Tuddrom T19 TWS Earphones User Manual

Tuddrom T19 TWS Earphones

User Guide
Thank you for choosing the T19″True Wireless Earbuds developed by Tuddrom! To better use this product, please read the Quick Start Guide carefully before using and properly managing it.

Product Specifications

How to connect

Earbuds power-on/power-off

• Power-on
  The charging case is opened and the earbuds is automatically turned on. In the power-off state, hold down the MFB button for three seconds to power on the earbuds. Red and white indicators will be lighted for 1s. There is a beep sound once it is power-o

• Power-off
  Put the earbuds in the charging case cover and the earbuds is automatically turned off. In a power-on state, hold down the MFB button for 5s. Red and white indicators will be ighted for 1s. There is a beep sound upon power-off.

• Pairing (first use)
  Open the charging case cover, and the red and white indicators on the left and right earbuds flash quickly, then pair the left and right ears, and wait for about 108. After the pairing is successful, the red and blue indicators on the lett and right ears flash siowly and the phone is going into pairing mode. Enable the Bluetooth function on the phone. Search for the Bluetooth device Tuddrom T19. Select Connect. After the connection is successful, a “Connected” message is displayed.

How to charge

• Charging the charging case
  Please use a 5V-1A low-power charger for charging. During charging, the charging LED flashes white. When power is on, the white light is always on. (t takes about 1.5 hours to fully charge the charging case).

• Charging the earbuds
  Please put the left / right earbuds into the charging case correctly, and then close the charging case. The indicator of the charging case is on. At this time, the red indicator on the left/right earbuds will light up for charging. When the earbuds are fully charged, the red indicator light will go out. It takes about 1 hour to fully charge the earbuds. A fully-charged charging case for the earbuds charges about 3 cycles.

• Low battery level indication
  When the earbuds have a low battery, the Bluetooth status indicator will turn to an red indicator and flash slowly, and you can hear the low battery show sound.

How to use

• Earbuds power-on: The charging case is opened and the earbuds is automatically turned on.(Or hold down the MFB for 3s in power-off state.)
• Earbuds power-off: The earbuds is placed in the charging case and the earbuds is automatically turned off. (Or hold down the MFB for 5s in power-on state.)
• Play/Pause: Click on the left or right earbud.
• Previous/Next: Long press on the left for 2 seconds/ Long press on the right for 2 seconds
• Volume+/ volume -: Double click on the left / Double click on the right SiRi function: Three-click the left or right ear to wake up the SiRi function in the connected state.
• Answer/Hang up a call: Short press the left or right button Reject a call: Long press 1S left or right button.
• Clear pairing information: Long press the MFB for 8s in power-off mode to clear pairing information.
• Secure pairing: if the Bluetooth device connected to the earbuds runs a version lower than 3.0, a password is required. Enter the default security code 0000 to pair the earbuds with your phone.
• Automatic power-off: To save power, when the earbuds is disconnected from the phone, the earbuds will automatically power off after 3 minutes. When the earbuds enters the pairing state for 3 minutes, if the pairing fails, it will automatically power off. Reset: Put the earbuds into the charging case.

 Important safety information

Caution : If you do not intend to use the headset for a long time, charge the headset once every 20 to 30 days to ensure its expected service life.

• Don’t remove or replace the Battery. including sensitive electronic components, including a battery,.and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat or liquid. Don’t use damaged batteries and electronic components.
• Disposal and recycling information
• Don’t treat the product and battery as household waste or as a fire. When you decide to dispose of the product and its battery, please follow the local environmental laws to handle the battery to avoid an explosion.
• Medical device interference.
• The product contains components and radios that emit electromagnetic fields and also contains magnets. These electromagnetic fields and magnets may interfere with pac- emakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using the product if you SUspect it is interfering with your pacemaker, defibrillator, or any other medical device.

EU Declaration of Conformity

Hereby, Dongguan Tuddrom Electronics Co., Ltd declares that the radio equipment of type Bluetooth Tuddrom T19 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.uiisii.com/doc/

Caution:
Use the Bluetooth Earphone in an environment with a temperature between -10C and 40C. The product shall only be connected to a USB interface of version USB2.0 or higher and the connection to a power USB is prohibited. For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>