OUTWATER INDUSTRIES PDC-MO-300-BK PDC Modules Instruction Manual
- June 9, 2024
- OUTWATER INDUSTRIES
Table of Contents
OUTWATER INDUSTRIES PDC-MO-300-BK PDC Modules
Product Information
PDC-MO-300-BK
The PDC-MO-300-BK is a data bezel designed for use in work surfaces. It
allows for easy access to data ports while keeping them hidden when not in
use. The product comes with a data insert and a power cord.
WHAT’S INCLUDE
OVERVIEW
Product Usage Instructions
- Access the data bezel(s) through the rear access opening and slightly lift the bottom clip to remove the bezel(s) from the unit.
- Guide the data cable to the rear access opening.
- Assemble the data insert. Snap the data insert to the bezel and snap the bezel back into the unit.
- Make a cutout in the desired work surface location.
- Guide the power cord through the cutout.
- Install the unit into the cutout and make sure it is fully leveled onto the surface.
- Secure the unit by sliding the locking clips on both ends below the work surface.
Please note that Outwater Industries, Inc. assumes no liability for improper installation. It is recommended to seek professional assistance if unsure about installation.
INSTALLATION INSTRUCTION
- Access the data bezel(s) through the rear access opening and slightly lift the bottom clip to remove the bezel(s) from the unit.
- Guide the data cable to the rear access opening. Assemble the data insert. Snap the data insert to the bezel and snap the bezel back into the unit.
- Make a cut out in the desired work surface location.
- Guide the power cord through the cut out. Install the unit into the cut out and make sure it is fully leveled onto the surface. Secure the unit by sliding the locking clips on both ends below the work surface.
24 River Road • Bogota, NJ 07603 | Phone: 1.800.631.8375 | Fax: 1.800.888.3315 | www.outwater.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>