AUVON LLR088 Alarm Clock Speaker User Manual
- June 9, 2024
- AUVON
Table of Contents
XUANZIT / XKX / YOFANQI
Alarm Clock Speaker
Model: LLR088
LLR088 Alarm Clock Speaker
1.1 ) Note Before Using
This alarm clock speaker needs to be plug in, there is no built-in
rechargeable battery.
1.2) Installation
Plug the USB adapter into an AC household outlet and plug the USB cable into
the DC jack on the bottom of the unit, then this alarm clock speaker is ready
to work for you.
1.3) Adjusting Display Brightness
Under normal condition, press button can adjust brightness of the LED display.
※ Adjustable Brightness: 6-Level
1.4) Switch 12/24 Hour Time Format
In time mode, single press button to switch 12/24-hour time format, the time
display will change correspondingly.
1.5) Setting Time
In time mode, press and hold button for 2 seconds to enter into time-setting
mode, the hour digits flash.
Press button to set hour (hold to advance rapidly).
Press button again, the minute digits flash. Press 0 button to set minute.
Press button again, the day digits flash.
Press button to set day.
Press button again, save and exit time-setting mode.
1.6) Switching Alarm ON/OFF
In time mode, single press button to switch on/off the alarm, the alarm’s icon
will be lighted on/off correspondingly.
1.7) Setting Alarm Time
In time mode, press and hold button for 2 seconds to enter into alarm-setting
mode, the hour digits flash.
Press button t o set hour (hold to advance rapidly).
Press button again, the minute digits flash.
Press button t o set minute.
Press button again, save and exit alarm-setting mode.
1.8) Setting Alarm Sound and Volume
An In time mode, press and hold button for 2 seconds to enter into alarm-
sound-setting mode. Then the alarm sound will be playing.
Press button to switch alarm sound. )
※ Optional Sound: 6 Beep Sounds
Press button again, the volume digits flash.
Press button to adjust alarm volume. XAdjustable Volume: 6-Level
Press button again, save and exit alarm-sound-setting mode.
1.9) Stop Alarm When I t Goes off
When alarm is sounding, press any buttons (except SNOOZE) to stop and reset
the alarm to go off the next day .
1.10) Activate Snooze When Alarm Goes off
When alarm is sounding, press button, then the alarm will suspend and go off
again after the set snooze time.
1.11) Setting Snooze Time
In time mode, press and hold button for 2 seconds to enter into snooze-time-
setting mode and the digits flash.
Press button to set the snooze time.
※ Snooze Time: Default 9 minutes (1~15 minutes adjustable)
Press button again, save and exit snooze-time-setting mode.
BT Speaker / Natural Sound
2 .1) Tarn on/off the Speaker
Press and hold button for 2 seconds to turn on/off the speaker.
※ When turned on, the speaker will automatically connect to the last paired device if available. If not, it will enter pairing mode.
2.2 ) Fow to Use the Speaker
After turned on the speaker, single press button to switch Bluetooth mode and
Natural-Sound mode.
When the speaker is on, single press button to play/pause the sound.
When the speaker is on, single press button to adjust the volume.
※ Sound Volume: 16-Level
When the speaker is on, long press button can switch to Previous/Next song or
natural sound.
※ Natural Sound: 7 Sounds (White Noise | Bonfire Night | Ocean Waves | Spring
Rain | Flowing Water | Summer Night | Early Birds)
2.3) Wireless Connection
Pairing Name: Alarm Clock Speaker BT Version: 5.3 | Efficient Wireless Range:
10Ft
2.4) Status of The BT Indicator
| Blinking| Pairing Mode / BT Disconnected
---|---|---
Always on| Bluetooth Connected
※ The Bluetooth Speaker will be turned off automically if no connection within 5 minutes.
2.5 ) Setting Auto-off Sleep Timer
When the speaker is on, press and hold the button for 2 seconds to enter into
Auto-off-Timer setting mode and the digits flash.
Press button to set the time.
※ Auto-off Timer: 1~90 minutes adjustable.
When it is in setting status, press and hold the button for 2 seconds can
switch off the timer.
Press
button again, save and exit Auto-off-Timer setting mode. The speaker will
automatically turn off after the time i s up.
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2.This equipment complies with RF radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.