chicco 05079340400000 Pocket Snack Booster Seat User Manual

: June 9, 2024
: chicco

Table of Contents

COMPONENTS
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

chicco 05079340400000 Pocket Snack Booster Seat

05079340400000 Pocket Snack Booster Seat

COMPONENTS

A – Backrest
B – Seat
C – Arms
D- Backrest release buttons
E – Safety belts
Components
F – Removable tray
G –Tray support central fastening button
H – Tray fastening stabilisers
I – Lower fastening straps
J – Height adjustable legs

K – Height adjusting button
L – Anti-slip support feet

M – Rear fastening straps
N- Handle for transport

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING : BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN.

Only for domestic use.

WARNING: Never leave the child unattended.
WARNING: Always use the restraint system and ensure it is correctly fitted.
WARNING: Always use the chair attachment system and ensure it is correctly fitted before use.
WARNING: Always check the security and the stability of the product on the adult chair before use.
WARNING: Do not use this product on stools or benches.
WARNING: This product is intended for children able to sit up unaided (minimum 6 months) and up to 3 years or a maximum weight of 15 kg.
The minimum recommended adult’s chair dimensions when using this product are: Seat width 280 mm; seat depth 320 mm; backrest height 280 mm.
Ensure that the adult chair with the chair mounted seat is placed in a position where the child is not able to use its feet to push against the table or any other structure as this can cause the tip over of the adult chair supporting the chair mounted seat.
Do not use the chair mounted seat if any part is broken, torn or missing.
Do not use accessories or replacement parts other than those approved by the manufacturer.
Never use the chair mounted seat on broken or unstable chairs, folding chairs, rocking chairs or chairs with armrests.
Do not use the the chair mounted seat for more than one child at a time.
Before fastening the chair mounted seat seat to the chair, always check that the floor and chair seat are perfectly horizontal; never install the product on chairs which are positioned on a sloping surface.
Do not let other children play unattended near the chair mounted seat.
Do not install the product on high chairs.
Do not use the product to transport the child in the car.
It is dangerous to use this product on an elevated surface.
Do not leave on chair mounted seat small objects that can be swallowed by children.
Do not use the chair mounted seat in the vicinity of curtain cords, windows or heat sources.
Never use the product as a swimming aidor floating chair in a swimming pool.
Do not use the chair mounted seat positioned directly on the floor.
Prolonged exposure to direct sunlight may cause the fabric to fade. After prolonged exposure of the cot to high temperatures, wait a few minutes before placing the child into it.
When not in use, the chair mounted seat must be kept out of the reach of children.
Opening, adjusting and closing operations of the booster seat must be carried out exclusively by an adult.
WARNING: when opening and closing, make sure the child is at a safe distance.
During adjusting operations, make sure the moving parts of the booster seat do not come into contact with the child’s body.
WARNING : the use of the waist safety belts with fabric crotch strap is essential to ensure your child’s safety.
WARNING: the tray alone does not guarantee the safe containment of the child. Always use the safety belts!
Do not open and close the booster seat when the child is sitting on it

ADVICE FOR CLEANING AND MAINTENANCE:
Cleaning and maintenance operations must be carried exclusively by an adult.
Check the booster seat on a regular basis for any cracks, damage or missing parts; if anything is visible or not working correctly do not use the seat.
Clean the plastic parts with a water dampened cloth. The tray can be washed in the dishwasher.

INSTALLATION

Unhook the lower fastening straps as shown in figure 1;
Detach the tray from the booster seat, by pulling outwards on the relative side handles, as shown in figure 2;
Lift the backrest as shown in figure 3 and lock it in the vertical position (you will hear a ‘’click’’ indicating the right position has been reached).
The booster seat can be adjusted to 3 different heights; to raise the seat height, after removing the child from the booster seat, grasp the seat and pull it upward, making sure to act as counter-weight, grabbing one of the front feet (figure 5). You will hear a ”click” at each position, to confirm the proper locking of the seat at the required height.

To lower the height, press and slightly pull forward the button located under the seat as shown in figure 6.

WARNING : Always perform these operations after removing the child from the booster seat.
Position the seat on the chair (figure 7); to use this product, the chair should have the minimum sizes indicated in figure 8. Attach the rear fastening straps, by passing them behind the chair’s backrest, as shown in figure 9, and the lower fastening straps around the seat as shown in figure 10; make sure to hear a “Click”, to indicate the proper locking.

Pull the free end of the lower and rear straps to adjust the length, until they are properly pulled tight and the seat is securely anchored to the chair (figure 11).
Once the booster seat is fastened securely to the chair’s seat and backrest, you can place your child in to it as follows:
a. Unfasten the buckle of the three-point safety belts as indicated in figure 12A.

b. Position the child on the booster seat, fastening them in with the safety belts. Check that the belts and buckle are fastened properly (figure 12B).
Attached the tray to the booster seat side supports, pulling outwards on the relative side handles, securing it through the central fastening buttons located on both sides of the booster seat (see figure 13A/13B). The stabilisers present to the sides of the central fastening button are used to stabilise the tray; make sure that the tray is fastened to the central fastening button in at least one point, and never just to the stabilisers only (figure 13C). The tray can be adjusted in 3 different positions (figure 13D).

FOLDING AND TRANSPORT
Detach the tray, pulling outwards on the relative side handles as explained in point 2.
Adjust the seat bringing it to the lowest point, as explained in point 4.
Press the backrest’s locking buttons located on the arms of the booster seat at the same time, and pull the arms forward until the backrest is completely folded (figure 14).
Secure the tray to the buttons, positioning it as shown in figure 15, in order to make the product as compact as possible for transport.
Fasten the lower fastening straps, passing them over the tray as shown in figure 16.
It is possible to conveniently transport the seat using the rear straps as shown in figure 17. To do so, adjust the length of the straps, as needed. Alternatively, use the transport handle located on the rear side of the seat (figure 18).

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions.
The warranty shall not therefore apply in the case of damage caused by improper use, wear or accidental events.
For the duration of the warranty on conformity defects please refer to the specific provisions of applicable national laws in the country of purchase, where appropriate.

ARTSANA UK Ltd.
2nd Floor
1 Imperial Place
Maxwell Road
Borehamwood
Hertfordshire – WD6 1JN
0208 953 6627 (office hours)
www.CHICCO.uk.com

International ARTSANA S.p.A.
Via Saldarini Catelli, 1
22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.CHICCO.com