rain etc.).
- After removing the machine from its packaging, make sure that it is intact and has not been damaged.
- The packaging should be taken to a proper waste disposal centre. Under no circumstances should it be left unattended where children, animals or unauthorized persons may have access to it.
- Before switching on the machine, make sure that the power supply indicated on the data plate, located under the base of the machine, is the same as the one used in your country.
- The appliance must not be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge, unless appropriately supervised, or instructed on the safe use of the appliance by a person responsible for their safety.
- Children must be supervised at all times to ensure they do not play with the appliance.
- Cleaning and maintenance of the appliance must not be performed by children, unless closely supervised.
- Never submerge the appliance in water.
- This appliance is intended for household use. Moreover, it cannot be used:
- in kitchen areas provided for employees in shops, offices and other work environments
- in farms/farm accommodation
- by guests in hotels, motels and other types of residential accommodation
- in bed and breakfast accommodation.
- If the power cord is damaged, contact technical support to arrange for this to be replaced in order to avoid any possible hazards.
- Only for European markets: This appliance may be used by children from the age of 8 provided they are supervised or instructed on the safe use of the appliance and they understand the associated risks.
- Cleaning and maintenance may be performed by children from the age of 8 as long as they are appropriately supervised.
- Keep the appliance and its cord out of reach of children under the age of 8 years.
- Children must never play with the appliance.
- The appliance may be used by persons with reduced physical,
- sensory or mental capabilities or with a lack of experience and knowledge, if they are supervised or instructed on the safe use of the appliance and if they understand the hazards involved.
- Disconnect the appliance from the power socket before assembly, disassembly and cleaning.
- For this appliance: Read this user manual carefully before using the appliance.
- Switch off the appliance immediately after use.
- Do not leave the coffee machine unattended during use.
- Always disconnect the coffee machine from the power socket if it is left unattended and before assembly/disassembly of components or cleaning.
- Before connecting or disconnecting the machine, make sure that the ON/OFF switch is in the OFF position.
- Unplug the coffee machine before cleaning it and if you notice any fault.
- Let the coffee machine cool down before cleaning.
- Do not use the coffee machine without the tank fitted or if there is no water in the tank.
- Leave at least 3 cm of space between the coffee machine and any walls to the rear or side, and 15 cm clearance above the coffee machine.
- Danger of burns! The coffee machine generates heat and produces hot water and steam during its operation.
- Danger of burns! Do not touch the cup warmer shelf while the appliance is running.
- The surfaces of the appliance remain very hot after use due to residual heat. Do not touch the hot surfaces in order to avoid burns.
- Do not use the coffee machine with parts or accessories of other manufacturers.
- Only use original spare parts. The use of spare parts not approved by the manufacturer could lead to fires, electric shocks or personal injury.
- Only place the coffee machine on level and dry surfaces.
- Avoid getting the coffee machine wet and do not spray liquids onto it. In the event of contact with liquid, immediately switch off the power at the socket or main breaker and dry the appliance thoroughly: Electric shock hazard!
- Do not use harsh detergents or sharp objects to clean the coffee machine.
- Do not make any modifications to the appliance.
- Never try to put out a fire or flames with water: turn off the appliance and remove the plug from the socket, and smother the flames with a fire blanket or other appropriate cover.
- Prevent the power cord from coming into contact with sharp edges.
- Never position the appliance above or near gas or electric hob burners when they are hot or in use, inside an oven or near other heat sources.
- Do not position the appliance near sinks or taps.
INTENDED USE OF THE MACHINE
- This machine has been designed for the home preparation of espresso coffee using coffee blends, the production of hot water and/or steam, and the preparation of hot milk.
- In order to use the machine properly, the user must carefully read and understand the instructions provided in this manual.
- Any improper use of the machine will void the warranty and relieve the manufacturer of all liability for damage to property and / or injury to persons.
- Improper use includes:
- any use other than the one specified in the instructions manual
- any intervention carried out on the appliance that does not comply with the instructions given in this manual
- any use following unauthorized modifications to components or safety devices
- use of the appliance outdoors
PRODUCT END-OF-LIFE INSTRUCTIONS
Electrical appliances must not be disposed of together with household waste. Devices marked with this symbol are subject to European Directive 2012/19/ EU All waste electrical and electronic appliances must be disposed of separately from domestic waste and taken to authorised waste disposal facilities. Disposing of the used appliance correctly, will help to safeguard the environment and human health. For further information regarding the disposal of used appliances, please contact your local authority waste disposal department or the shop where the appliance was purchased.
