MeTra 107-HY1 Double Din Dash Installation Kit for Select Vehicles Instruction Manual
- June 4, 2024
- Metra
Table of Contents
MeTra 107-HY1 Double Din Dash Installation Kit for Select Vehicles
Hyundai Sonata2020-Up
Visit MetraOnline.com for more detailed information
about the product and up-to-date vehicle-specific applications.
KIT FEATURES
- Designed specifically for Pioneer modular 6.8” radios like the DMH-C2550NEX and DMH-C2500NEX. †† Refer to the radio manufacturer for current models
- Painted to match factory with a gloss black face, bright silver trim, and matte black back plate.
Note – Pioneer extension cable required for installation. Sold separately
KIT COMPONENTS
- Front panel
- Back panel
- Brackets
- Silver trim
-
8 x 3/8” Phillips screws (7)
- Panel clips (4)
WIRING & ANTENNA CONNECTIONS
(sold separately)
- Wiring Harness: Visit metraonline.com for audio/ video and steering wheel control interface options.
- Antenna Adapter: 40-KI10
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
DASH DISASSEMBLY
- Unclip the trim behind the radio and remove (2) Phillips screws exposed. (Figures A,B)
- Open the passenger door, then remove the trim panel from the side of the dashboard. Remove (1) Phillips screw exposed. (Figure C)
- Unclip and remove the trim directly below the radio. (Figure D))
- Remove (2) Phillips screws securing the a/c vent panel, then unclip, unplug, and remove. (Figure E)
- Remove (3) screws securing the radio. Unclip and slide the radio out, then unplug and remove. (Figure F)
KIT ASSEMBLY
Pioneer Modular DDIN radio provision
Note: For steps 1 and 2, reference the installation manual provided with
the radio for which hardware to use. The display screen and radio chassis use
two different types of screws.
- Secure the brackets to the radio chassis using (4) screws supplied with the radio. (Figure A)
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections tothe radio. Metra recommends using the proper mating adapter from Metra and/ or Axxess.
- Slide the radio assembly into to the dash, then secure using the factory screws. (NOTE – route screen cable to be connected later)
- Connect Pioneer extension cable to the radio display screen.
- Attach the (4) panel clips to the back panel (Figure B)
- Secure the radio screen display to the back panel using (4) of the screws supplied with the radio. (Figure C)
- Place the silver trim betwixt the back panel and the front panel. Assemble together using (7) of the included #8 x 3/8” screws. (Figure D)
- Connect the radio display to the radio chassis, clip the assembly into the dash, and secure with the factory hardware.
- Reassemble the dash in reverse order of disassembly to complete the installation.
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
[email protected]
Tech Support Hours (Eastern Standard Time)
- Monday – Friday: 9:00 AM – 7:00 PM
- Saturday: 10:00 AM – 7:00 PM
- Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.