DESCRIPTION
PRODUCT DESCRIPTION
- Water tank
- Cup warmer
- Pressure gauge
- Hot water / steam knob
- Group head
- Steam / hot water supply nozzle
- Removable drip tray grid
- Filter holder
- Filter – 1 cup
- Filter basket for 2 cups
- PID temperature controller
- Coff ee tamper
- Power on/off switch
- Machine on light
- Steam switch
- Light: machine ready
- Coffee / hot water dispensing switch 15a. Light: coffee / hot water dispensing switch
- Filter sealing membrane
- “Fascino” filter holder
- Coff ee scoop
USE
STARTING THE APPLIANCE
- Open the cover and fi ll the tank (1) with fresh clean water, taking care not to exceed the maximum level of the tank.
- Turn on the machine by placing the on / off switch (13) to position “I”. The lamp (13a) lights up to indicate that the machine is powered.
- Insert the filter holder (8 or 17) into the group head (5).
- Open the steam / hot water knob (4).
- Move the coffee / hot water switch lever (15) to position “I”. When water starts to come out of the steam nozzle (6), turn the hot water/coff ee switch lever (15) to position “0” and close the knob (4).
After having done this, rinse the internal circuits:
- Place a container under the coffee dispensing spouts and press the coffee / hot water dispensing button (14).
- Repeat this process 5 times.
- After rinsing, wait for the machine to reach operating temperature.
- The machine is ready for use when the PID temperature controller (11) reaches the pre-set temperature of 92°C, the ideal temperature for preparing coffee (if you wish to change the temperature of the PID temperature controller, follow the instructions in section 4.5) and the light (14a) remains on.
To avoid having to repeat this procedure, we recommend that you check the
level of water in tank (1) to prevent emptying the machine’s water circuit. If
it does happen, repeat the above procedure
The operating temperature light (14a) will continue to switch on and off
automatically during heating. After having switched on the machine, wait about
6 minutes for it to heat up before making the first coffee. For subsequent
cups, the machine will always be ready.
PREPARING ESPRESSO COFFEE
-
Make sure that you have carried out all the operations indicated in section 4.1 “starting the machine”.
-
To obtain a good cup of coffee, it is important that you use good quality, well-roasted and correctly ground coffee. The pump-type espresso coffee machine requires finely ground coffee. If the coffee is too coarsely ground, the coffee will be light colored and weak without froth and if the coffee is too finely ground the espresso will be dark and strong and have little froth.
-
We recommend that you grind
the coffee beans with a grinder immediately before making the coffee since the coffee quickly loses its aroma after it has been ground. -
Warm cups help maintain the coffee at the right temperature. We therefore recommended that you place the cups on the cup warmer shelf (2) before using them.
PRE-HEATING
- Make sure there is enough water in the tank (1).
- Depending on the number of cups of coffee you wish to make, place a onecup filter (9) or a two-cup filter (10) into the filter-holder (8 or 17) and insert the filter holder into the group head (5).
- Turn on the main switch (13), the power on light (13a) will come on to indicate that the machine is in operation.
- Wait until machine reaches the operating temperature in order to dispense a coffee, light (14a) lit.
PREPARING ESPRESSO COFFEE
- Remove the filter holder (8 or 17), fill the filter with one or two measures of ground coffee (one measure per cup) then level and press the coffee using the tamper (12).
- Remove any coffee residues from the edge of the filter using the palm of your hand and insert the filter holder (8 or 17) into the group head (5), moving it towards the right to secure it.
- Place one or two pre-warmed cups on the drip tray grid (7) under the filter holder.
- Turn on the coffee / hot water switch (15), the coffee will start to come out from the spouts of the filter holder (8). Once the required amount of coffee has been dispensed, stop delivery by turning off the switch (15) but do not remove the filter holder
- Remove the cups and serve immediately.
- After having made the coffee, remove the filter holder, empty the coffee grounds and rinse the filter holder under running water.
After having switched on the machine, wait about 6 minutes for it to heat up
to the operating temperature before dispensing the first coffee
We recommend that you dispense steam for a maximum of 30 seconds.
Do not touch the hot surfaces (boiler, group head, filter holder, steam supply
nozzle) to avoid burns.
Do not remove the filter holder while coffee is being dispensed to avoid
possible burns.
Under no circumstances place your hands under the group head or the steam
supply nozzle as the liquids or steam delivered are hot and may cause burns.
Do not remove the filter holder immediately after having dispensed coffee,
wait for a few seconds to allow any residual pressure to be released in order
to avoid possible burns.
DISPENSING STEAM
Steam can be used for frothing the milk for making cappuccinos or to warm up
drinks.
Caution! Danger of burns! Spurts of hot water may be ejected when you
first start to dispense steam
The nozzle can become extremely hot. Do not touch it directly with your hands.
- Prepare the espresso coffee in large cups as indicated in the previous sections.
- When the machine is ready to dispense coffee, direct the steam nozzle towards the drip tray (7) and open the “Hot water / steam knob” (4) for a few seconds in order to remove any residual water from the steam nozzle. After a few second only steam will come out.
- When only steam starts to come out, close the steam / hot water knob (4)
- Move the steam lever switch (14) to position “I”.
- After about 15-20 seconds and when the machine ready light (14a) comes on, place the container of cold milk under the steam nozzle (6).
- Slowly turn the steam knob (4) anticlockwise so that steam comes out.
- Once the volume of milk has doubled, immerse the frothing nozzle completely and heat the milk to 60-65°C.
- Once the milk has been frothed, turn the steam knob anticlockwise to stop dispensing steam and remove the milk container.
- Move the steam lever switch (14) to position “0”.
- Pour the frothed milk into the coffee.
- The more you turn the knob, the greater will be the steam pressure.
- We recommend that you dispense steam for a maximum of 60 seconds.
- To prepare another coffee, fill the boiler with water and bring the machine to the correct operating temperature. Otherwise, the coffee may have a burnt taste.
- Place an empty cup on the grid. Do not insert the filter holder. Fill the cup with water by moving the lever switch (15) to position “I”. Once the cup is full, move the coffee lever switch (15) to position “0”. It is now possible to brew more coffee.
HOT WATER
- Make sure that you have carried out all the operations in section 4.1.
- Place a container under the hot water / steam nozzle
- Open the knob (4) and move the coffee / hot water lever switch (15) to position “I”; water will immediately come out of the steam/hot water nozzle (6).
- Once the required amount of water has been dispensed, move the coffee / hot water lever (15) back to position “0” and close the knob (4).
- After dispensing hot water, make sure that there is still water in the tank (1).
REGULATING THE BOILER TEMPERATURE
- The LPSCSR02 model is fitted with a PID temperature controller (11).
- PID temperature controllers regulate the boiler temperature.
- The PID temperature controller is factory set to 92°C.
- To adjust the setting proceed as follows:
- press the button ; as soon as “PRG” appears on the display, press the button ;
- when the temperature of the boiler appears on the display, use the buttons and to set the temperature, from a minimum of 80°C to a maximum of 120°C.
- 3 seconds after having pressed the last button, the value is memorized and the display indicates the temperature.
If the temperature threshold is set too high, the display will start to flash when coffee is dispensed
CLEANING AND MAINTENANCE
- Before carrying out any cleaning or maintenance, unplug the power cable from the power outlet without pulling the cable.
- Do not immerse the coffee machine in water or other liquids.
- Let the coffee machine cool down before cleaning.
CLEANING THE FILTERS AND FILTER HOLDERS
- Regularly check the holes in the filters in order to remove any coffee deposits.
- Place approximately one litre ofboiling water and four teaspoons of coffee machine cleaner in a suitable container. Immerse the filters and filter holders in the solution for 20-30 minutes. Then rinse thoroughly under running water.
CLEANING THE STEAM NOZZLE
- To avoid altering the taste of the drinks to be heated and to prevent the hole at the end of the steam nozzle (6) from becoming clogged, after use, turn the steam knob to dispense a small amount of steam and remove any milk from the inside of the nozzle.
- Then clean thoroughly with a damp cloth.
CLEANING THE OUTSIDE OF THE MACHINE
To keep the outer surface of the coffee machine in good condition, it should be cleaned regularly after use. Let the appliance cool down first. Clean with a soft, damp cloth.
TROUBLESHOOTING
La Pavoni spa – via Privata Gorizia, 7 – San giuliano milanese (MI) – Italy
Telefono +39 02 98217.1
Fax +39 02 9821787
www.lapavoni.com
e-mail: espresso@lapavoni.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>